Skip to content
Modulus Metal

Modulus Metal

sourcing and quality

  • Home
  • About Us
  • Our Products
    • Casting
      • Sand Casting
      • Die Casting
      • Centrifugal Casting
      • Investment Casting
    • Deformation
      • Drawing
      • Extrusion
      • Forging/ Rolling
      • Sheet Metal
    • Molding
      • Blow Molding
      • Injection Molding
      • Polymer Casting
      • Polymer Extrusion
    • Machining
      • Standart Machining Process
      • Thermal
      • Sheet / Film
      • Abrasive
      • Electrical and Chemical Machining
    • Joining
      • Thermal Welding
      • Mechanical Welding
      • Fasteners
        • Screw Fasten
        • Rivets and Staples
        • Snap and Press Fit
      • Adhesives
    • Heat Treatment
      • Annealing / Normalizing
      • Case Hardening with Subsequent Hardening Operation
      • Case Hardening without Subsequent Hardening Operation
      • Hardening and Tempering
      • Solution and Age Hardening
      • Stress Relieving
    • Surface Treatment
      • Surface Coating
        • Plating and Metal Coating
        • Cladding
        • Chemical Conversion Coating
        • Polymer Powder Coating
        • Thermal Spraying
      • Polishing / Texturing / Etching
      • Surface Heat Treatment
      • Painting
    • 3D Printing
    • Powder Metallurgy
  • Quality Controls
    • Resident Engineering Services
    • Process Control
    • PPAP Control and Part Approval Process
    • Final Inspection or Pre-Shipment Controls
    • 3rd Party Operations & Containment Management
    • 8D Management
    • Loading and Unloading Inspections
    • Statistical Quality & Optimization
  • Testing Services
    • Mechanical Testing Services
    • Chemical Analysis Services
    • Metallurgical Testing
    • Non Destructive Testing Methods (NDT Testing)
    • Surface Roughness Testing
    • Paint and Coating Adhesion Testing
  • Material Grades
    • Metals and Alloys
      • Ferrous
      • Non-Ferrous
    • Polymers
  • Contact Us

Polymers

Polymers in Turkey

PLASTICS

THERMOPLASTICS

  • Acrylic
  • Polycarbonate
  • Nylon
  • Poly Vinyl Chloride (PVC)
  • Polypropylene
  • Polyethylene

THERMOSETS

  • Polyester
  • Silicone
  • Melamine
  • Polyurethane
  • Epoxy
  • Urea formaldehyde
Polymers in Turkey

