We offer a variety of high-quality coating services to meet your metal finishing needs. Below, you will find explanations of each service we offer.
- Organic Solvent Base Painting
- Water Based Painting
- Vitreous Enamelling
- Organic Solvent Base Painting: Organic solvent base painting is a process in which a paint or coating is applied to the surface of a workpiece using an organic solvent as the carrier. This process is often used to provide a durable, protective finish on the surface of the workpiece.
- Water Based Painting: Water based painting is a process in which a paint or coating is applied to the surface of a workpiece using water as the carrier. This process is often used to provide a durable, protective finish on the surface of the workpiece, and is considered to be more environmentally friendly than organic solvent base painting.
- Vitreous Enamelling: Vitreous enameling is a process in which a layer of glass is applied to the surface of a workpiece to create a decorative and protective finish. This process is often used to improve the appearance and durability of the workpiece.
We hope this information has been helpful in understanding the coating services we offer at Modulus Metal Company. Thank you for considering us for your metal finishing needs.Regenerate response
USEFUL INFO
Paints and Varnishes EN ISO Standards
EN ISO 150:2007 Raw, refined and boiled linseed oil for paints and varnishes – Specifications and methods of test (ISO 150:2006)
EN ISO 276:2010 Binders for paints and varnishes – Linseed stand oil – Requirements and methods of test (ISO 276:2002)
EN ISO 277:2010 Binders for paints and varnishes – Raw tung oil – Requirements and methods of test (ISO 277:2002)
EN 927-1:2013 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 1: Classification and selection
EN 927-2:2014 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 2: Performance specification
EN 927-3:2012 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 3: Natural weathering test
EN 927-5:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 5: Assessment of the liquid water permeability
EN 927-6:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
EN 1062-1:2004 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 1: Classification
EN 1062-3:2008 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 3: Determination of liquid water permeability
EN 1062-6:2002 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 6: Determination of carbon dioxide permeability
EN 1062-7:2004 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 7: Determination of crack bridging properties
EN 1062-11:2002 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 11: Methods of conditioning before testing
EN 1062-11:2002/AC:2005 Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 11: Methods of conditioning before testing
EN ISO 1513:2010 Paints and varnishes – Examination and preparation of test samples (ISO 1513:2010)
EN ISO 1514:2016 Paints and varnishes – Standard panels for testing (ISO 1514:2016)
EN ISO 1518-1:2011 Paints and varnishes – Determination of scratch resistance – Part 1: Constant-loading method (ISO 1518-1:2011)
EN ISO 1518-2:2011 Paints and varnishes – Determination of scratch resistance – Part 2: Variable-loading method (ISO 1518-2:2011)
EN ISO 1519:2011 Paints and varnishes – Bend test (cylindrical mandrel) (ISO 1519:2011)
EN ISO 1520:2006 Paints and varnishes – Cupping test (ISO 1520:2006)
EN ISO 1522:2006 Paints and varnishes – Pendulum damping test (ISO 1522:2006)
EN ISO 1524:2013 Paints, varnishes and printing inks – Determination of fineness of grind (ISO 1524:2013)
EN ISO 2409:2013 Paints and varnishes – Cross-cut test (ISO 2409:2013)
EN ISO 2431:2011 Paints and varnishes – Determination of flow time by use of flow cups (ISO 2431:2011)
EN ISO 2808:2007 Paints and varnishes – Determination of film thickness (ISO 2808:2007)
EN ISO 2810:2004 Paints and varnishes – Natural weathering of coatings – Exposure and assessment (ISO 2810:2004)
EN ISO 2811-1:2016 Paints and varnishes – Determination of density – Part 1: Pyknometer method (ISO 2811-1:2016)
EN ISO 2811-2:2011 Paints and varnishes – Determination of density – Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
EN ISO 2811-3:2011 Paints and varnishes – Determination of density – Part 3: Oscillation method (ISO 2811-3:2011)
EN ISO 2811-4:2011 Paints and varnishes – Determination of density – Part 4: Pressure cup method (ISO 2811-4:2011)
EN ISO 2812-1:2007 Paints and varnishes – Determination of resistance to liquids – Part 1: Immersion in liquids other than water (ISO 2812-1:2007)
EN ISO 2812-2:2007 Paints and varnishes – Determination of resistance to liquids – Part 2: Water immersion method (ISO 2812-2:2007)
