Skip to content
Modulus Metal Company Logo_TURKEY

Modulus Metal

sourcing and quality

  • Home
  • About Us
  • Our Products
    • Casting
      • Sand Casting
      • Die Casting
      • Centrifugal Casting
      • Investment Casting
    • Deformation
      • Drawing
      • Extrusion
      • Forging/ Rolling
      • Sheet Metal
    • Molding
      • Blow Molding
      • Plastic Injection Molding
      • Polymer Casting
      • Polymer Extrusion
    • Machining
      • CNC Machining Process
      • Thermal Metal Cutting Service
      • Sheet / Film
      • Abrasive
      • Electrical and Chemical Machining
    • Joining
      • Thermal Welding
      • Mechanical Welding
      • Fasteners
        • Screw Fasten
        • Rivets and Staples
        • Snap and Press Fit
      • Adhesives
    • Heat Treatment
      • Annealing / Normalizing
      • Case Hardening with Subsequent Hardening Operation
      • Case Hardening without Subsequent Hardening Operation
      • Hardening and Tempering
      • Solution and Age Hardening
      • Stress Relieving
    • Surface Treatment
      • Surface Coating
        • Plating and Metal Coating
        • Cladding
        • Chemical Conversion Coating
        • Polymer Powder Coating
        • Thermal Spraying
      • Polishing / Texturing / Etching
      • Surface Heat Treatment
      • Painting
    • 3D Printing
    • Powder Metallurgy
  • Quality Controls
    • Resident Engineering Services
    • Process Control
    • PPAP Control and Part Approval Process
    • Final Inspection or Pre-Shipment Controls
    • 3rd Party Operations & Containment Management
    • 8D Management
    • Loading and Unloading Inspections
    • Statistical Quality & Optimization
  • Testing Services
    • Mechanical Testing Services
    • Chemical Analysis Services
    • Metallurgical Testing
    • Non Destructive Testing Methods (NDT Testing)
    • Surface Roughness Testing
    • Paint and Coating Adhesion Testing
  • Material Grades
    • Metals and Alloys
      • Ferrous
      • Non-Ferrous
    • Polymers
  • Contact Us

Surface Treatment

Plating Coating in Turkey
Surface Coating
Polishing/Texturing/Etching
Surface Heat Treatment
Painting

