Home » Brass Alloys » CuZn35Sn1 (C85700) Naval Brass, Sand-Cast Material Data Sheet
CuZn35Sn1 (C85700) Naval Brass Material Data Sheet (Cast, Sand-Cast)
CuZn35Sn1 C85700 Sand-Cast Overview
CuZn35Sn1 C85700 sand-cast is a cast brass (UNS C85700), known as naval brass. Condition: Sand-Cast. This CuZn35Sn1 C85700 sand-cast material data sheet covers its designation, chemical composition, physical, mechanical, thermal, electrical and magnetic properties, processing and corrosion behaviour, and standards with similar compositions. Looking for CuZn35Sn1 brass castings from Turkey (Türkiye)? Modulus Metal supplies CuZn35Sn1 brass castings with in-house CNC machining and inspects them before shipment.
CuZn35Sn1 Designation
CuZn35Sn1 UNS number C85700 US name C85700 to ASTM B584, ASTM B30, ASTM B763, ASTM B505, ASTM B271 ISO name CuZn35Pb1Sn1
CuZn35Sn1 Typical uses
Marine fittings, pumps, fastenings, heat exchangers, machined items.
CuZn35Sn1 C85700 Sand-Cast Composition detail
Al (aluminum) 0 – 0.8 % Cu (copper) 58 – 64 % Fe (iron) 0 – 0.7 % Ni (nickel) 0 – 1 % Pb (lead) 0.8 – 1.5 % Si (silicon) 0 – 0.05 % Sn (tin) 0.5 – 1.5 % Zn (zinc) 32 – 40 %
CuZn35Sn1 Physical properties
CuZn35Sn1 C85700 Sand-Cast Mechanical properties
Young’s modulus 95 – 97 GPa Specific stiffness 11.6 – 11.9 MN.m/kg Yield strength (elastic limit) 70 – 110 MPa Tensile strength 250 – 310 MPa Specific strength 8.59 – 13.5 kN.m/kg Elongation 18 – 40 % strain Compressive strength 70 – 110 MPa Flexural modulus 95 – 97 GPa Flexural strength (modulus of rupture) 70 – 110 MPa Shear modulus 35.2 – 35.9 GPa Bulk modulus 103 – 105 GPa Poisson’s ratio 0.34 – 0.35 Shape factor 30 Hardness – Vickers 50 – 75 HV Elastic stored energy (springs) 26.6 – 60.4 kJ/m3 Fatigue strength at 10^7 cycles 130 – 150 MPa Fatigue strength model (stress range) Parameters: Stress Ratio = -1, Number of Cycles = 1e7cycles 110 – 177 MPa
CuZn35Sn1 Impact & fracture properties
Fracture toughness 73.1 – 86.4 MPa.m0.5 Toughness (G) 56 – 77.3 kJ/m2
CuZn35Sn1 C85700 Sand-Cast Thermal properties
Melting point 917 – 932 °C Maximum service temperature 120 – 130 °C Minimum service temperature -273 °C Thermal conductivity 80.5 – 87.3 W/m.°C Specific heat capacity 375 – 377 J/kg.°C Thermal expansion coefficient 18.8 – 19.2 µstrain/°C Thermal shock resistance 38.4 – 60.3 °C Thermal distortion resistance 4.23 – 4.6 MW/m Latent heat of fusion 220 – 240 kJ/kg
CuZn35Sn1 Electrical properties
Electrical resistivity 7.6 – 8 µohm.cm Electrical conductivity 21.6 – 22.7 %IACS Galvanic potential -0.34 – -0.26 V
CuZn35Sn1 Magnetic properties
Magnetic type Non-magnetic
CuZn35Sn1 Optical, aesthetic and acoustic properties
Transparency Opaque Acoustic velocity 3410 – 3460 m/s Mechanical loss coefficient (tan delta) 3.31e-4 – 8.16e-4
CuZn35Sn1 Processing properties
Metal casting Acceptable Metal cold forming Unsuitable Metal hot forming Unsuitable Metal press forming Unsuitable Metal deep drawing Unsuitable Machining speed 85.3 m/min Weldability Notes: Preheating and post weld heat treatments are required, and contains hazardous elements Poor
CuZn35Sn1 Durability
Water (fresh) Excellent Water (salt) Excellent Weak acids Acceptable Strong acids Unacceptable Weak alkalis Excellent Strong alkalis Excellent Organic solvents Excellent Oxidation at 500C Limited use UV radiation (sunlight) Excellent Galling resistance (adhesive wear) Excellent Flammability Non-flammable
CuZn35Sn1 C85700 Sand-Cast Corrosion resistance
Stress corrosion cracking Note: Rated in ammoniacal; Other susceptible environments: Water, amine, dinitrogen tetroxide Highly susceptible
CuZn35Sn1 Notes
CuZn35Sn1 C85700 Sand-Cast Other notes (s)=soft; (1/2 h)=half hard; (h)=hard; (xh)=extra hard; (hr) = hot rolled; (w)=soln heat-trtd; (wh)=soln heat-trtd & work hdnd; (wp)=soln heat-trtd & precip hdnd; (whp)=precip hdnd after cold-wkng; (wph)=work hdnd after precip hdng.
CuZn35Sn1 Standards with similar compositions
France: U-Z40-Y30 to NF A53-703South Africa: Cu-Zn40 to SABS 200Sweden: 5253-06 to SIS 145253USA: C85700, C85700 to ASTM B176, C85700 to ASTM B271, C85700 to ASTM B30, C85700 to ASTM B505, C85700 to ASTM B584, C85700 to ASTM B763, UNS C85700
Brass Alloys
CuZn35Sn1 (C85700) Material Data Sheets
Cast Sand-Cast You are here
All Brass Grades
Modulus Metal Services
Manufacturing & Quality Services in Turkey