EN ISO 2812-3:2012 Paints and varnishes – Determination of resistance to liquids – Part 3: Method using an absorbent medium (ISO 2812-3:2012)
EN ISO 2812-4:2007 Paints and varnishes – Determination of resistance to liquids – Part 4: Spotting methods (ISO 2812-4:2007)
EN ISO 2812-5:2007 Paints and varnishes – Determination of resistance to liquids – Part 5: Temperature-gradient oven method (ISO 2812-5:2007)
EN ISO 2813:2014 Paints and varnishes – Determination of specular gloss of non-metallic paint films at 20°, 60° and 85° (ISO 2813:1994, including Technical Corrigendum 1:1997)
EN ISO 2815:2003 Paints and varnishes – Buchholz indentation test (ISO 2815:2003)
EN ISO 2884-1:2006 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999)
EN ISO 2884-2:2006 Paints and varnishes – Determination of viscosity using rotary viscometers – Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003)
EN ISO 3219:1994 Plastics – Polymers/resins in the liquid state or as emulsions or dispersions – Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993)
EN ISO 3231:1997 Paints and varnishes – Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993)
EN ISO 3233-1:2013 Paints and varnishes – Determination of the percentage volume of non-volatile matter – Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013)
EN ISO 3233-2:2014 Paints and varnishes – Determination of the percentage volume of non-volatile matter – Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Arc
EN ISO 3233-3:2015 Paints and varnishes – Determination of the percentage volume of non-volatile matter – Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of
EN ISO 3248:2016 Paints and varnishes – Determination of the effect of heat (ISO 3248:2016)
EN ISO 3251:2008 Paints, varnishes and plastics – Determination of non-volatile-matter content (ISO 3251:2008)
EN ISO 3668:2001 Paints and varnishes – Visual comparison of the colour of paints (ISO 3668:1998)
EN ISO 3681:1998 Binders for paints and varnishes – Determination of saponification value – Titrimetric method (ISO 3681:1996)
EN ISO 4618:2014 Paints and varnishes – Terms and definitions (ISO 4618:2014)
EN ISO 4619:2010 Driers for paints and varnishes (ISO 4619:1998) EN ISO 4623-1:2002 Paints and varnishes – Determination of resistance to filiform corrosion – Part 1: Steel substrates (ISO 4623-1:2000)
EN ISO 4623-2:2016 Paints and varnishes – Determination of resistance to filiform corrosion – Part 2: Aluminium substrates (ISO 4623-2:2016)
EN ISO 4624:2016 Paints and varnishes – Pull-off test for adhesion (ISO 4624:2016)
EN ISO 4625-1:2006 Binders for paints and varnishes – Determination of softening point – Part 1: Ring-and-ball method (ISO 4625-1:2004)
EN ISO 4625-2:2006 Binders for paints and varnishes – Determination of softening point – Part 2: Cup-and-ball method (ISO 4625-2:2004)
EN ISO 4628-1:2016 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 1: General introduction and designation system (ISO 4628-1:2016)
EN ISO 4628-2:2016 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
EN ISO 4628-3:2016 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
EN ISO 4628-4:2016 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
EN ISO 4628-5:2016 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 5: Assessment of degree of flaking (ISO 4628-5:2016)
EN ISO 4628-6:2011 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011)
EN ISO 4628-7:2016 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016)
EN ISO 4628-8:2012 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial
EN ISO 4628-10:2016 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2016)
EN ISO 4629-1:2016 Binders for paints and varnishes – Determination of hydroxyl value – Part 1: Titrimetric method without using a catalyst (ISO 4629-1:2016)
EN ISO 4629-2:2016 Binders for paints and varnishes – Determination of hydroxyl value – Part 2: Titrimetric method using a catalyst (ISO 4629-2:2016)
EN ISO 4630:2015 Clear liquids – Estimation of colour by the Gardner colour scale (ISO 4630:2015)
EN ISO 6270-1:2001 Paints and varnishes – Determination of resistance to humidity – Part 1: Continuous condensation (ISO 6270-1:1998)
EN ISO 6270-2:2005 Paints and varnishes – Determination of resistance to humidity – Part 2: Procedure for exposing test specimens in condensation-water atmospheres (ISO 6270-2:2005)
EN ISO 6271:2015 Clear liquids – Estimation of colour by the platinum-cobalt colour scale (ISO 6271:2015) EN ISO 6272-1:2011 Paints and varnishes – Rapid-deformation (impact resistance) tests – Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