USEFUL INFO

List of Plastics Standards

Show the Standards
Standard NumberStandard
EN 59:2016Glass reinforced plastics – Determination of indentation hardness by means of a Barcol hardness tester
EN ISO 60:1999Plastics – Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977)
EN ISO 61:1999Plastics – Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:1976)
EN ISO 62:2008Plastics – Determination of water absorption (ISO 62:2008)
EN ISO 75-1:2013Plastics – Determination of temperature of deflection under load – Part 1: General test method (ISO 75-1:2013)
EN ISO 75-2:2013Plastics – Determination of temperature of deflection under load – Part 2: Plastics and ebonite (ISO 75-2:2013)
EN ISO 75-3:2004Plastics – Determination of temperature of deflection under load – Part 3: High-strength thermosetting laminates (ISO 75-3:2004)
EN ISO 75-3:2004/AC:2006Plastics – Determination of temperature of deflection under load – Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
EN ISO 119:1998Plastics – Phenol-formaldehyde mouldings – Determination of free phenols – Iodometric method (ISO 119:1977)
EN ISO 120:1998Plastics – Phenol-formaldehyde mouldings – Determination of free ammonia and ammonium compounds – Colorimetric comparison method (ISO 120:1977)
EN ISO 172:1998Plastics – Phenol-formaldehyde mouldings – Detection of free ammonia (ISO 172:1978)
EN ISO 175:2010Plastics – Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
EN ISO 176:2005Plastics – Determination of loss of plasticizers – Activated carbon method (ISO 176:2005)
EN ISO 177:2017Plastics – Determination of migration of plasticizers (ISO 177:2016)
EN ISO 178:2010Plastics – Determination of flexural properties (ISO 178:2010)
EN ISO 178:2010/A1:2013Plastics – Determination of flexural properties (ISO 178:2010/Amd 1:2013)
EN ISO 179-1:2010Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN ISO 179-2:1999Plastics – Determination of Charpy impact properties – Part 2: Instrumented impact test (ISO 179-2:1997)
EN ISO 179-2:1999/A1:2012Plastics – Determination of Charpy impact properties – Part 2: Instrumented impact test – Amendment 1: Precision data (ISO 179-2:1997/Amd 1:2011)
EN ISO 180:2000Plastics – Determination of Izod impact strength (ISO 180:2000)
EN ISO 180:2000/A1:2006Plastics – Determination of Izod impact strength (ISO 180:2000)
EN ISO 180:2000/A2:2013Plastics – Determination of Izod impact strength (ISO 180:2000)
EN ISO 182-2:1999Plastics – Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures – Part 2: pH method (ISO 182-2:1990)
EN ISO 182-3:2000Plastics – Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures – Part 3: Conductometric method (ISO 182-3:1993)
EN ISO 182-4:2000Plastics – Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures – Part 4: Potentiometric method (ISO 182-4:1993)
EN ISO 291:2008Plastics – Standard atmospheres for conditioning and testing (ISO 291:2008)
EN ISO 293:2005Plastics – Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
EN ISO 294-1:1998Plastics – Injection moulding of test specimens of thermoplastic materials – Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996)
EN ISO 294-1:1998/A1:2002Plastics – Injection moulding of test specimens of thermoplastic materials – Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996/Amd. 1:2001)
EN ISO 294-2:1998Plastics – Injection moulding of test specimens of thermoplastic materials – Part 2: Small tensile bars (ISO 294-2:1996)
EN ISO 294-2:1998/A1:2005Plastics – Injection moulding of test specimens of thermoplastic materials – Part 2: Small tensile bars (ISO 294-2:1996)
EN ISO 294-3:2003Plastics – Injection moulding of test specimens of thermoplastic materials – Part 3: Small plates (ISO 294-3:2002)
EN ISO 294-4:2003Plastics – Injection moulding of test specimens of thermoplastic materials – Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
EN ISO 294-5:2013Plastics – Injection moulding of test specimens of thermoplastic materials – Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2011)
EN ISO 295:2004Plastics – Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
EN ISO 305:1999Plastics – Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds – Discoloration method (ISO 305:1990)
EN ISO 306:2013Plastics – Thermoplastic materials – Determination of Vicat softening temperature (VST) (ISO 306:2013)
EN ISO 307:2007Plastics – Polyamides – Determination of viscosity number (ISO 307:2007)
EN ISO 307:2007/A1:2013Plastics – Polyamides – Determination of viscosity number – Amendment 1: Corrections, and update to reference to JIS K 6920-2 (ISO 307:2007/Amd 1:2013)
