Skip to content
Modulus Metal

Modulus Metal

sourcing and quality

  • Home
  • About Us
  • Our Products
    • Casting
      • Sand Casting
      • Die Casting
      • Centrifugal Casting
      • Investment Casting
    • Deformation
      • Drawing
      • Extrusion
      • Forging/ Rolling
      • Sheet Metal
    • Molding
      • Blow Molding
      • Injection Molding
      • Polymer Casting
      • Polymer Extrusion
    • Machining
      • Standart Machining Process
      • Thermal
      • Sheet / Film
      • Abrasive
      • Electrical and Chemical Machining
    • Joining
      • Thermal Welding
      • Mechanical Welding
      • Fasteners
        • Screw Fasten
        • Rivets and Staples
        • Snap and Press Fit
      • Adhesives
    • Heat Treatment
      • Annealing / Normalizing
      • Case Hardening with Subsequent Hardening Operation
      • Case Hardening without Subsequent Hardening Operation
      • Hardening and Tempering
      • Solution and Age Hardening
      • Stress Relieving
    • Surface Treatment
      • Surface Coating
        • Plating and Metal Coating
        • Cladding
        • Chemical Conversion Coating
        • Polymer Powder Coating
        • Thermal Spraying
      • Polishing / Texturing / Etching
      • Surface Heat Treatment
      • Painting
    • 3D Printing
    • Powder Metallurgy
  • Quality Controls
    • Resident Engineering Services
    • Process Control
    • PPAP Control and Part Approval Process
    • Final Inspection or Pre-Shipment Controls
    • 3rd Party Operations & Containment Management
    • 8D Management
    • Loading and Unloading Inspections
    • Statistical Quality & Optimization
  • Testing Services
    • Mechanical Testing Services
    • Chemical Analysis Services
    • Metallurgical Testing
    • Non Destructive Testing Methods (NDT Testing)
    • Surface Roughness Testing
    • Paint and Coating Adhesion Testing
  • Material Grades
    • Metals and Alloys
      • Ferrous
      • Non-Ferrous
    • Polymers
  • Contact Us

Thermal Spraying

Flame Plasma Spraying in Turkey

Flame Spraying

Electric Wire Arc Spraying

Plasma-Arc Spraying

USEFUL INFO

List of Thermal Spraying And Thermally Sprayed Coatings Standards

Show the Standards
Standard NumberStandard
EN 582:1993Thermal spraying – Determination of tensile adhesive strength
EN 657:2005Thermal spraying – Terminology, classification
EN 1274:2004Thermal spraying – Powders – Composition, technical supply conditions
EN 1395-1:2007Thermal spraying – Acceptance inspection of thermal spraying equipment – Part 1: General requirements
EN 1395-2:2007Thermal spraying – Acceptance inspection of thermal spraying equipment – Part 2: Flame spraying including HVOF
EN 1395-3:2007Thermal spraying – Acceptance inspection of thermal spraying equipment – Part 3: Arc spraying
EN 1395-4:2007Thermal spraying – Acceptance inspection of thermal spraying equipment – Part 4: Plasma spraying
EN 1395-5:2007Thermal spraying – Acceptance inspection of thermal spraying equipment – Part 5: Plasma spraying in chambers
EN 1395-6:2007Thermal spraying – Acceptance inspection of thermal spraying equipment – Part 6: Manipulator systems
EN 1395-7:2007Thermal spraying – Acceptance inspection of thermal spraying equipment – Part 7: Powder feed systems
EN ISO 2063:2005Thermal spraying – Metallic and other inorganic coatings – Zinc, aluminium and their alloys (ISO 2063:2005)
EN ISO 12670:2015Thermal spraying – Components with thermally sprayed coatings – Technical supply conditions (ISO 12670:2011)
EN ISO 12671:2014Thermal spraying – Thermally sprayed coatings – Symbolic representation on drawings (ISO 12671:2012)
EN ISO 12679:2015Thermal spraying – Recommendations for thermal spraying (ISO 12679:2011)
EN ISO 12690:2010Metallic and other inorganic coatings – Thermal spray coordination – Tasks and responsibilities (ISO 12690:2010)
EN ISO 13123:2011Metallic and other inorganic coatings – Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011)
EN 13507:2010Thermal spraying – Pre-treatment of surfaces of metallic parts and components for thermal spraying
EN 14616:2004Thermal spraying – Recommendations for thermal spraying
EN ISO 14918:1998Thermal spraying – Approval testing of thermal sprayers (ISO 14918:1998)
EN ISO 14919:2015Thermal spraying – Wires, rods and cords for flame and arc spraying – Classification – Technical supply conditions (ISO 14919:2015)
EN ISO 14920:2015Thermal spraying – Spraying and fusing of self-fluxing alloys (ISO 14920:2015)
EN ISO 14921:2010Thermal spraying – Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010)
EN ISO 14922-1:1999Thermal spraying – Quality requirements of thermally sprayed structures – Part 1: Guidance for selection and use (ISO 14922-1:1999)
EN ISO 14922-2:1999Thermal spraying – Quality requirements of thermally sprayed structures – Part 2: Comprehensive quality requirements (ISO 14922-2:1999)
EN ISO 14922-3:1999Thermal spraying – Quality requirements of thermally sprayed structures – Part 3: Standard quality requirements (ISO 14922-3:1999)
EN ISO 14922-4:1999Thermal spraying – Quality requirements of thermally sprayed structures – Part 4: Elementary quality requirements (ISO 14922-4:1999)
EN ISO 14923:2003Thermal spraying – Characterization and testing of thermally sprayed coatings (ISO 14923:2003)
EN ISO 14924:2005Thermal spraying – Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005)
EN 15311:2007Thermal spraying – Components with thermally sprayed coatings – Technical supply conditions
CEN/TR 15339-1:2014Thermal spraying – Safety requirements for thermal spraying equipment – Part 1: General requirements
EN 15339-2:2007Thermal spraying – Safety requirements for thermal spraying equipment – Part 2: Gas control units
CEN/TR 15339-3:2014Thermal spraying – Safety requirements for thermal spraying equipment – Part 3: Torches for thermal spraying and their connection and supply units
CEN/TR 15339-4:2014Thermal spraying – Safety requirements for thermal spraying equipment – Part 4: Gas and liquid fuel supply
CEN/TR 15339-5:2014Thermal spraying – Safety requirements for thermal spraying equipment – Part 5: Powder and wire feed units
CEN/TR 15339-6:2014Thermal spraying – Safety requirements for thermal spraying equipment – Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter
EN 15340:2007Thermal spraying – Determination of shear load resistance of thermally sprayed coatings
EN 15520:2007Thermal spraying – Recommendations for constructional design of components with thermally sprayed coatings
EN 15648:2009Thermal spraying – Component related procedure qualification
EN 16813:2016Thermal spraying – Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
EN ISO 17834:2003Thermal spraying – Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003)
EN ISO 17836:2004Thermal spraying – Determination of the deposition efficiency for thermal spraying (ISO 17836:2004)

Call Us

+90 533 197 19 81

Email Us

info@modulusmetal.com

FOLLOW US

       

Visit Us

Beştepe Mah. Nergiz Sok. Via Flat İş Merkezi 7/2 Kat:3 No: 87

06560 Yenimahalle/Ankara

TURKEY

© Modulus Metal 2017-2022    |    All Rights Reserved

 

Privacy Policy Proudly powered by WordPress