EN ISO 6272-2:2011 Paints and varnishes – Rapid-deformation (impact resistance) tests – Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
EN ISO 6504-1:2006 Paints and varnishes – Determination of hiding power – Part 1: Kubelka-Munk method for white and light-coloured paints (ISO 6504-1:1983)
EN ISO 6504-3:2007 Paints and varnishes – Determination of hiding power – Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006)
EN ISO 6744-1:2004 Binders for paints and varnishes – Alkyd resins – Part 1: General methods of test (ISO 6744-1:1999)
EN ISO 6744-2:2004 Binders for paints and varnishes – Alkyd resins – Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999)
EN ISO 6744-3:2004 Binders for paints and varnishes – Alkyd resins – Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999)
EN ISO 6744-4:2004 Binders for paints and varnishes – Alkyd resins – Part 4: Determination of fatty acid content (ISO 6744-4:1999)
EN ISO 6860:2006 Paints and varnishes – Bend test (conical mandrel) (ISO 6860:2006)
EN ISO 7142:2007 Binders for paints and varnishes – Epoxy resins – General methods of test (ISO 7142:2007)
EN ISO 7143:2007 Binders for paints and varnishes – Methods of test for characterizing water-based binders (ISO 7143:2007)
EN ISO 7783:2011 Paints and varnishes – Determination of water-vapour transmission properties – Cup method (ISO 7783:2011)
EN ISO 7784-1:2016 Paints and varnishes – Determination of resistance to abrasion – Part 1: Rotating abrasive-paper-covered wheel method (ISO 7784-1:2016)
EN ISO 7784-2:2016 Paints and varnishes – Determination of resistance to abrasion – Part 2: Rotating abrasive rubber wheel method (ISO 7784-2:2016)
EN ISO 7784-3:2016 Paints and varnishes – Determination of resistance to abrasion – Part 3: Reciprocating test panel method (ISO 7784-3:2016)
EN ISO 8130-1:2010 Coating powders – Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992)
EN ISO 8130-2:2010 Coating powders – Part 2: Determination of density by gas comparison pyknometer (referee method) (ISO 8130-2:1992)
EN ISO 8130-3:2010 Coating powders – Part 3: Determination of density by liquid displacement pyknometer (ISO 8130-3:1992)
EN ISO 8130-4:2010 Coating powders – Part 4: Calculation of lower explosion limit (ISO 8130-4:1992, including Cor 1:1993)
EN ISO 8130-5:2010 Coating powders – Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992)
EN ISO 8130-6:2010 Coating Powders – Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:1992, including Amd 1:1998)
EN ISO 8130-7:2010 Coating powders – Part 7: Determination of loss of mass on stoving (ISO 8130-7:1992) EN ISO 8130-8:2010 Coating powders – Part 8: Assessment of the storage stability of thermosetting powders (ISO 8130-8:1994)
EN ISO 8130-9:1999 Coating powders – Part 9: Sampling (ISO 8130-9:1992)
EN ISO 8130-10:2010 Coating powders – Part 10: Determination of deposition efficiency (ISO 8130-10:1998)
EN ISO 8130-11:2010 Coating powders – Part 11: Inclined-plane flow test (ISO 8130-11:1997)
EN ISO 8130-12:2010 Coating powders – Part 12: Determination of compatibility (ISO 8130-12:1998)
EN ISO 8130-13:2010 Coating powders – Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001) EN ISO 8130-14:2004 Coating powders – Part 14: Terminology (ISO 8130-14:2004)
EN ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness – Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous
EN ISO 8501-2:2001 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness – Part 2: preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994)
EN ISO 8501-3:2007 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness – Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2006)
EN ISO 8501-4:2006 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness – Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
ISO EN ISO 8502-2:2017 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:2017)
EN ISO 8502-3:2017 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017)
EN ISO 8502-4:2017 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017)
EN ISO 8502-5:2004 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998)
EN ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 6: Extraction of soluble contaminants for analysis – The Bresle method (ISO 8502-6:2006)
EN ISO 8502-9:2000 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998)
EN ISO 8502-11:2006 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006)
EN ISO 8502-12:2004 Preparation of steel substrates before application of paints and related products – Tests for the assessment of surface cleanliness – Part 12: Field method for the titrimetric determination of water-soluble ferrous ions (ISO 8502-12:2003)
EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products – Surface roughness characteristics of blast-cleaned steel substrates – Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abra
EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products – Surface roughness characteristics of blast-cleaned steel substrates – Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel – Comparator proceed
EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products – Surface roughness characteristics of blast-cleaned steel substrates – Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products – Surface roughness characteristics of blast-cleaned steel substrates – Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
EN ISO 8503-5:2017 Preparation of steel substrates before application of paints and related products – Surface roughness characteristics of blast-cleaned steel substrates – Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2003)
EN ISO 8504-1:2001 Preparation of steel substrates before application of paints and related products – Surface preparation methods – Part 1: General principles (ISO 8504-1:2000)
EN ISO 8504-2:2001 Preparation of steel substrates before application of paints and related products – Surface preparation methods – Part 2: Abrasive blast-cleaning (ISO 8504-2:2000)
EN ISO 8504-3:2001 Preparation of steel substrates before application of paints and related products – Surface preparation methods – Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993)
EN ISO 8623:2015 Tall-oil fatty acids for paints and varnishes – Specifications and test methods (ISO 8623:2015)
EN ISO 9038:2013 Determination of sustained combustibility of liquids (ISO 9038:2013)
EN ISO 9117-1:2009 Paints and varnishes – Drying tests – Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
EN ISO 9117-2:2010 Paints and varnishes – Drying tests – Part 2: Pressure test for stackability (ISO 9117-2:2010)
EN ISO 9117-3:2010 Paints and varnishes – Drying tests – Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) EN ISO 9117-4:2012 Paints and varnishes – Drying tests – Part 4: Test using a mechanical recorder (ISO 9117-4:2012)
EN ISO 9117-5:2012 Paints and varnishes – Drying tests – Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)
EN ISO 9117-6:2012 Paints and varnishes – Drying tests – Part 6: Print-free test (ISO 9117-6:2012)
EN ISO 9227:2012 Corrosion tests in artificial atmospheres – Salt spray tests (ISO 9227:2012)
EN ISO 9514:2005 Paints and varnishes – Determination of the pot life of multicomponent coating systems – Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005)
EN ISO 10283:2007 Binders for paints and varnishes – Determination of monomeric diisocyanates in isocyanate resins (ISO 10283:2007)
EN ISO 10890:2010 Paints and varnishes – Modelling of biocide release rate from antifouling paints by mass-balance calculation (ISO 10890:2010)
EN ISO 10927:2011 Plastics – Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
EN ISO 11124-1:1997 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives – Part 1: General introduction and classification (ISO 11124-1:1993)
EN ISO 11124-2:1997 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives – Part 2: Chilled-iron grit (ISO 11124-2:1993)
EN ISO 11124-3:1997 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives – Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993)
EN ISO 11124-4:1997 Preparation of steel substrates before application of paints and related products – Specifications for metallic blast-cleaning abrasives – Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993)
EN ISO 11125-1:1997 Preparation of steel substrates before application of paints and related products – Test methods for metallic blast-cleaning abrasives – Part 1: Sampling (ISO 11125-1:1993)
EN ISO 11125-2:1997 Preparation of steel substrates before application of paints and related products – Test methods for metallic blast-cleaning abrasives – Part 2: Determination of particle size distribution (ISO 11125-2:1993)
EN ISO 11125-3:1997 Preparation of steel substrates before application of paints and related products – Test methods for metallic blast-cleaning abrasives – Part 3: Determination of hardness (ISO 11125-3:1993)
EN ISO 11125-4:1997 Preparation of steel substrates before application of paints and related products – Test methods for metallic blast-cleaning abrasives – Part 4: Determination of apparent density (ISO 11125-4:1993)
EN ISO 11125-5:1997 Preparation of steel substrates before application of paints and related products – Test methods for metallic blast-cleaning abrasives – Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993)
EN ISO 11125-6:1997 Preparation of steel substrates before application of paints and related products – Test methods for metallic blast-cleaning abrasives – Part 6: Determination of foreign matter (ISO 11125-6:1993)
