USEFUL INFO:
LIST OF STANDARDS FOR METALLIC AND OTHER INORGANIC COATINGS
EN ISO 1456:2009 Metallic and other inorganic coatings – Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009)
EN ISO 1460:1994 Metallic coatings – Hot dip galvanized coatings on ferrous materials – Gravimetric determination of the mass per unit area (ISO 1460:1992)
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles – Specifications and test methods (ISO 1461:2009)
EN ISO 1463:2004 Metallic and oxide coatings – Measurement of coating thickness – Microscopical method (ISO 1463:2003)
EN ISO 2064:2000 Metallic and other inorganic coatings – Definitions and conventions concerning the measurement of thickness (ISO 2064:1996)
EN ISO 2080:2009 Metallic and other inorganic coatings – Surface treatment, metallic and other inorganic coatings – Vocabulary (ISO 2080:2008)
EN ISO 2081:2008 Metallic and other inorganic coatings – Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2008)
EN ISO 2082:2008 Metallic and other inorganic coatings – Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2008)
EN ISO 2177:2004 Metallic coatings – Measurement of coating thickness – Coulometric method by anodic dissolution (ISO 2177:2003)
EN ISO 2178:2016 Non-magnetic coatings on magnetic substrates – Measurement of coating thickness – Magnetic method (ISO 2178:2016)
EN ISO 2179:2016 Electroplated coatings of tin-nickel alloy – Specification and test methods (ISO 2179:1986)
EN ISO 2360:2003 Non-conductive coatings on non-magnetic electrically conductive basis materials – Measurement of coating thickness – Amplitude-sensitive eddy current method (ISO 2360:2003)
EN ISO 2361:1995 Electrodeposited nickel coatings on magnetic and non-magnetic substrates – Measurement of coating thickness – Magnetic method (ISO 2361:1982)
EN ISO 2746:2015 Vitreous and porcelain enamels – High voltage test (ISO 2746:2015)
EN ISO 2819:1994 Metallic coatings on metallic substrates – Electrodeposited and chemically deposited coatings – Review of methods available for testing adhesion (ISO 2819:1980)
EN ISO 3497:2000 Metallic coatings – Measurement of coating thickness – X-ray spectrometric methods (ISO 3497:2000)
EN ISO 3543:2000 Metallic and non-metallic coatings – Measurement of thickness – Beta backscatter method (ISO 3543:2000)
EN ISO 3543:2000/AC:2006 Metallic and non-metallic coatings – Measurement of thickness – Beta backscatter method (ISO 3543:2000)
EN ISO 3613:2010 Metallic and other inorganic coatings – Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys – Test methods (ISO 3613:2010)
EN ISO 3868:1994 Metallic and other non-organic coatings – Measurement of coating thicknesses – Fizeau multiple-beam interferometry method (ISO 3868:1976)
EN ISO 3882:2003 Metallic and other inorganic coatings – Review of methods of measurement of thickness (ISO 3882:2003)
EN ISO 3892:2001 Conversion coatings on metallic materials – Determination of coating mass per unit area – Gravimetric methods (ISO 3892:2000)
EN ISO 4516:2002 Metallic and other inorganic coatings – Vickers and Knoop microhardness tests (ISO 4516:2002)
EN ISO 4518:1995 Metallic coatings – Measurement of coating thickness – Profilometric method (ISO 4518:1980)
EN ISO 4519:2016 Electrodeposited metallic coatings and related finishes – Sampling procedures for inspection by attributes (ISO 4519:1980)
EN ISO 4521:2008 Metallic and other inorganic coatings – Electrodeposited silver and silver alloy coatings for engineering purposes – Specification and test methods (ISO 4521:2008)
EN ISO 4524-3:1995 Metallic coatings – Test methods for electrodeposited gold and gold alloy coatings – Part 3: Electrographic tests for porosity (ISO 4524-3:1985)
EN ISO 4524-6:1994 Metallic coatings – Test methods for electrodeposited gold aid gold alloy coatings – Part 6: Determination of the presence of residual salts (ISO 4524-6:1988)
EN ISO 4526:2004 Metallic coatings – Electroplated coatings of nickel for engineering purposes (ISO 4526:2004)
EN ISO 4527:2003 Metallic coatings – Autocatalytic (electroless) nickel-phosphorus alloy coatings – Specification and test methods (ISO 4527:2003)