Useful Info

ISO Standards List for Corrosion of Metals and Alloys

Show the Standards
Standard NoStandard
ISO 3231:1993Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide
ISO 3651-3:2017Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels
ISO 6509: 1981Corrosion of metals and alloys — Determination of dezincification resistance of brass
ISO 6509-1: 2014Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method
ISO 6509-2:2017Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria
ISO 7384: 1986Corrosion tests in artificial atmosphere — General requirements
ISO 7441: 2015Corrosion of metals and alloys — Determination of bimetallic corrosion in outdoor exposure corrosion tests
ISO 7539-1: 2012Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
ISO 7539-2: 1989Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens
ISO 7539-3: 1989Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens
ISO 7539-4: 1989Corrosion of metals and alloys — Stress corrosion testing — Part 4: Preparation and use of uniaxially loaded tension specimens
ISO 7539-5: 1989Corrosion of metals and alloys — Stress corrosion testing — Part 5: Preparation and use of C-ring specimens
ISO 7539-6: 2011Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
ISO 7539-7: 2005Corrosion of metals and alloys — Stress corrosion testing — Part 7: Method for slow strain rate testing
ISO 7539-8: 2000Corrosion of metals and alloys — Stress corrosion testing — Part 8: Preparation and use of specimens to evaluate weldments
ISO 7539-9: 2003Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
ISO 7539-10: 2013Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
ISO 7539-11: 2013Corrosion of metals and alloys — Stress corrosion cracking — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
ISO 8044: 2015Corrosion of metals and alloys — Basic terms and definitions
ISO 8407: 2009Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
ISO 8565: 2011Metals and alloys — Atmospheric corrosion testing — General requirements
ISO 9223: 2012Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
ISO 9224: 2012Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
ISO 9225: 2012Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
ISO 9226: 2012Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
ISO 9227: 2017Corrosion tests in artificial atmospheres — Salt spray tests
ISO 9400: 1990Nickel-based alloys — Determination of resistance to intergranular corrosion
ISO 9591: 2004Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
ISO 10062: 2006Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
ISO 10270: 1995Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
ISO 10270 + COR 1: 1997Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
ISO 11130: 2017Corrosion of metals and alloys — Alternate immersion test in salt solution
ISO 11303: 2002Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion
ISO 11306: 1998Corrosion of metals and alloys — Guidelines for exposing and evaluating metals and alloys in surface sea water
ISO 11463: 1995Corrosion of metals and alloys — Evaluation of pitting corrosion
ISO 11474: 1998Corrosion of metals and alloys — Corrosion tests in artificial atmosphere — Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
ISO 11782-1: 1998Corrosion of metals and alloys — Corrosion fatigue testing — Part 1: Cycles to failure testing
ISO 11782-2: 1998Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens
ISO 11844-1: 2006Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity
ISO 11844-2: 2005Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres
ISO 11844-3: 2006Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
ISO 11845: 1995Corrosion of metals and alloys — General principles for corrosion testing
ISO 11846: 1995Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
ISO 11881: 1999Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys
ISO 11881 + COR 1: 1999Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys
ISO 12473: 2017General principles of cathodic protection in seawater
ISO 12696: 2016Cathodic protection of steel in concrete
ISO 12732: 2006Corrosion of metals and alloys — Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal’s method)
ISO 13174: 2012Cathodic protection of harbour installations
ISO 13573: 2012Corrosion of metals and alloys — Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
ISO 14802: 2012Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data
ISO 14993: 2001Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, “dry” and “wet” conditions
ISO 15158: 2014Corrosion of metals and alloys — Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
ISO 15257:2017Cathodic protection — Competence levels of cathodic protection persons — Basis for a certification scheme
ISO 15324: 2000Corrosion of metals and alloys — Evaluation of stress corrosion cracking by the drop evaporation test
ISO 15329: 2006Corrosion of metals and alloys — Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
ISO 16151: 2005Corrosion of metals and alloys — Accelerated cyclic tests with exposure to acidified salt spray, “dry” and “wet” conditions
ISO TR 16203:2016Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
ISO TR 16208: 2014Corrosion of metals and alloys — Test method for corrosion of materials by electrochemical impedance measurements
ISO TR 16335: 2013Corrosion of metals and alloys — Corrosion tests in artificial atmospheres — Guidelines for selection of accelerated corrosion test for product qualification
ISO 16539: 2013Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — “Dry” and “wet” conditions at constant absolute humidity
ISO 16540:2015Corrosion of metals and alloys — Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
ISO 16701: 2015Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
ISO 16784-1: 2006Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
ISO 16784-2: 2006Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
ISO 17081: 2014Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
ISO 17093:2015Corrosion of metals and alloys — Guidelines for corrosion test by electrochemical noise measurements
ISO 17224:2015Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
ISO 17245:2015Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
ISO 17248:2015Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
ISO 17474: 2012Corrosion of metals and alloys — Conventions applicable to electrochemical measurements in corrosion testing
ISO 17475: 2005Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
ISO 17475 + COR 1: 2006Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
ISO 17752: 2012Corrosion of metals and alloys — Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
ISO 17864: 2005Corrosion of metals and alloys — Determination of the critical pitting temperature under potientiostatic control
ISO 17918:2015Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
ISO 18069:2015Corrosion of metals and alloys — Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
ISO 18070:2015Corrosion of metals and alloys — Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
ISO 18086:2015Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria
ISO 18089:2015Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
ISO 19097-1:2018Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 1: Application in concrete
ISO 19097-2:2018Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 2: Application in soils and natural waters
ISO 19280:2017Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
ISO 21207: 2015Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
ISO 21601: 2013Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service
ISO 21608: 2012Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
ISO 21610: 2009Corrosion of metals and alloys — Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
ISO 26146: 2012Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments

Call Us

+90 533 197 19 81

Email Us

[email protected]

FOLLOW US

       

Visit Us

Beştepe Mah. Nergiz Sok. Via Flat İş Merkezi 7/2 Kat:3 No: 87

06560 Yenimahalle/Ankara

TURKEY

© Modulus Metal 2017-2022    |    All Rights Reserved

 

Privacy Policy Proudly powered by WordPress