EN ISO 11125-7:1997 Preparation of steel substrates before application of paints and related products – Test methods for metallic blast-cleaning abrasives – Part 7: Determination of moisture (ISO 11125-7:1993)
EN ISO 11126-1:1997 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2:1
EN ISO 11126-3:1997 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 3: Copper refinery slag (ISO 11126-3:1993)
EN ISO 11126-4:1998 Preparation of steel substrates before application of paintsand related products – Specifications for non-metallic blast-cleaning abrasives – Part 4: Coal furnace slag (ISO 11126-4:1993)
EN ISO 11126-5:1998 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 5: Nickel refinery slag (ISO 11126-5:1993)
EN ISO 11126-6:1997 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 6: Iron furnace slag (ISO 11126-6:1993)
EN ISO 11126-7:1999 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 7: Fused aluminium oxide (ISO 11126-7:1995)
EN ISO 11126-8:1997 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 8: Olivine sand (ISO 11126-8:1993)
EN ISO 11126-9:2004 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 9: Staurolite (ISO 11126-9:1999)
EN ISO 11126-10:2004 Preparation of steel substrates before application of paints and related products – Specifications for non-metallic blast-cleaning abrasives – Part 10: Almandite garnet (ISO 11126-10:2000)
EN ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 1: Sampling (ISO 11127-1:2011)
EN ISO 11127-2:2011 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 2: Determination of particle size distribution (ISO 11127-2:2011)
EN ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 3: Determination of apparent density (ISO 11127-3:2011)
EN ISO 11127-4:2011 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:2011)
EN ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 5: Determination of moisture (ISO 11127-5:2011)
EN ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011)
EN ISO 11127-7:2011 Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 7: Determination of water-soluble chlorides (ISO 11127-7:2011)
EN ISO 11664-1:2011 Colorimetry – Part 1: CIE standard colorimetric observers (ISO 11664-1:2007)
EN ISO 11664-2:2011 Colorimetry – Part 2: CIE standard illuminants (ISO 11664-2:2007)
EN ISO 11664-3:2013 Colorimetry – Part 3: CIE tristimulus values (ISO 11664-3:2012)
EN ISO 11664-4:2011 Colorimetry – Part 4: CIE 1976 L*a*b* Colour space (ISO 11664-4:2008)
EN ISO 11664-5:2016 Colorimetry – Part 5: CIE 1976 L*u*v* Colour space and u’, v’ uniform chromaticity scale diagram (ISO/CIE 11664-5:2016)
EN ISO 11664-6:2016 Colorimetry – Part 6: CIEDE2000 Colour-difference formula (ISO/CIE 11664-6:2014)
EN ISO 11668:2001 Binders for paints and varnishes – Chlorinated polymerization resins – General methods of test (ISO 11668:1997)
EN ISO 11890-1:2007 Paints and varnishes – Determination of volatile organic compound (VOC) content – Part 1: Difference method (ISO 11890-1:2007)
EN ISO 11890-2:2013 Paints and varnishes – Determination of volatile organic compound (VOC) content – Part 2: Gas-chromatographic method (ISO 11890-2:2013)
EN ISO 11908:1998 Binders for paints and varnishes – Amino resins – General methods of test (ISO 11908:1996)
EN ISO 11909:2007 Binders for paints and varnishes – Polyisocyanate resins – General methods of test (ISO 11909:2007)
EN ISO 11997-1:2006 Paints and varnishes – Determination of resistance to cyclic corrosion conditions – Part 1: Wet (salt fog)/dry/humidity (ISO 11997-1:2005)
EN ISO 11997-2:2013 Paints and varnishes – Determination of resistance to cyclic corrosion conditions – Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)
EN ISO 11998:2006 Paints and varnishes – Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006)
EN ISO 12137:2011 Paints and varnishes – Determination of mar resistance (ISO 12137:2011)
EN 12206-1:2004 Paints and varnishes – Coating of aluminium and aluminium alloys for architectural purposes – Part 1: Coatings prepared from coating powder
EN ISO 12944-1:1998 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 1: General introduction (ISO 12944-1:1998)
EN ISO 12944-2:1998 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 2: Classification of environments (ISO 12944-2:1998)
EN ISO 12944-3:1998 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 3: Design considerations (ISO 12944-3:1998)
EN ISO 12944-4:1998 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 4: Types of surface and surface preparation (ISO 12944-4:1998)
EN ISO 12944-5:2007 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 5: Protective paint systems (ISO 12944-5:2007)
