FLEXIBLE
Neoprene
Nitrile
Polyurethane
Silicones
RIGID
Acrylic
Anaerobic
Cyanoacrylates
Epoxy
Inorganic
Phenolic
Polyester
Polysulfide
SOLVENT BONDING
USEFUL INFO
List of EN Standards for Adhesives:
| Standard No | Standard |
|---|---|
| EN 204:2016 | Classification of thermoplastic wood adhesives for non-structural applications |
| EN 205:2016 | Adhesives – Wood adhesives for non-structural applications – Determination of tensile shear strength of lap joints |
| EN 301:2013 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures – Classification and performance requirements |
| EN 302-1:2013 | Adhesives for load-bearing timber structures – Test methods – Part 1: Determination of longitudinal tensile shear strength |
| EN 302-2:2017 | Adhesives for load-bearing timber structures – Test methods – Part 2: Determination of resistance to delamination |
| EN 302-3:2017 | Adhesives for load-bearing timber structures – Test methods – Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| EN 302-4:2017 | Adhesives for load-bearing timber structures – Test methods – Part 4: Determination of the effects of wood shrinkage on the shear strength |
| EN 302-5:2013 | Adhesives for load-bearing timber structures – Test methods – Part 5: Determination of maximum assembly time under referenced conditions |
| EN 302-6:2013 | Adhesives for load-bearing timber structures – Test methods – Part 6: Determination of the minimum pressing time under referenced conditions |
| EN 302-7:2013 | Adhesives for load-bearing timber structures – Test methods – Part 7: Determination of the working life under referenced conditions |
| EN 302-8:2017 | Adhesives for load-bearing timber structures – Test methods – Part 8: Static load test of multiple bond line specimens in compression shea |
| EN 542:2003 | Adhesives – Determination of density |
| EN 543:2003 | Adhesives – Determination of apparent density of powder and granule adhesives |
| EN 827:2005 | Adhesives – Determination of conventional solids content and constant mass solids content |
| EN 828:2013 | Adhesives – Wettability – Determination by measurement of contact angle and surface free energy of solid surface |
| EN 923:2015 | Adhesives – Terms and definitions |
| EN 924:2003 | Adhesives – Solvent-borne and solvent-free adhesives – Determination of flashpoint |
| EN 1067:2005 | Adhesives – Examination and preparation of samples for testing |
| EN 1238:2011 | Adhesives – Determination of the softening point of thermoplastic adhesives (ring and ball) |
| EN 1239:2011 | Adhesives – Freeze-thaw stability |
| EN 1240:2011 | Adhesives – Determination of hydroxyl value and/or hydroxyl content |
| EN 1241:1998 | Adhesives – Determination of acid value |
| EN 1242:2013 | Adhesives – Determination of isocyanate content |
| EN 1243:2011 | Adhesives – Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| EN 1244:1998 | Adhesives – Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| EN 1245:2011 | Adhesives – Determination of pH |
| EN 1246:1998 | Adhesives – Determination of ash and sulphated ash |
| EN 1372:2015 | Adhesives – Test method for adhesives for floor and wall coverings – Peel test |
| EN 1373:2015 | Adhesives – Test method for adhesives for floor and wall coverings – Shear test |
| EN 1392:2006 | Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions |
| EN 1464:2010 | Adhesives – Determination of peel resistance of adhesive bonds – Floating roller method |
| EN 1465:2009 | Adhesives – Determination of tensile lap-shear strength of bonded assemblies |
| EN 1719:1998 | Adhesives for paper and board, packaging and disposable sanitary products – Tack measurement for pressure sensitive adhesives – Determination of loop tack |
| EN 1720:1998 | Adhesives for paper and board, packaging and disposable sanitary products – Determination of dispersability |
| EN 1721:1998 | Adhesives for paper and board, packaging and disposable sanitary products – Track measurement for pressure sensitive adhesives – Determination of rolling ball track |
| EN 1841:1998 | Adhesives – Test methods for adhesives for floor coverings and wall coverings – Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
| EN 1895:2001 | Adhesives for paper and board, packaging and disposable sanitary products – 180° – “T” peel test for a flexible-to-flexible assembly |