EN ISO 308:1997Plastics – Phenolic moulding materials – Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994)
EN 438-1:2016High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (usually called laminates) – Part 1: Introduction and general information
EN 438-2:2016High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (usually called laminates) – Part 2: Determination of properties
EN 438-3:2016High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (usually called laminates) – Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
EN 438-4:2016High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (usually called laminates) – Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater
EN 438-5:2016High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (usually called laminates) – Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
EN 438-6:2016High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (usually called laminates) – Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater
EN 438-7:2005High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (Usually called Laminates) – Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
EN 438-8:2009High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (Usually called Laminates) – Part 8: Classification and specifications for design laminates
EN 438-9:2010+A1:2013High-pressure decorative laminates (HPL) – Sheets based on thermosetting resins (Usually called Laminates) – Part 9: Classification and specifications for alternative core laminates
EN ISO 472:2013Plastics – Vocabulary (ISO 472:2013)
EN 477:1995Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors – Determination of the resistance to impact of main profiles by falling mass
EN 478:1995Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors – Appearance after exposure at 150 °C – Test method
EN 479:1995Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors – Determination of heat reversion
EN ISO 483:2005Plastics – Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005)
EN ISO 489:1999Plastics – Determination of refractive index (ISO 489:1999)
EN 513:1999Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors – Determination of the resistance to artificial weathering
EN 514:2000Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors – Determination of the strength of welded corners and T-joints
EN ISO 527-1:2012Plastics – Determination of tensile properties – Part 1: General principles (ISO 527-1:2012)
EN ISO 527-2:2012Plastics – Determination of tensile properties – Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN ISO 527-3:1995Plastics – Determination of tensile properties – Part 3: Test conditions for films and sheets (ISO 527-3:1995)
EN ISO 527-3:1995/AC:2002Plastics – Determination of tensile properties – Part 3: Test conditions for films and sheets (ISO 527-3:1995)
EN ISO 527-4:1997Plastics – Determination of tensile properties – Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997)
EN ISO 527-5:2009Plastics – Determination of tensile properties – Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)
EN ISO 584:1997Plastics – Unsaturated polyester resins – Determination of reactivity at 80 °C (conventional method) (ISO 584:1982)
EN ISO 585:1999Plastics – Unplasticized cellulose acetate – Determination of moisture content (ISO 585:1990)
EN ISO 604:2003Plastics – Determination of compressive properties (ISO 604:2002)
EN ISO 844:2014Rigid cellular plastics – Determination of compression properties (ISO 844:2014)
EN ISO 845:2009Cellular plastics and rubbers – Determination of apparent density (ISO 845:2006)
EN ISO 846:1997Plastics – Evaluation of the action of microorganisms (ISO 846:1997)
EN ISO 868:2003Plastics and ebonite – Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
EN ISO 877-1:2010Plastics – Methods of exposure to solar radiation – Part 1: General guidance (ISO 877-1:2009)
EN ISO 877-2:2010Plastics – Methods of exposure to solar radiation – Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009)
EN ISO 877-3:2010Plastics – Methods of exposure to solar radiation – Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009)
EN ISO 899-1:2003Plastics – Determination of creep behaviour – Part 1: Tensile creep (ISO 899-1:2003)
EN ISO 899-1:2003/A1:2015Plastics – Determination of creep behaviour – Part 1: Tensile creep – Amendment 1 (ISO 899-1:2003/Amd 1:2015)
EN ISO 899-2:2003Plastics – Determination of creep behaviour – Part 2: Flexural creep by three-point loading (ISO 899-2:2003)
EN ISO 899-2:2003/A1:2015Plastics – Determination of creep behaviour – Part 2: Flexural creep by three-point loading – Amendment 1 (ISO 899-2:2003/Amd 1:2015)