EN ISO 12944-6:1998 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 6: Laboratory performance test methods (ISO 12944-6:1998)
EN ISO 12944-7:1998 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 7: Execution and supervision of paint work (ISO 12944-7:1998)
EN ISO 12944-8:1998 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 8: Development of specifications for new work and maintenance (ISO 12944-8:1998)
EN ISO 13076:2012 Paints and varnishes – Lighting and procedure for visual assessments of coatings (ISO 13076:2012)
EN ISO 13129:2012 Paints and varnishes – Electrochemical measurement of the protection provided to steel by paint coatings – Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements (ISO 13129:2012)
EN 13300:2001 Paints and varnishes – Water-borne coating materials and coating systems for interior walls and ceilings – Classification
EN 13300:2001/AC:2002 Paints and varnishes – Water-borne coating materials and coating systems for interior walls and ceilings – Classification
EN 13438:2013 Paints and varnishes – Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
EN 13523-0:2014 Coil coated metals – Test methods – Part 0: General introduction
EN 13523-1:2017 Coil coated metals – Test methods – Part 1: Film thickness
EN 13523-2:2014 Coil coated metals – Test methods – Part 2: Gloss
EN 13523-3:2014 Coil coated metals – Test methods – Part 3: Colour difference – Instrumental comparison
EN 13523-4:2014 Coil coated metals – Test methods – Part 4: Pencil hardness
EN 13523-5:2014 Coil coated metals – Test methods – Part 5: Resistance to rapid deformation (impact test)
EN 13523-6:2002 Coil coated metals – Test methods – Part 6: Adhesion after indentation (cupping test)
EN 13523-7:2014 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-8:2010 Coil coated metals – Test methods – Part 8: Resistance to salt spray (fog)
EN 13523-9:2014 Coil coated metals – Test methods – Part 9: Resistance to water immersion
EN 13523-10:2017 Coil coated metals – Test methods – Part 10: Resistance to fluorescent UV radiation and water condensation
EN 13523-11:2011 Coil coated metals – Test methods – Part 11: Resistance to solvents (rubbing test)
EN 13523-12:2017 Coil coated metals – Test methods – Part 12: Resistance to scratching
EN 13523-13:2014 Coil coated metals – Test methods – Part 13: Resistance to accelerated ageing by the use of heat
EN 13523-14:2014 Coil coated metals – Test methods – Part 14: Chalking (Helmen method)
EN 13523-15:2015 Coil coated metals – Test methods – Part 15: Metamerism
EN 13523-16:2004 Coil coated metals – Test methods – Part 16: Resistance to abrasion
EN 13523-17:2011 Coil coated metals – Test methods – Part 17: Adhesion of strippable films
EN 13523-18:2002 Coil coated metals – Test methods – Part 18: Resistance to staining
EN 13523-19:2011 Coil coated metals – Test methods – Part 19: Panel design and method of atmospheric exposure testing
EN 13523-20:2011 Coil coated metals – Test methods – Part 20: Foam adhesion
EN 13523-21:2010 Coil coated metals – Test methods – Part 21: Evaluation of outdoor exposed panels
EN 13523-22:2017 Coil coated metals – Test methods – Part 22: Colour difference – Visual comparison
EN 13523-23:2015 Coil coated metals – Test methods – Part 23: Colour stability in humid atmospheres containing sulfur dioxide
EN 13523-24:2004 Coil coated metals – Test methods – Part 24: Resistance to blocking and pressure marking
EN 13523-25:2014 Coil coated metals – Test methods – Part 25: Resistance to humidity
EN 13523-26:2014 Coil coated metals – Test methods – Part 26: Resistance to condensation of water
EN 13523-27:2009 Coil coated metals – Test methods – Part 27: Resistance to humid poultice (Cataplasm test)
EN 13523-29:2017 Coil coated metals – Test methods – Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
EN ISO 13632:2012 Binders for paints and varnishes – Rosin – Sampling and sample preparation for colour measurement (ISO 13632:2012)
EN ISO 13803:2014 Paints and varnishes – Determination of reflection haze on paint films at 20 degrees (ISO 13803:2014)
EN ISO 14446:2010 Binders for paints and varnishes – Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999)
EN ISO 14680-1:2006 Paints and varnishes – Determination of pigment content – Part 1: Centrifuge method (ISO 14680-1:2000)
EN ISO 14680-2:2006 Paints and varnishes – Determination of pigment content – Part 2: Ashing method (ISO 14680-2:2000)
EN ISO 14680-3:2006 Paints and varnishes – Determination of pigment content – Part 3: Filtration method (ISO 14680-3:2000)
EN 15060:2006 Paints and varnishes – Guide for the classification and selection of coating systems for wood based materials in furniture for interior use
