Modulus Metal provides mechanical testing services by using state and university laboratories that we have an agreement with. We are able to provide a variety of destructive testing methods
Types of Services:
Hardness Testing Services
Residual Stress Measurement
Charpy Impact Test Services
Stress Rupture and Creep Testing
Shear Testing
Fatigue Testing
Tensile Testing Services
Related Standards:
ISO TC 164:
ISO 23718: 2007 Metallic materials — Mechanical testing — Vocabulary
ISO TR 25679: 2005 Mechanical testing of metals — Symbols and definitions in published standards
UNIAXIAL:
ISO 204: 2009 Metallic materials — Uniaxial creep testing in tension — Method of test
ISO 376: 2011 Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 6892-1: 2016 Metallic materials — Tensile testing — Part 1: Method of test at room temperature
ISO 6892-2: 2018 Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
ISO 6892-3:2015 Metallic materials — Tensile testing — Part 3: Method of test at low temperature
ISO 6892-4:2015 Metallic materials — Tensile testing — Part 4: Method of test in liquid helium
ISO 7500-1: 2018 Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
ISO 7500-2: 2006 Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied force
ISO 9513: 2012 Metallic materials — Calibration of extensometer systems used in uniaxial testing
ISO 9513 + COR 1: 2013 Metallic materials — Calibration of extensometer systems used in uniaxial testing
ISO 15579: 2000 Metallic materials — Tensile testing at low temperature
ISO 19819: 2004 Metallic materials — Tensile testing in liquid helium
ISO 26203-1: 2018 Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
ISO 26203-2: 2011 Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems
DUCTILITY:
ISO 7438: 2016 Metallic materials — Bend test
ISO 7799: 1985 Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test ISO 7800:2012 Metallic materials — Wire — Simple torsion test
ISO 7801: 1984 Metallic materials — Wire — Reverse bend test
ISO 7802: 2013 Metallic materials — Wire — Wrapping test
ISO 8491: 1998 Metallic materials — Tube (in full section) — Bend test
ISO 8492: 2013 Metallic materials — Tube — Flattening test
ISO 8493: 1998 Metallic materials — Tube — Drift-expanding test
ISO 8494: 2013 Metallic materials — Tube — Flanging test
ISO 8495: 2013 Metallic materials — Tube — Ring-expanding test
ISO 8496: 2013 Metallic materials — Tube — Ring tensile test
ISO 9649: 2016 Metallic materials — Wire — Reverse torsion test
ISO 10113: 2006 Metallic materials — Sheet and strip — Determination of plastic strain ratio
ISO 10275: 2007 Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent ,
ISO 11531: 2015 Metallic materials — Earing test
ISO 12004-1: 2008 Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 1: Measurement and application of forming-limit diagrams in the press shop
ISO 12004-2: 2008 Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 2: Determination of forming-limit curves in the laboratory
ISO 13314: 2011 Mechanical testing of metals — Ductility testing — Compression test for porous and cellular metals
ISO 15363: 2017 Metallic materials — Tube ring hydraulic pressure test
ISO 16630: 2017 Metallic materials — Sheet and strip — Hole expanding test
ISO 16808: 2014 Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
ISO 16842: 2014 Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece
ISO 17340: 2014 Metallic materials — Ductility testing — High speed compression test for porous and cellular metals
ISO 18338:2015 Metallic materials — Torsion test at ambient temperature
ISO 20032: 2013 Method for evaluation of tensile properties of metallic superplastic materials
ISO 20482: 2013 Metallic materials — Sheet and strip — Erichsen cupping test
ISO 24213: 2017 Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending
HARDNESS:
ISO 4545-1: 2017 Metallic materials — Knoop hardness test — Part 1: Test method
ISO 4545-2: 2017 Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
ISO 4545-3: 2017 Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
ISO 4545-4: 2017 Metallic materials — Knoop hardness test — Part 4: Table of hardness values
ISO 6506-1: 2014 Metallic materials — Brinell hardness test — Part 1: Test method
ISO 6506-2: 2017 Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
ISO 6506-3: 2014 Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
ISO 6506-4: 2014 Metallic materials — Brinell hardness test — Part 4: Table of hardness values
ISO 6507-1: 2018 Metallic materials — Vickers hardness test — Part 1: Test method
ISO 6507-2: 2018 Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
ISO 6507-3: 2018 Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
ISO 6507-4: 2018 Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
ISO 6508-1: 2016 Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6508-2: 2015 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6508-3: 2015 Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) ISO 14577-1: 2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
ISO 14577-2: 2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
ISO 14577-3: 2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO 14577-4: 2016 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
ISO 16859-1:2015 Metallic materials — Leeb hardness test — Part 1: Test method
ISO 16859-2:2015 Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices
ISO 16859-3:2015 Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks
ISO 18265: 2013 Metallic materials — Conversion of hardness values
ISO TR 29381: 2008 Metallic materials — Measurement of mechanical properties by an instrumented indentation test — Indentation tensile properties
TOUGHNESS:
ISO 148-1: 2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
ISO 148-2: 2016 Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
ISO 148-3: 2016 Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method
ISO 3785: 2006 Metallic materials — Designation of test specimen axes in relation to product texture
ISO 12106:2017 Metallic materials — Fatigue testing — Axial-strain-controlled method
ISO 12135: 2016 Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
ISO 14556: 2015 Steel — Charpy V-notch pendulum impact test — Instrumented test method
ISO 15653: 2018 Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
ISO 22889: 2013 Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint
ISO 26843:2015 Metallic materials — Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
ISO 27306: 2016 Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
FATIGUE:
ISO 1143: 2010 Metallic materials — Rotating bar bending fatigue testing
ISO 1352: 2011 Metallic materials — Torque-controlled fatigue testing
ISO 4965-1: 2012 Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 1: Testing systems
ISO 4965-2: 2012 Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic calibration device (DCD) instrumentation
ISO 12106: 2017 Metallic materials — Fatigue testing — Axial-strain-controlled method
ISO 12107: 2012 Metallic materials — Fatigue testing — Statistical planning and analysis of data
ISO 12108: 2012 Metallic materials — Fatigue testing — Fatigue crack growth method
ISO 12110-1: 2013 Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principles, test method and reporting requirements
ISO 12110-2: 2013 Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 2: Cycle counting and related data reduction methods
ISO 12111: 2011 Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method
ISO 23788: 2012 Metallic materials — Verification of the alignment of fatigue testing machines