| EN 1895:2001/AC:2007 | Adhesives for paper and board, packaging and disposable sanitary products – 180°-“T” peel test for a flexible-to-flexible assembly |
| EN 1896:2001 | Adhesives for paper and board, packaging and disposable sanitary products – Determination of tensile strength and elongation |
| EN 1902:2015 | Adhesives – Test method for adhesives for floor and wall coverings – Shear creep test |
| EN 1903:2015 | Adhesives – Test method for adhesives for plastic or rubber floor coverings or wall coverings – Determination of dimensional changes after accelerated ageing |
| EN 1937:1999 | Test method for hydraulic setting floor smoothing and/or levelling compounds – Standard mixing procedures |
| EN 1939:2003 | Self adhesive tapes – Determination of peel adhesion properties |
| EN 1942:2008 | Self adhesive tapes – Measurement of Thickness |
| EN 1943:2002 | Self adhesive tapes – Measurement of static shear adhesion |
| EN 1944:1996 | Self-adhesive tapes – Measurement of unwind adhesion at low speed |
| EN 1945:1996 | Self-adhesive tapes – Measurement of quick stick |
| EN 1965-1:2011 | Structural adhesives – Corrosion – Part 1: Determination and classification of corrosion to a copper substrate |
| EN 1965-2:2011 | Structural adhesives – Corrosion – Part 2: Determination and classification of corrosion to a brass substrate |
| EN 1966:2009 | Structural adhesives – Characterization of a surface by measuring adhesion by means of the three point bending method |
| EN ISO 8510-2:2010 | Adhesives – Peel test for a flexible-bonded-to-rigid test specimen assembly – Part 2: 180 degree peel (ISO 8510-2:2006) |
| EN ISO 9142:2003 | Adhesives – Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) |
| EN ISO 9311-1:2005 | Adhesives for thermoplastic piping systems – Part 1: Determination of film properties (ISO 9311-1:2005) |
| EN ISO 9311-2:2011 | Adhesives for thermoplastic piping systems – Part 2: Determination of shear strength (ISO 9311-2:2011) |
| EN ISO 9311-3:2005 | Adhesives for thermoplastic piping systems – Part 3: Test method for the determination of resistance to internal pressure (ISO 9311-3:2005) |
| EN ISO 9653:2000 | Adhesives – Test method for shear impact strength of adhesive bonds (ISO 9653:1998) |
| EN ISO 9664:1995 | Adhesives – Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993) |
| EN ISO 9665:2000 | Adhesives – Animal glues – Methods of sampling and testing (ISO 9665:1998) |
| EN ISO 10363:1995 | Hot-melt adhesives – Determination of thermal stability (ISO 10363:1992) |
| EN ISO 10365:1995 | Adhesives – Designation of main failure patterns (ISO 10365:1992) |
| EN ISO 11339:2010 | Adhesives – T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| EN ISO 11343:2005 | Adhesives – Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions – Wedge impact method (ISO 11343:2003) |
| EN 12023:1996 | Self-adhesive tapes – Measurement of water transmission in a warm humid atmosphere |
| EN 12024:1996 | Self-adhesive tapes – Measurement of resistance to elevated temperature and humidity |
| EN 12025:1996 | Self-adhesive tapes – Measurement of tear resistance by the pendulum |
| EN 12026:1996 | Self-adhesive tapes – Measurement of the unwinding force at high speed |
| EN 12027:1996 | Self-adhesive tapes – Measurement of flame resistance |
| EN 12028:1996 | Self-adhesive tapes – Measurement of elongation under static load |
| EN 12029:1996 | Self-adhesive tapes – Determination of the water-soluble corrosive ions |
| EN 12030:1996 | Self-adhesive tapes – Measurement of impact resistance |
| EN 12031:1996 | Self-adhesive tapes – Measurement of bursting strength |
| EN 12032:1996 | Self-adhesive tapes – Measurement of bonding of thermosetting adhesive tapes during curing |
| EN 12033:1996 | Self-adhesive tapes – Measurement of bonding of thermosetting adhesive tapes after curing |
| EN 12034:1996 | Self-adhesive tapes – Measurement of the length of a roll of adhesive tape |
| EN 12035:1996 | Self-adhesive tapes – Flagging of adhesive tape |
| EN 12036:1996 | Self-adhesive tapes – Solvent penetration into adhesive masking tapes |
| EN 12092:2001 | Adhesives – Determination of viscosity |