EN ISO 15091:2012 Paints and varnishes – Determination of electrical conductivity and resistance (ISO 15091:2012)
EN ISO 15110:2013 Paints and varnishes – Artificial weathering including acidic deposition (ISO 15110:2013)
EN ISO 15181-2:2007 Paints and varnishes – Determination of release rate of biocides from antifouling paints – Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate (ISO 15181-2:2007)
EN ISO 15181-3:2007 Paints and varnishes – Determination of release rate of biocides from antifouling paints – Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract (ISO 151
EN ISO 15181-4:2008 Paints and varnishes – Determination of release rate of biocides from antifouling paints – Part 4: Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate (ISO 15181-4:2008)
EN ISO 15181-5:2008 Paints and varnishes – Determination of release rate of biocides from antifouling paints – Part 5: Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulf
EN ISO 15181-6:2014 Paints and varnishes – Determination of release rate of biocides from antifouling paints – Part 6: Determination of tralopyril release rate by quantitation of its degradation product in the extract (ISO 15181-6:2012)
EN ISO 15184:2012 Paints and varnishes – Determination of film hardness by pencil test (ISO 15184:2012)
EN ISO 15234:2010 Paints and varnishes – Testing of formaldehyde-emitting coatings and melamine foams – Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999)
EN 15457:2014 Paints and varnishes – Laboratory method for testing the efficacy of film preservatives in a coating against fungi
EN 15458:2014 Paints and varnishes – Laboratory method for testing the efficacy of film preservatives in a coating against algae
EN ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes – Sampling (ISO 15528:2013)
EN ISO 15710:2006 Paints and varnishes – Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002)
EN ISO 15711:2004 Paints and varnishes – Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003)
EN ISO 15715:2006 Binders for paints and varnishes – Determination of turbidity (ISO 15715:2003)
EN 15773:2009 Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] – Specifications, recommendations and guidelines
EN ISO 15880:2004 Paints, varnishes and binders – Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000)
EN ISO 16014-5:2012 Plastics – Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography – Part 5: Method using light-scattering detection (ISO 16014-5:2012)
EN 16074:2011 Paints and varnishes – Determination of non-volatile-matter content and spreading rate of coil coating materials
EN 16105:2011 Paints and varnishes – Laboratory method for determination of release of substances from coatings in intermittent contact with water
EN ISO 16276-1:2007 Corrosion protection of steel structures by protective paint systems – Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating – Part 1: Pull-off testing (ISO 16276-1:2007)
EN ISO 16276-2:2007 Corrosion protection of steel structures by protective paint systems – Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating – Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007)
CEN/TS 16358:2012 Paints and varnishes – Coating materials and coating systems for exterior wood – Assessment of air inclusions/microfoam in coating films
CEN/TS 16359:2012 Paints and varnishes – Coating materials and coating systems for exterior wood – Assessment of knot staining resistance of wood coatings
CEN/TS 16360:2012 Paints and varnishes – Coating materials and coating systems for exterior wood – Assessment of film extensibility by indentation of a coating on a wooden substrate EN 16402:2013 Paints and varnishes – Assessment of emissions of substances from coatings into indoor air – Sampling, conditioning and testing
EN ISO 16474-1:2013 Paints and varnishes – Methods of exposure to laboratory light sources – Part 1: General guidance (ISO 16474-1:2013)
EN ISO 16474-2:2013 Paints and varnishes – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps (ISO 16474-2:2013)
EN ISO 16474-3:2013 Paints and varnishes – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps (ISO 16474-3:2013)
EN ISO 16482-1:2016 Binders for paints and varnishes – Determination of the non-volatile-matter content of aqueous rosin-resin dispersions – Part 1: Oven method (ISO 16482-1:2013)
EN ISO 16482-2:2016 Binders for paints and varnishes – Determination of the non-volatile-matter content of aqueous rosin-resin dispersions – Part 2: Microwave method (ISO 16482-2:2013)
EN 16492:2014 Paints and varnishes – Evaluation of the surface disfigurement caused by fungi and algae on coatings