EN ISO 1043-1:2011Plastics – Symbols and abbreviated terms – Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)
EN ISO 1043-1:2011/A1:2016Plastics – Symbols and abbreviated terms – Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011/Amd 1:2016)
EN ISO 1043-2:2011Plastics – Symbols and abbreviated terms – Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
EN ISO 1043-3:2016Plastics – Symbols and abbreviated terms – Part 3: Plasticizers (ISO 1043-3:2016)
EN ISO 1043-4:1999Plastics – Symbols and abbreviated terms – Part 4: Flame retardants (ISO 1043-4:1998)
EN ISO 1043-4:1999/A1:2016Plastics – Symbols and abbreviated terms – Part 4: Flame retardants (ISO 1043-4:1998/Amd 1:2016)
EN ISO 1060-1:1999Plastics – Homopolymer and copolymer resins of vinyl chloride – Part 1: Designation system and basis for specifications (ISO 1060-1:1998)
EN ISO 1060-2:1999Plastics – Homopolymer and copolymer resins of vinyl chloride – Part 2: Preparation of test samples and determination of properties (ISO 1060-2:1998)
EN ISO 1061:1999Plastics – Unplasticized cellulose acetate – Determination of free acidity (ISO 1061:1990)
EN ISO 1110:1997Plastics – Polyamides – Accelerated conditioning of test specimens (ISO 1110:1995)
EN 1122:2001Plastics – Determination of cadmium – Wet decomposition method
EN ISO 1133-1:2011Plastics – Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics – Part 1: Standard method (ISO 1133-1:2011)
EN ISO 1133-2:2011Plastics – Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics – Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
EN ISO 1158:1998Plastics – Vinyl chloride homopolymers and copolymers – Determination of chlorine content (ISO 1158:1998)
EN ISO 1163-1:1999Plastics – Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 1163-1:1995)
EN ISO 1163-2:1999Plastics – Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995)
EN ISO 1172:1998Textile-glass-reinforced plastics – Prepregs, moulding compounds and laminates – Determination of the textile-glass and mineral-filler content – Calcination methods (ISO 1172:1996)
EN ISO 1183-1:2012Plastics – Methods for determining the density of non-cellular plastics – Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
EN ISO 1183-2:2004Plastics – Methods for determining the density of non-cellular plastics – Part 2: Density gradient column method (ISO 1183-2:2004)
EN ISO 1183-3:1999Plastics – Methods for determining the density of non-cellular plastics – Part 3: Gas pyknometer method (ISO 1183-3:1999)
EN ISO 1264:1997Plastics – Homopolymer and copolymer resins of vinyl chloride – Determination of pH of aqueous extract (ISO 1264:1980)
EN ISO 1265:2007Plastics – Poly(vinyl chloride) resins – Determination of number of impurities and foreign particles (ISO 1265:2007)
EN ISO 1269:2006Plastics – Homopolymer and copolymer resins of vinyl chloride – Determination of volatile matter (including water) (ISO 1269:2006)
EN ISO 1598:1999Plastics – Cellulose acetate – Determination of insoluble particles (ISO 1598:1990)
EN ISO 1599:1999Plastics – Cellulose acetate – Determination of viscosity loss on moulding (ISO 1599:1990)
EN ISO 1600:1999Plastics – Cellulose acetate – Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990)
EN ISO 1622-1:2012Plastics – Polystyrene (PS) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 1622-1:2012)
EN ISO 1622-2:1999Plastics – Polystyrene (PS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995)
EN ISO 1624:2001Plastics – Vinyl choride homopolymer and copolymer resins – Sieve analysis in water (ISO 1624:2001)
EN ISO 1628-1:2009Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles (ISO 1628-1:2009)
EN ISO 1628-1:2009/A1:2012Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 1: General principles – Amendment 1 (ISO 1628-1:2009/Amd 1:2012)
EN ISO 1628-2:1998Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998)
EN ISO 1628-3:2010Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 3: Polyethylenes and polypropylenes (ISO 1628-3:2010)
EN ISO 1628-5:2015Plastics – Determination of the viscosity of polymers in dilute solution using capillary viscometers – Part 5: Thermoplastic polyester (TP) homopolymers and copolymers (ISO 1628-5:1998)
EN ISO 1675:1998Plastics – Liquid resins – Determination of density by the pyknometer method (ISO 1675:1985)
EN 1778:1999Characteristic values for welded thermoplastics constructions – Determination of allowable stresses and moduli for design of thermoplastics equipment
EN ISO 1798:2008Flexible cellular polymeric materials – Determination of tensile strength and elongation at break (ISO 1798:2008)
