CuZn40Pb2Sn1 (C85800) Naval Brass, Gravity Die-Cast Material Data Sheet

CuZn40Pb2Sn1 (C85800) Naval Brass Material Data Sheet (Cast, Gravity Die-Cast)

CuZn40Pb2Sn1 C85800 Gravity Die-Cast Overview

CuZn40Pb2Sn1 C85800 gravity die-cast is a cast brass (UNS C85800), known as naval brass. Condition: Gravity Die-Cast. This CuZn40Pb2Sn1 C85800 gravity die-cast material data sheet covers its designation, chemical composition, physical, mechanical, thermal, electrical and magnetic properties, processing and corrosion behaviour, and standards with similar compositions. Looking for CuZn40Pb2Sn1 brass castings from Turkey (Türkiye)? Modulus Metal supplies CuZn40Pb2Sn1 brass castings with in-house CNC machining and inspects them before shipment.

CuZn40Pb2Sn1 Designation

CuZn40Pb2Sn1
UNS numberC85800
ISO nameCuZn35Pb1Sn1

CuZn40Pb2Sn1 Typical uses

Accurate general-purpose castings, food & pickling plant especially when machined.

CuZn40Pb2Sn1 C85800 Gravity Die-Cast Composition detail

Al (aluminum)0–0.5%
As (arsenic)0–0.05%
Cu (copper)57–66%
Fe (iron)0–0.5%
Mn (manganese)0–0.25%
Ni (nickel)0–0.5%
P (phosphorus)0–0.01%
Pb (lead)0–1.5%
S (sulfur)0–0.05%
Sb (antimony)0–0.05%
Si (silicon)0–0.25%
Sn (tin)0–1.5%
Zn (zinc)31–41%

CuZn40Pb2Sn1 Physical properties

Density7.92–8.08g/cm3

CuZn40Pb2Sn1 C85800 Gravity Die-Cast Mechanical properties

Young’s modulus91.1–92.9GPa
Specific stiffness11.3–11.7MN.m/kg
Yield strength (elastic limit)200–220MPa
Tensile strength360–400MPa
Specific strength25–27.5kN.m/kg
Elongation10–20% strain
Compressive strength90–120MPa
Flexural modulus91.1–92.9GPa
Flexural strength (modulus of rupture)90–120MPa
Shear modulus33.7–34.4GPa
Bulk modulus98.4–100GPa
Poisson’s ratio0.34–0.35 
Shape factor26
Hardness – Vickers60–70HV
Elastic stored energy (springs)218–263kJ/m3
Fatigue strength at 10^7 cycles147–159MPa
Fatigue strength model (stress range)
Parameters: Stress Ratio = -1, Number of Cycles = 1e7cycles
135–173MPa

CuZn40Pb2Sn1 Impact & fracture properties

Fracture toughness70.4–79.2MPa.m0.5
Toughness (G)54–68kJ/m2

CuZn40Pb2Sn1 C85800 Gravity Die-Cast Thermal properties

Melting point882–902°C
Maximum service temperature120–130°C
Minimum service temperature-273  °C
Thermal conductivity80.5–87.3W/m.°C
Specific heat capacity373–375J/kg.°C
Thermal expansion coefficient20.1–20.5µstrain/°C
Thermal shock resistance107–118°C
Thermal distortion resistance3.96–4.31MW/m
Latent heat of fusion220–240kJ/kg

CuZn40Pb2Sn1 Electrical properties

Electrical resistivity8.4–8.8µohm.cm
Electrical conductivity19.6–20.5%IACS
Galvanic potential-0.33–-0.25V

CuZn40Pb2Sn1 Magnetic properties

Magnetic typeNon-magnetic

CuZn40Pb2Sn1 Optical, aesthetic and acoustic properties

TransparencyOpaque
Acoustic velocity3370–3420m/s
Mechanical loss coefficient (tan delta)2.78e-4–4.94e-4 

CuZn40Pb2Sn1 Processing properties

Metal castingAcceptable
Metal cold formingUnsuitable
Metal hot formingUnsuitable
Metal press formingUnsuitable
Metal deep drawingUnsuitable
Machining speed97.5 m/min
Weldability
Notes: Preheating and post weld heat treatments are required, and contains hazardous elements
Poor

CuZn40Pb2Sn1 Durability

Water (fresh)Excellent
Water (salt)Excellent
Weak acidsAcceptable
Strong acidsUnacceptable
Weak alkalisExcellent
Strong alkalisExcellent
Organic solventsExcellent
Oxidation at 500CLimited use
UV radiation (sunlight)Excellent
Galling resistance (adhesive wear)Excellent
FlammabilityNon-flammable

CuZn40Pb2Sn1 C85800 Gravity Die-Cast Corrosion resistance

Stress corrosion cracking
Note: Rated in ammoniacal; Other susceptible environments: Water, amine, dinitrogen tetroxide
Highly susceptible

CuZn40Pb2Sn1 Notes

CuZn40Pb2Sn1 C85800 Gravity Die-Cast Other notes
(s)=soft; (1/2 h)=half hard; (h)=hard; (xh)=extra hard; (hr) = hot rolled; (w)=soln heat-trtd; (wh)=soln heat-trtd & work hdnd; (wp)=soln heat-trtd & precip hdnd; (whp)=precip hdnd after cold-wkng; (wph)=work hdnd after precip hdng.

CuZn40Pb2Sn1 Standards with similar compositions

USA: C85800, C85800 to ASTM B30, UNS C85800
Tradenames: KRAMER DIE CAST YELLOW BRASS, M AND A NO. 18, PRESSURE DIE CASTING, PROMET 406, TECHNI-CAST YB2, TYB-2