CEN/TS 16498:2013 Paints and varnishes – Coating materials and coating systems for exterior wood – Assessment of tannin staining
CEN/TS 16499:2013 Paints and varnishes – Coating materials and coating systems for exterior wood – Resistance to blocking of paints and varnishes on wood
EN 16566:2014 Paints and varnishes – Fillers for internal and/or external works – Adaptation of fillers to European standards
EN 16623: 2015 Paints and varnishes – Reactive coatings for fire protection of metallic substrates – Definitions, requirements, characteristics and marking
CEN/TS 16700:2014 Paints and varnishes – Coating materials and coating systems for exterior wood – Assessment of resistance to impact of a coating on a wooden substrate
EN ISO 16773-1:2016 Paints and varnishes – Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens – Part 1: Terms and definitions (ISO 16773-1:2016)
EN ISO 16773-2:2016 Paints and varnishes – Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens – Part 2: Collection of data (ISO 16773-2:2016)
EN ISO 16773-3:2016 Paints and varnishes – Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens – Part 3: Processing and analysis of data from dummy cells (ISO 16773-3:2016)
EN ISO 16773-4:2009 Paints and varnishes – Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens – Part 4: Examples of spectra of polymer-coated specimens (ISO 16773-4:2009)
EN ISO 16862:2006 Paints and varnishes – Evaluation of sag resistance (ISO 16862:2003)
EN ISO 16925:2014 Paints and varnishes – Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014)
EN ISO 16927:2014 Paints and varnishes – Determination of the overcoatability and recoatability of a coating (ISO 16927:2014)
CEN/TS 16969:2016 Paints and varnishes – Coating materials and coating systems for exterior wood – Assessment of end grain sealing performance
EN ISO 17132:2007 Paints and varnishes – T-bend test (ISO 17132:2007)
EN ISO 17463:2014 Paints and varnishes – Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014)
EN ISO 17872:2007 Paints and varnishes – Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007)
EN ISO 17895:2005 Paints and varnishes – Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005)
EN ISO 19334:2011 Binders for paints and varnishes – Gum rosin – Gas-chromatographic analysis (ISO 19334:2010)
EN ISO 20566:2013 Paints and varnishes – Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013)
EN ISO 20567-1:2017 Paints and varnishes – Determination of stone-chip resistance of coatings – Part 1: Multi-impact testing (ISO 20567-1:2017)
EN ISO 20567-2:2017 Paints and varnishes – Determination of stone-chip resistance of coatings – Part 2: Single-impact test with a guided impact body (ISO 20567-2:2017)
EN ISO 20567-3:2012 Paints and varnishes – Determination of stone-chip resistance of coatings – Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012)
EN ISO 21227-1:2003 Paints and varnishes – Evaluation of defects on coated surfaces using optical imaging – Part 1: General guidance (ISO 21227-1:2003)
EN ISO 21227-2:2006 Paints and varnishes – Evaluation of defects on coated surfaces using optical imaging – Part 2: Evaluation procedure for multi-impact stone-chipping test (ISO 21227-2:2006)
EN ISO 21227-3:2007 Paints and varnishes – Evaluation of defects on coated surfaces using optical imaging – Part 3: Evaluation of delamination and corrosion around a scribe (ISO 21227-3:2007)
EN ISO 21227-4:2008 Paints and varnishes – Evaluation of defects on coated surfaces using optical imaging – Part 4: Evaluation of filiform corrosion (ISO 21227-4:2008)
EN 23270:1991 Paints and varnishes and their raw materials – Temperatures and humidities for conditioning and testing (ISO 3270:1984)
EN ISO 28199-1:2009 Paints and varnishes – Evaluation of properties of coating systems related to the application process – Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009)
EN ISO 28199-1:2009/AC:2009 Paints and varnishes – Evaluation of properties of coating systems related to the application process – Part 1: Relevant vocabulary and preparation of test panels – Technical Corrigendum 1 (ISO 28199-1:2009/Cor 1:2009)
EN ISO 23811:2009 Paints and varnishes – Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)
EN ISO 28199-2:2009 Paints and varnishes – Evaluation of properties of coating systems related to the application process – Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2009)
EN ISO 28199-3:2009 Paints and varnishes – Evaluation of properties of coating systems related to the application process – Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power (ISO 28199-3:2009)
EN ISO 29601:2011 Paints and varnishes – Corrosion protection by protective paint systems – Assessment of porosity in a dry film (ISO 29601:2011)