EN ISO 4528:2015 Vitreous and porcelain enamel finishes – Guide to selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2015)
EN ISO 4534:2010 Vitreous and porcelain enamels – Determination of fluidity behaviour – Fusion flow test (ISO 4534:2010)
EN ISO 4536:1995 Metallic and non-organic coatings on metallic substrates – Saline droplets corrosion test (SD test) (ISO 4536:1985)
EN ISO 4538:1995 Metallic coatings – Thioacetamide corrosion test (TAA test) (ISO 4538:1978)
EN ISO 4541:1994 Metallic and other non-organic coatings – Corrodkote corrosion test (CORR test) (ISO 4541:1978)
EN ISO 4543:1994 Metallic and other non-organic coatings – General rules for corrosion tests applicable for storage conditions (ISO 4543:1981)
EN ISO 6158:2011 Metallic and other inorganic coatings – Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2011)
EN ISO 6509-1:2014 Corrosion of metals and alloys – Determination of dezincification resistance of copper alloys with zinc – Part 1: Test method (ISO 6509-1:2014)
EN ISO 6988:1994 Metallic and other non-organic coatings – Sulfur dioxide test with general condensation of moisture (ISO 6988:1985)
EN ISO 7384:1995 Corrosion test in artificial atmosphere – General requirements (ISO 7384:1986)
EN ISO 7441:2015 Corrosion of metals and alloys – Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015)
EN ISO 7539-1:2012 Corrosion of metals and alloys – Stress corrosion testing – Part 1: General guidance on testing procedures (ISO 7539-1:2012)
EN ISO 7539-2:1995 Corrosion of metals and alloys – Stress corrosion testing – Part 2: Preparation and use of bent-beam specimen (ISO 7539-2:1989)
EN ISO 7539-3:1995 Corrosion of metals and alloys – Stress corrosion testing – Part 3: Preparation and use of U-bend specimens (ISO 7539-3:1989)
EN ISO 7539-4:1995 Corrosion of metals and alloys – Stress corrosion testing – Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989)
EN ISO 7539-5:1995 Corrosion of metals and alloys – Stress corrosion testing – Part 5: Preparation and use of C-ring specimens (ISO 7539-5:1989)
EN ISO 7539-6:2011 Corrosion of metals and alloys – Stress corrosion testing – Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement (ISO 7539-6:2011)
EN ISO 7539-7:2005 Corrosion of metals and alloys – Stress corrosion testing – Part 7: Method for slow strain rate testing (ISO 7539-7:2005)
EN ISO 7539-8:2008 Corrosion of metals and alloys – Stress corrosion testing – Part 8: Preparation and use of specimens to evaluate weldments (ISO 7539-8:2000)
EN ISO 7539-9:2008 Corrosion of metals and alloys – Stress corrosion testing – Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2003)
EN ISO 7539-10:2014 Corrosion of metals and alloys – Stress corrosion testing – Part 10: Reverse U-bend method (ISO 7539-10:2013)
EN ISO 7539-11:2014 Corrosion of metals and alloys – Stress corrosion testing – Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013)
EN ISO 8044:2015 Corrosion of metals and alloys – Basic terms and definitions (ISO 8044:2015)
EN ISO 8289:2001 Vitreous and porcelain enamels – Low voltage test for detecting and locating defects (ISO 8289:2000)
EN ISO 8401:2017 Metallic coatings – Review of methods of measurement of ductility (ISO 8401:2017)
EN ISO 8407:2014 Corrosion of metals and alloys – Removal of corrosion products from corrosion test specimens (ISO 8407:2009)
EN ISO 8565:2011 Metals and alloys – Atmospheric corrosion testing – General requirements (ISO 8565:2011)
EN ISO 9220:1994 Metallic coatings – Measurement of coating thickness – Scanning electron microscope method (ISO 9220:1988)
EN ISO 9223:2012 Corrosion of metals and alloys – Corrosivity of atmospheres – Classification, determination and estimation (ISO 9223:2012)
EN ISO 9224:2012 Corrosion of metals and alloys – Corrosivity of atmospheres – Guiding values for the corrosivity categories (ISO 9224:2012)
EN ISO 9225:2012 Corrosion of metals and alloys – Corrosivity of atmospheres – Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012)
EN ISO 9226:2017 Corrosion tests in artificial atmospheres – Salt spray tests (ISO 9227:2017)
EN ISO 9227:2012 Corrosion tests in artificial atmospheres – Salt spray tests (ISO 9227:2012)