| EN 12436:2001 | Adhesives for load-bearing timber structures – Casein adhesives – Classification and performance requirements |
| EN 12481:2000 | Self adhesive tapes – Terminology |
| EN 12701:2001 | Structural adhesives – Storage – Determination of words and phrases relating to the product life of structural adhesives and related materials |
| EN 12702:2000 | Adhesives for paper and board, packaging and disposable sanitary products – Determination of blocking behaviour of potentially adhesive layers |
| EN 12703:2016 | Adhesives for paper and board, packaging and disposable sanitary products – Determination of low temperature flexibility or cold crack temperature |
| EN 12704:2016 | Adhesives for paper and board, packaging and disposable sanitary products – Determination of foam formation for aqueous adhesives |
| EN 12705:2011 | Adhesives for leather and footwear materials – Determination of colour change of white or bright coloured leather surfaces by migration |
| EN 12706:1999 | Adhesives – Test methods for hydraulic setting floor smoothing and/or levelling compounds – Determination of flow characteristics |
| EN 12765:2016 | Classification of thermosetting wood adhesives for non-structural applications |
| EN 12960:2001 | Adhesives for paper and board, packaging and disposable sanitary products – Determination of shear resistance |
| EN 12960:2001/AC:2007 | Adhesives for paper and board, packaging and disposable sanitary products – Determination of shear resistance |
| EN 12961:2001 | Adhesives for leather and footwear materials – Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives |
| EN 12961:2001/A1:2005 | Adhesives for leather and footwear materials – Determination of optimum activation temperatures and maximum activation life or solvent-based and dispersion adhesives |
| EN 12962:2011 | Adhesives – Determination of elastic behaviour of liquid adhesives (elasticity index) |
| EN 12963:2001 | Adhesives – Determination of free monomer content in adhesives based on synthetic polymers |
| EN 12964:2001 | Adhesives for leather and footwear materials – Lasting adhesives – Testing heat resistance of bonds at increasing temperature |
| EN 13408:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds – Determination of bond strength |
| EN 13409:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds – Determination of setting time |
| EN 13415:2010 | Test of adhesives for floor covering – Determination of the electrical resistance of adhesive films and composites |
| EN ISO 13445:2006 | Adhesives – Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003) |
| EN 13872:2004 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds – Determination of dimensional change |
| EN 13887:2003 | Structural Adhesives – Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
| EN 13999-1:2013 | Adhesives – Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application – Part 1: General procedure |
| EN 13999-2:2013 | Adhesives – Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application – Part 2: Determination of volatile organic compounds |
| EN 13999-3:2007+A1:2009 | Adhesives – Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application – Part 3: Determination of volatile aldehydes |
| EN 13999-4:2007+A1:2009 | Adhesives – Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application – Part 4: Determination of volatile diisocyanates |
| EN 14022:2010 | Structural Adhesives – Determination of the pot life (working life) of multi-component adhesives |
| EN 14256:2007 | Adhesives for non-structural wood applications – Test method and requirements for resistance to static load |
| EN 14257:2006 | Adhesives – Wood adhesives – Determination of tensile strength of lap joints at elevated temperature (WATT ’91) |
| EN 14258:2004 | Structural adhesives – Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
| EN 14259:2003 | Adhesives for floor coverings – Requirements for mechanical and electrical performance |
| EN 14292:2005 | Adhesives – Wood adhesives – Determination of static load resistance with increasing temperature |
| EN 14293:2006 | Adhesives – Adhesives for bonding parquet to subfloor – Test methods and minimum requirements |
| EN 14294:2010 | Adhesives for leather and footwear materials – Preparation of bonded test pieces by moulding-on processes |