EN 1842:1997Plastics – Thermoset moulding compounds (SMC – BMC) – Determination of compression moulding shrinkage
EN ISO 1856:2000Flexible cellular polymeric materials – Determination of compression set (ISO 1856:2000)
EN ISO 1856:2000/A1:2007Flexible cellular polymeric materials – Determination of compression set – Amendment 1 (ISO 1856:2000/Amd 1:2007)
EN ISO 1872-2:2007Plastics – Polyethylene (PE) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)
EN ISO 1873-2:2007Plastics – Polypropylene (PP) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
EN ISO 1874-2:2012Plastics – Polyamide (PA) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
EN ISO 1889:2009Reinforcement yarns – Determination of linear density (ISO 1889:2009)
EN ISO 1890:2009Reinforcement yarns – Determination of twist (ISO 1890:2009)
EN ISO 1923:1995Cellular plastics and rubbers – Determination of linear dimensions (ISO 1923:1981)
EN ISO 2039-1:2003Plastics – Determination of hardness – Part 1: Ball indentation method (ISO 2039-1:2001)
EN ISO 2039-2:1999Plastics – Determination of hardness – Part 2: Rockwell hardness (ISO 2039-2:1987)
EN ISO 2078:1994Textile glass – Yarns – Designation (ISO 2078:1993)
EN ISO 2078:1994/A1:2015Textile glass – Yarns – Designation – Amendment 1 (ISO 2078:1993/Amd 1:2015)
EN ISO 2114:2000Plastics (polyester resins) and paints and varnishes (binders) – Determination of partial acid value and total acid value (ISO 2114:2000)
EN ISO 2114:2000/AC:2005Plastics (polyester resins) and paints and varnishes (binders) – Determination of partial acid value and total acid value (ISO 2114:2000)
EN ISO 2439:2008Flexible cellular polymeric materials – Determination of hardness (indentation technique) (ISO 2439:2008)
EN ISO 2440:1999Flexible and rigid cellular polymeric materials – Accelerated ageing tests (ISO 2440:1997)
EN ISO 2440:1999/A1:2010Flexible and rigid cellular polymeric materials – Accelerated ageing tests – Amendment 1 (ISO 2440:1997/Amd 1:2010)
EN ISO 2440:1999/A2:2014Flexible and rigid cellular polymeric materials – Accelerated ageing tests – Amendment 2 (ISO 2440:1997/AMD 2:2014)
EN ISO 2535:2002Plastics – Unsaturated polyester resins – Measurement of gel time at ambient temperature (ISO 2535:2001)
EN ISO 2554:1998Plastics – Unsaturated polyester resins – Determination of hydroxyl value (ISO 2554:1997)
EN ISO 2555:1999Plastics – Resins in the liquid state or as emulsions or dispersions – Determination of apparent viscosity by the Brookfield Test method (ISO 2555:1989)
EN ISO 2556:2000Plastics – Determination of the gas transmission rate of films and thin sheets under atmospheric pressure – Manometric method (ISO 2556:1974)
EN ISO 2578:1998Plastics – Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)
EN ISO 2580-2:2003Plastics – Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003)
EN ISO 2818:1996Plastics – Preparation of test specimens by machining (ISO 2818:1994)
EN ISO 2897-2:2003Plastics – Impact-resistant polystyrene (PS-I) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003)
EN ISO 2898-1:1999Plastics – Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 2898-1:1996)
EN ISO 2898-2:2008Plastics – Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008)
EN ISO 3001:1999Plastics – Epoxy compounds – Determination of epoxy equivalent (ISO 3001:1999)
EN ISO 3146:2000Plastics – Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)
EN ISO 3146:2000/AC:2003Plastics – Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)
EN ISO 3167:2014Plastics – Multipurpose test specimens (ISO 3167:2014)
EN ISO 3344:1997Reinforcement products – Determination of moisture content (ISO 3344:1997)
EN ISO 3385:2014Flexible cellular polymeric materials – Determination of fatigue by constant-load pounding (ISO 3385:2014)
EN ISO 3386-1:1997Polymeric materials, cellular flexible – Determination of stress-strain characteristic in compression – Part 1: Low-density materials (ISO 3386-1:1986)
EN ISO 3386-1:1997/A1:2010Polymeric materials, cellular flexible – Determination of stress-strain characteristics in compression – Part 1: Low-density materials – Amendment 1 (ISO 3386-1:1986/Amd 1:2010)
EN ISO 3386-2:1998Flexible cellular polymeric materials – Determination of stress-strain characteristics in compression – Part 2: High-density materials (ISO 3386-2:1997)
EN ISO 3386-2:1998/A1:2010Flexible cellular polymeric materials – Determination of stress-strain characteristics in compression – Part 2: High-density materials – Amendment 1 (ISO 3386-2:1997/Amd 1:2010)
EN ISO 3451-1:2008Plastics – Determination of ash – Part 1: General methods (ISO 3451-1:2008)