EN ISO 9400:1995 Nickel-based alloys – Determination of resistance to intergranular corrosion (ISO 9400:1990)
EN ISO 9717:2013 Metallic and other inorganic coatings – Phosphate conversion coating of metals (ISO 9717:2010)
EN ISO 10062:2008 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006)
EN ISO 10111:2001 Metallic and other inorganic coatings – Measurement of mass per unit area – Review of gravimetric and chemical analysis methods (ISO 10111:2000)
EN ISO 10270:2008 Corrosion of metals and alloys – Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors (ISO 10270:1995, including Cor 1:1997)
EN ISO 10289:2001 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates – Rating of test specimens and manufactured articles subjected to corrosion tests (ISO 10289:1999)
EN ISO 10308:2006 Metallic coatings – Review of porosity tests (ISO 10308:2006)
EN ISO 10309:2016 Metallic coatings – Porosity tests – Ferroxyl test (ISO 10309:1994)
EN ISO 11130:2010 Corrosion of metals and alloys – Alternate immersion test in salt solution (ISO 11130:2010)
EN ISO 11303:2008 Corrosion of metals and alloys – Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002)
EN ISO 11306:1998 Corrosion of metals and alloys – Guidelines for exposing and evaluating metals and alloys in surface sea water (ISO 11306:1998)
EN ISO 11177:2016 Vitreous and porcelain enamels – Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply – Quality requirements and testing (ISO 11177:2016)
EN ISO 11463:2008 Corrosion of metals and alloys – Evaluation of pitting corrosion (ISO 11463:1995)
EN ISO 11474:2014 Corrosion of metals and alloys – Corrosion tests in artificial atmosphere – Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) (ISO 11474:1998)
EN ISO 11782-1:2008 Corrosion of metals and alloys – Corrosion fatigue testing – Part 1: Cycles to failure testing (ISO 11782-1:1998)
EN ISO 11782-2:2008 Corrosion of metals and alloys – Corrosion fatigue testing – Part 2: Crack propagation testing using precracked specimens (ISO 11782-2:1998)
EN ISO 11844-1:2008 Corrosion of metals and alloys – Classification of low corrosivity of indoor atmospheres – Part 1: Determination and estimation of indoor corrosivity (ISO 11844-1:2006)
EN ISO 11844-2:2008 Corrosion of metals and alloys – Classification of low corrosivity of indoor atmospheres – Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2005)
EN ISO 11844-3:2008 Corrosion of metals and alloys – Classification of low corrosivity of indoor atmospheres – Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006)
EN ISO 11846:2008 Corrosion of metals and alloys – Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys (ISO 11846:1995)
EN 12487:2007 Corrosion protection of metals – Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
EN 12487:2007/AC:2008 Corrosion protection of metals – Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
EN 12501-1:2003 Protection of metallic materials against corrosion – Corrosion likelihood in soil – Part 1: General
EN 12501-2:2003 Protection of metallic materials against corrosion – Corrosion likelihood in soil – Part 2: Low alloyed and non alloyed ferrous materials
EN 12502-1:2004 Protection of metallic materials against corrosion – Guidance on the assessment of corrosion likelihood in water distribution and storage systems – Part 1: General
EN 12502-2:2004 Protection of metallic materials against corrosion – Guidance on the assessment of corrosion likelihood in water distribution and storage systems – Part 2: Influencing factors for copper and copper alloys
EN 12502-3:2004 Protection of metallic materials against corrosion – Guidance on the assessment of corrosion likelihood in water distribution and storage systems – Part 3: Influencing factors for hot dip galvanised ferrous materials
EN 12502-4:2004 Protection of metallic materials against corrosion – Guidance on the assessment of corrosion likelihood in water distribution and storage systems – Part 4: Influencing factors for stainless steels
EN 12502-5:2004 Protection of metallic materials against corrosion – Guidance on the assessment of corrosion likelihood in water distribution and storage systems – Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels
EN ISO 12683:2004 Mechanically deposited coatings of zinc – Specification and test methods (ISO 12683:2004)
EN ISO 12687:1998 Metallic coatings – Porosity tests – Humid sulfur (flowers of sulfur) test (ISO 12687:1996)
EN ISO 12732:2008 Corrosion of metals and alloys – Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal’s method) (ISO 12732:2006)
EN 13144:2003 Metallic and other inorganic coatings – Method for quantitative measurement of adhesion by tensile test
EN ISO 13805:2009 Vitreous and porcelain enamels for aluminium – Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) (ISO 13805:1999)
EN ISO 13807:2009 Vitreous and porcelain enamels – Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry (ISO 13807:1999, including Cor 1:2000)
EN 13811:2003 Sherardizing – Zinc diffusion coatings on ferrous products – Specification
EN 13858:2006 Corrosion protection of metals – Non-electrolytically applied zinc flake coatings on iron or steel components
EN 14571:2005 Metallic coatings on nonmetallic basis materials – Measurement of coating thickness – Microresistivity method
EN ISO 14647:2016 Metallic coatings – Determination of porosity in gold coatings on metal substrates – Nitric acid vapour test (ISO 14647:2000)
EN ISO 14713-1:2017 Zinc coatings – Guidelines and recommendations for the protection against corrosion of iron and steel in structures – Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017
EN ISO 14713-2:2009 Zinc coatings – Guidelines and recommendations for the protection against corrosion of iron and steel in structures – Part 2: Hot dip galvanizing (ISO 14713-2:2009)
EN ISO 14713-3:2017 Zinc coatings – Guidelines and recommendations for the protection against corrosion of iron and steel in structures – Part 3: Sherardizing (ISO 14713-3:2017)
EN 14868:2005 Protection of metallic materials against corrosion – Guidance on the assessment of corrosion likelihood in closed water circulation systems
EN 15042-1:2006 Thickness measurement of coatings and characterization of surfaces with surface waves – Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
EN 15042-2:2006 Thickness measurement of coatings and characterization of surfaces with surface waves – Part 2: Guide to the thickness measurement of coatings by photothermic method
EN ISO 15324:2008 Corrosion of metals and alloys – Evaluation of stress corrosion cracking by the drop evaporation test (ISO 15324:2000)
EN ISO 15329:2008 Corrosion of metals and alloys – Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys (ISO 15329:2006)
EN 15646:2009 Electrodeposited coatings – Electroplated coatings of aluminium and aluminium alloys with supplementary treatment – Requirements and test methods
EN ISO 15695:2001 Vitreous and porcelain enamels – Determination of scratch resistance of enamel finishes (ISO 15695:2000, including Technical Corrigendum 1:2000)
EN ISO 15720:2001 Metallic coatings – Porosity tests – Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography (ISO 15720:2001)
EN ISO 15721:2001 Metallic coatings – Porosity tests – Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour (ISO 15721:2001)
EN ISO 15730:2016 Metallic and other inorganic coatings – Electropolishing as a means of smoothing and passivating stainless steel (ISO 15730:2000)
EN 15771:2010 Vitreous and porcelain enamels – Determination of surface scratch hardness according to the Mohs scale
EN 15826:2009 Vitreous and porcelain enamels – Terminology
EN ISO 16151:2008 Corrosion of metals and alloys – Accelerated cyclic tests with exposure to acidified salt spray, ”dry” and ”wet” conditions (ISO 16151:2005)
EN ISO 16348:2003 Metallic and other inorganic coatings – Definitions and conventions concerning appearance (ISO 16348:2003)
EN ISO 16701:2015 Corrosion of metals and alloys – Corrosion in artificial atmosphere – Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015)
EN ISO 16784-1:2008 Corrosion of metals and alloys – Corrosion and fouling in industrial cooling water systems – Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems (ISO 16784-1:2006)
