Skip to content
Modulus Metal Company Logo_TURKEY

Modulus Metal

sourcing and quality

  • Home
  • About Us
  • Our Products
    • Casting
      • Sand Casting
      • Die Casting
      • Centrifugal Casting
      • Investment Casting
    • Deformation
      • Drawing
      • Extrusion
      • Forging/ Rolling
      • Sheet Metal
    • Molding
      • Blow Molding
      • Plastic Injection Molding
      • Polymer Casting
      • Polymer Extrusion
    • Machining
      • CNC Machining Process
      • Thermal Metal Cutting Service
      • Sheet / Film
      • Abrasive
      • Electrical and Chemical Machining
    • Joining
      • Thermal Welding
      • Mechanical Welding
      • Fasteners
        • Screw Fasten
        • Rivets and Staples
        • Snap and Press Fit
      • Adhesives
    • Heat Treatment
      • Annealing / Normalizing
      • Case Hardening with Subsequent Hardening Operation
      • Case Hardening without Subsequent Hardening Operation
      • Hardening and Tempering
      • Solution and Age Hardening
      • Stress Relieving
    • Surface Treatment
      • Surface Coating
        • Plating and Metal Coating
        • Cladding
        • Chemical Conversion Coating
        • Polymer Powder Coating
        • Thermal Spraying
      • Polishing / Texturing / Etching
      • Surface Heat Treatment
      • Painting
    • 3D Printing
    • Powder Metallurgy
  • Quality Controls
    • Resident Engineering Services
    • Process Control
    • PPAP Control and Part Approval Process
    • Final Inspection or Pre-Shipment Controls
    • 3rd Party Operations & Containment Management
    • 8D Management
    • Loading and Unloading Inspections
    • Statistical Quality & Optimization
  • Testing Services
    • Mechanical Testing Services
    • Chemical Analysis Services
    • Metallurgical Testing
    • Non Destructive Testing Methods (NDT Testing)
    • Surface Roughness Testing
    • Paint and Coating Adhesion Testing
  • Material Grades
    • Metals and Alloys
      • Ferrous
      • Non-Ferrous
    • Polymers
  • Contact Us

Heat Treatment

Annealing/ Normalizing
Case Hardening with Subsequent Hard. Op.
Case Hardening without Subsequent Hard. Op.
Hardening and Tempering
Solution and Age Hardening
Stress Relieving
Microstructure_Grains vs Temperature
Heat Treatment Supplier in Turkey
Iron-carbon Phase Diagram

USEFUL INFORMATION

List of Standards of Steels for Heat Treatment

Show the Standards

EN ISO 4957:1999 Tool steels (ISO 4957:1999)

EN ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels – Part 17: Ball and roller bearing steels (ISO 683-17:2014)

EN ISO 9444-2:2010 Continuously hot-rolled stainless steel – Tolerances on dimensions and form – Part 2: Wide strip and sheet/plate (ISO 9444-2:2009)

EN ISO 9445-1:2010 Continuously cold-rolled stainless steel – Tolerances on dimensions and form – Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)

EN ISO 9445-2:2010 Continuously cold-rolled stainless steel – Tolerances on dimensions and form – Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)

EN 10083-1:2006 Steels for quenching and tempering – Part 1: General technical delivery conditions

EN 10083-2:2006 Steels for quenching and tempering – Part 2: Technical delivery conditions for non alloy steels

EN 10083-3:2006 Steels for quenching and tempering – Part 3: Technical delivery conditions for alloy steels

EN 10083-3:2006/AC:2008 Steels for quenching and tempering – Part 3: Technical delivery conditions for alloy steels

EN 10084:2008 Case hardening steels – Technical delivery conditions

EN 10085:2001 Nitriding steels – Technical delivery conditions

EN 10087:1998 Free-cutting steels – Technical delivery conditions for semi-finished products, hot-rolled bars and rods

EN 10088-1:2014 Stainless steels – Part 1: List of stainless steels

EN 10088-2:2014 Stainless steels – Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

EN 10088-3:2014 Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

EN 10088-4:2009 Stainless steels – Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes

EN 10088-5:2009 Stainless steels – Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes

EN 10089:2002 Hot-rolled steels for quenched and tempered springs – Technical delivery conditions

EN 10090:1998 Valve steels and alloys for internal combustion engines

EN 10095:1999 Heat resisting steels and nickel alloys

EN 10132-1:2000 Cold rolled narrow steel strip for heat treatment – Technical delivery conditions – Part 1: General

EN 10132-2:2000 Cold rolled narrow steel strip for heat treatment – Technical delivery conditions – Part 2: Case hardening steels

EN 10132-3:2000 Cold rolled narrow steel strip for heat treatment – Technical delivery conditions – Part 3: Steels for quenching and tempering

EN 10132-4:2000 Cold rolled narrow steel strip for heat treatment – Technical delivery conditions – Part 4: Spring steels and other applications

EN 10132-4:2000/AC:2002 Cold rolled narrow steel strip for heat treatment – Technical delivery conditions – Part 4: Spring steels and other applications

EN 10151:2002 Stainless steel strip for springs – Technical delivery conditions

EN 10221:1995 Surface quality classes for hot-rolled bars and rods – Technical delivery conditions

EN 10267:1998 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures

EN 10277-1:2008 Bright steel products – Technical delivery conditions – Part 1: General

EN 10277-2:2008 Bright steel products – Technical delivery conditions – Part 2: Steels for general engineering purposes

EN 10277-3:2008 Bright steel products – Technical delivery conditions – Part 3: Free-cutting steels

EN 10277-4:2008 Bright steel products – Technical delivery conditions – Part 4: Case hardening steels E

N 10277-5:2008 Bright steel products – Technical delivery conditions – Part 5: Steels for quenching and tempering

EN 10278:1999 Dimensions and tolerances of bright steel products

EN 10302:2008 Creep resisting steels, nickel and cobalt alloys

EN 10343:2009 Steels for quenching and tempering for construction purposes – Technical delivery conditions

EN ISO 18286:2010 Hot-rolled stainless steel plates – Tolerances on dimensions and shape (ISO 18286:2008)

Call Us

+90 533 197 19 81

Email Us

[email protected]

FOLLOW US

       

Visit Us

Beştepe Mah. Nergiz Sok. Via Flat İş Merkezi 7/2 Kat:3 No: 87

06560 Yenimahalle/Ankara

TURKEY

© Modulus Metal 2017-2022    |    All Rights Reserved

 

Privacy Policy Proudly powered by WordPress