| CR 14376:2002 | Adhesives – Adhesives for paper and board, packaging and disposable sanitary products – Description and assessment of the setting process |
| EN 14410:2003 | Self adhesive tapes – Measurement of breaking strength and elongation at break |
| EN 14444:2005 | Structural adhesives – Qualitative assessment of durability of bonded assemblies – Wedge rupture test (ISO 10354:1992 modified) |
| EN 14444:2005/AC:2008 | Structural adhesives – Qualitative assessment of durability of bonded assemblies – Wedge rupture test (ISO 10354:1992 modified) |
| EN 14510:2005 | Adhesives for leather and footwear materials – Solvent-based and dispersion adhesives – Determination of sole positioning tack (spotting tack) |
| EN ISO 14678:2005 | Adhesives – Determination of resistance to flow (sagging) (ISO 14678:2005) |
| EN 14680:2015 | Adhesives for non-pressure thermoplastics piping systems – Specifications |
| EN 14713:2016 | Adhesives for paper and board, packaging and disposable sanitary products – Determination of friction properties of films potentially suitable for bonding |
| EN 14814:2016 | Adhesives for thermoplastic piping systems for fluids under pressure – Specifications |
| EN 14869-1:2011 | Structural adhesives – Determination of shear behaviour of structural bonds – Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| EN 14869-2:2011 | Structural adhesives – Determination of shear behaviour of structural bonds – Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| CEN/TS 14999:2013 | Adhesives for thermoplastic piping systems – Accelerated ageing test in storage container |
| EN 15062:2006 | Adhesives for leather and footwear materials – Solvent-based and dispersion adhesives – Testing ageing of bonds under specified conditions |
| EN 15190:2007 | Structural adhesives – Test methods for assessing long term durability of bonded metallic structures |
| EN 15274:2015 | General purpose adhesives for structural assembly – Requirements and test methods |
| EN 15275:2015 | Structural adhesives – Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| EN 15307:2014 | Adhesives for leather and footwear materials – Sole-upper bonds – Minimum strength requirements |
| EN 15336:2007 | Adhesives – Determination of the time to rupture of bonded joints under static load ( ISO 15109:1998 modified) |
| EN 15337:2007 | Adhesives – Determination of shear strength of anaerobic adhesives using pin-and-collar specimens (ISO 10123:1990 modified) |
| EN 15416-1:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic – Test methods – Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house |
| EN 15416-2:2007 | Adhesives for load bearing timber structures other than phenolic and aminoplastic – Test methods – Part 2: Static load test of multiple bondline specimens in compression shear |
| EN 15416-3:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic – Test methods – Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic – Test methods – Part 4: Determination of open assembly time for one component polyurethane adhesives |
| EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic – Test methods – Part 5: Determination of conventional pressing time |
| EN 15425:2017 | Adhesives – One component polyurethane for load bearing timber structures – Classification and performance requirements |
| EN ISO 15605:2004 | Adhesives – Sampling (ISO 15605:2000) |
| EN 15865:2009 | Adhesives – Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified) |
| EN 15870:2009 | Adhesives – Determination of tensile strength of butt joints (ISO 6922:1987 modified) |
| EN ISO 15908:2002 | Adhesives for thermoplastic piping systems – Test method for the determination of thermal stability of adhesives (ISO 15908:2002) |
| CEN/TR 15990:2010 | Data Sheets – Footwear Tests Materials and Test Adhesives |
| CEN/TR 15990:2010/AC:2010 | Data Sheets – Footwear Tests Materials and Test Adhesives |
| EN 16254:2013+A1:2016 | Adhesives – Emulsion polymerized isocyanate (EPI) for load-bearing timber structures – Classification and performance requirements |
| EN 16556:2014 | Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
| EN 28510-1:2014 | Adhesives – Peel test for a flexible-bonded-to-rigid test specimen assembly – Part 1: 90º peel |