EN ISO 16784-2:2008 Corrosion of metals and alloys – Corrosion and fouling in industrial cooling water systems – Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig (ISO 16784-2:2006)
EN ISO 17081:2014 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (ISO 17081:2014)
EN ISO 17475:2008 Corrosion of metals and alloys – Electrochemical test methods – Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
EN ISO 17668:2016 Zinc diffusion coatings on ferrous products – Sherardizing – Specification (ISO 17668:2016)
EN ISO 17864:2008 Corrosion of metals and alloys – Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
EN ISO 18332:2008 Metallic and other inorganic coatings – Definitions and conventions concerning porosity (ISO 18332:2007)
EN ISO 19496-1:2017 Vitreous and porcelain enamels – Terminology – Part 1: Terms and definitions (ISO 19496-1:2017)
EN SIO 19496-2:2017 Vitreous and porcelain enamels – Terminology – Part 2: Visual representations and descriptions (ISO 19496-2:2017)
EN ISO 19598:2016 Metallic coatings – Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016)
EN ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials – Measurement of coating thickness – Phase-sensitive eddy-current method (ISO 21968:2005)
EN ISO 26945:2011 Metallic and other inorganic coatings – Electrodeposited coatings of tin-cobalt alloy (ISO 26945:2011)
EN ISO 27830:2013 Metallic and other inorganic coatings – Guidelines for specifying metallic and inorganic coatings (ISO 27830:2008)
EN ISO 27874:2008 Metallic and other inorganic coatings – Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes – Specification and test methods (ISO 27874:2008)
EN ISO 28706-1:2011 Vitreous and porcelain enamels – Determination of resistance to chemical corrosion – Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008)
EN ISO 28706-2:2017 Vitreous and porcelain enamels – Determination of resistance to chemical corrosion – Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017)
EN ISO 28706-3:2011 Vitreous and porcelain enamels – Determination of resistance to chemical corrosion – Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (ISO 28706-3:2008)
EN ISO 28706-4:2016 Vitreous and porcelain enamels – Determination of resistance to chemical corrosion – Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016)
EN ISO 28706-5:2011 Vitreous and porcelain enamels – Determination of resistance to chemical corrosion – Part 5: Determination of resistance to chemical corrosion in closed systems (ISO 28706-5:2010)
EN ISO 28721-1:2011 Vitreous and porcelain enamels – Glass-lined apparatus for process plants – Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2008)
EN ISO 28721-2:2015 Vitreous and porcelain enamels – Glass-lined apparatus for process plants – Part 2: Designation and specification of resistance to chemical attack and thermal shock (ISO 28721-2:2015)
EN ISO 28721-3:2011 Vitreous and porcelain enamels – Glass-lined apparatus for process plants – Part 3: Thermal shock resistance (ISO 28721-3:2008)
EN ISO 28721-4:2015 Vitreous and porcelain enamels – Glass-lined apparatus for process plants – Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO 28721-4:2015)
EN ISO 28721-5:2016 Vitreous and porcelain enamels – Glass-lined apparatus for process plants – Part 5: Presentation and characterisation of defects (ISO 28721-5:2016)
EN ISO 28722:2011 Vitreous and porcelain enamels – Characteristics of enamel coatings applied to steel panels intended for architecture (ISO 28722:2008)
EN ISO 28723:2011 Vitreous and porcelain enamels – Determination of the edge covering on enamelled steel plate to be used in heat exchangers (ISO 28723:2008)
EN ISO 28762:2010 Vitreous and porcelain enamels – Enamel coatings applied to steel for writing surfaces – Specification (ISO 28762:2010)
EN ISO 28763:2011 Vitreous and porcelain enamels – Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers – Specifications (ISO 28763:2008)
EN ISO 28764:2015 Vitreous and porcelain enamels – Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron (ISO 28764:2015)
EN ISO 28765:2016 Vitreous and porcelain enamels – Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016)