Home » Brass Alloys » CuZn38Mn1.5 High-Tensile Brass, Hot Worked Material Data Sheet
CuZn38Mn1.5 High-Tensile Brass Material Data Sheet (Wrought, Hot Worked)
CuZn38Mn1.5 Hot Worked Brass Overview
CuZn38Mn1.5 hot worked brass is a wrought brass (CZ115), known as high-tensile brass. Condition: Hot worked. This CuZn38Mn1.5 hot worked brass material data sheet covers its designation, chemical composition, physical, mechanical, thermal, electrical and magnetic properties, processing and corrosion behaviour, and standards with similar compositions. Looking for CuZn38Mn1.5 brass parts from Turkey (Türkiye)? Modulus Metal manufactures CNC machined CuZn38Mn1.5 brass parts in-house and inspects them before shipment.
CuZn38Mn1.5 Designation
CuZn38Mn1.5, wrought Condition Hot worked EN name CZ115 Tradenames HT1
CuZn38Mn1.5 Typical uses
Architectural sections, fixings, forgings, pump parts, pressure tubes.
CuZn38Mn1.5 Hot Worked Brass Composition detail
Cu (copper) 58 % Fe (iron) 0.75 % Mn (manganese) 1.5 % Pb (lead) 1 % Sn (tin) 0.75 % Zn (zinc) 38 %
CuZn38Mn1.5 Physical properties
CuZn38Mn1.5 Hot Worked Brass Mechanical properties
Young’s modulus 97 – 103 GPa Specific stiffness 11.7 – 12.5 MN.m/kg Yield strength (elastic limit) 140 – 150 MPa Tensile strength 370 – 390 MPa Specific strength 16.9 – 18.2 kN.m/kg Elongation 33 – 35 % strain Compressive strength 140 – 150 MPa Flexural modulus 97 – 103 GPa Flexural strength (modulus of rupture) 140 – 150 MPa Shear modulus 35.9 – 38.1 GPa Bulk modulus 105 – 111 GPa Poisson’s ratio 0.34 – 0.35 Shape factor 29 Hardness – Vickers 85 – 95 HV Elastic stored energy (springs) 97.6 – 113 kJ/m3 Fatigue strength at 10^7 cycles 168 – 174 MPa Fatigue strength model (stress range) Parameters: Stress Ratio = -1, Number of Cycles = 1e7cycles 162 – 181 MPa
CuZn38Mn1.5 Impact & fracture properties
Fracture toughness 63.3 – 65.5 MPa.m0.5 Toughness (G) 39.7 – 43.4 kJ/m2
CuZn38Mn1.5 Hot Worked Brass Thermal properties
Melting point 877 – 900 °C Maximum service temperature 97 – 110 °C Minimum service temperature -200 °C Thermal conductivity 120 – 125 W/m.°C Specific heat capacity 376 – 378 J/kg.°C Thermal expansion coefficient 19.4 – 20.6 µstrain/°C Thermal shock resistance 68.7 – 76.6 °C Thermal distortion resistance 5.91 – 6.35 MW/m Latent heat of fusion 220 – 240 kJ/kg
CuZn38Mn1.5 Electrical properties
Electrical resistivity 7.59 – 8.13 µohm.cm Electrical conductivity 21.2 – 22.7 %IACS Temperature dependence of resistivity 2.5 – 3.5 /°C Galvanic potential -0.36 – -0.28 V
CuZn38Mn1.5 Magnetic properties
Magnetic type Non-magnetic
CuZn38Mn1.5 Optical, aesthetic and acoustic properties
Transparency Opaque Acoustic velocity 3420 – 3530 m/s Mechanical loss coefficient (tan delta) 1.78e-4 – 2.04e-4
CuZn38Mn1.5 Processing properties
Metal casting Unsuitable Metal cold forming Excellent Metal hot forming Excellent Metal press forming Excellent Metal deep drawing Limited use Machining speed 88.4 m/min Weldability Notes: Preheating and post weld heat treatments are required, and contains hazardous elements Poor
CuZn38Mn1.5 Durability
Water (fresh) Excellent Water (salt) Excellent Weak acids Acceptable Strong acids Unacceptable Weak alkalis Excellent Strong alkalis Excellent Organic solvents Excellent Oxidation at 500C Limited use UV radiation (sunlight) Excellent Galling resistance (adhesive wear) Excellent Flammability Non-flammable
CuZn38Mn1.5 Hot Worked Brass Corrosion resistance
Stress corrosion cracking Note: Rated in ammoniacal; Other susceptible environments: Water, amine, dinitrogen tetroxide Highly susceptible
CuZn38Mn1.5 Notes
CuZn38Mn1.5 Hot Worked Other notes (s)=soft; (1/2 h)=half hard; (h)=hard; (xh)=extra hard; (hr) = hot rolled; (w)=soln heat-trtd; (wh)=soln heat-trtd & work hdnd; (wp)=soln heat-trtd & precip hdnd; (whp)=precip hdnd after cold-wkng; (wph)=work hdnd after precip hdng.
CuZn38Mn1.5 Standards with similar compositions
Europe: CW722R to CEN EN 12164, CW722R to CEN EN 12165, CW722R to CEN EN 12167, CW722R to CEN EN 12168, CW722R to CEN EN 12420Tradenames: CERRO HT1, DELTA HIGH TENSILE BRASS HT1, DELTA HT1, DELTA HT1 HIGH SPEED MACHINING ROD, IMI 333, MCKECHNIE 540
Modulus Metal Services
Manufacturing & Quality Services in Turkey