EN ISO 3451-4:2000Plastics – Determination of ash – Part 4: Polyamides (ISO 3451-4:1998)
EN ISO 3451-5:2002Plastics – Determination of ash – Part 5: Poly(vinyl chloride) (ISO 3451-5:2002)
EN ISO 3521:1999Plastics – Unsaturated polyester and epoxy resins – Determination of overall volume shrinkage (ISO 3521:1997)
EN ISO 3582:2000Flexible cellular polymeric materials – Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame (ISO 3582:2000)
EN ISO 3582:2000/A1:2007Flexible cellular polymeric materials – Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame – Amendment 1 (ISO 3582:2000/Amd 1:2007)
EN ISO 3671:1998Plastics – Aminoplastic moulding materials – Determination of volatile matter (ISO 3671:1976)
EN ISO 3672-1:2001Plastics – Unsaturated-polyester resins (UP-R) – Part 1: Designation system (ISO 3672-1:2000)
EN ISO 3672-2:2001Plastics – Unsaturated-polyester resins (UP-R) – Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000)
EN ISO 3673-1:1999Plastics – Epoxy resins – Part 1: Designation (ISO 3673-1:1996)
EN ISO 3673-2:2012Plastics – Epoxy resins – Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
EN ISO 3915:1999Plastics – Measurement of resistivity of conductive plastics (ISO 3915:1981)
EN ISO 4577:1999Plastics – Polypropylene and propylene-copolymers – Determination of thermal oxidative stability in air – Oven method (ISO 4577:1983)
EN ISO 4589-1:1999Plastics – Determination of burning behaviour by oxygen index – Part 1: Guidance (ISO 4589-1:1996)
EN ISO 4589-2:1999Plastics – Determination of burning behaviour by oxygen index – Part 2: Ambient-temperature test (ISO 4589-2:1996)
EN ISO 4589-2:1999/A1:2006Plastics – Determination of burning behaviour by oxygen index – Part 2: Ambient-temperature test (ISO 4589-2:1996/Amd 1:2005)
EN ISO 4589-3:1996Plastics – Determination of burning behaviour by oxygen index – Part 3: Elevated-temperature test (ISO 4589-3:1996)
EN ISO 4590:2016Rigid cellular plastics – Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
EN ISO 4597-1:2008Plastics – Hardeners and accelerators for epoxy resins – Part 1: Designation (ISO 4597-1:2005)
EN ISO 4608:1998Plastics – Homopolymer and copolymer resins of vinyl chloride for general use – Determination of plasticizer absorption at room temperature (ISO 4608:1998)
EN ISO 4610:2001Plastics – Vinyl chloride homopolymer and copolymer resins – Sieve analysis using air-jet sieve apparatus (ISO 4610:2001)
EN ISO 4611:2010Plastics – Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010)
EN ISO 4612:1999Plastics – Preparation of PVC pastes for test purposes – Planetary-mixer method (ISO 4612:1999)
EN ISO 4613-1:1999Plastics – Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials – Part 1: Designation and specification (ISO 4613-1:1993)
EN ISO 4613-2:1995Plastics – Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995)
EN ISO 4613-2:1995/A1:2004Plastics – Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties – Amendment 1 (ISO 4613-2:1995/Amd 1:2004)
EN ISO 4614:1999Plastics – Melamine-formaldehyde mouldings – Determination of extractable formaldehyde (ISO 4614:1977)
EN ISO 4615:1999Plastics – Unsaturated polyesters and epoxide resins – Determination of total chlorine content (ISO 4615:1979)
EN ISO 4638:1995Polymeric materials, cellular flexible – Determination of air flow permeability (ISO 4638:1984)
EN ISO 4651:1995Cellular rubbers and plastics – Determination of dynamic cushioning performance (ISO 4651:1988)
EN ISO 4651:1995/A1:2008Cellular rubbers and plastics – Determination of dynamic cushioning performance – Amendment 1 (ISO 4651:1988/Amd 1:2006)
EN ISO 4892-1:2016Plastics – Methods of exposure to laboratory light sources – Part 1: General guidance (ISO 4892-1:2016)
EN ISO 4892-2:2013Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN ISO 4892-3:2016Plastics – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps (ISO 4892-3:2016)
EN ISO 4894-2:1999Plastics – Styrene/acrylonitrile (SAN) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995)
EN ISO 4895:2014Plastics – Liquid epoxy resins – Determination of tendency to crystallize (ISO 4895:2014)
EN ISO 5659-2:2012Plastics – Smoke generation – Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2012)
EN ISO 5999:2013Flexible cellular polymeric materials – Polyurethane foam for load-bearing applications excluding carpet underlay – Specification (ISO 5999:2013)
EN ISO 6186:1998Plastics – Determination of pourability (ISO 6186:1998)
EN ISO 6383-1:2015Plastics – Film and sheeting – Determination of tear resistance – Part 1: Trouser tear method (ISO 6383-1:2015)
EN ISO 6401:2008Plastics – Poly(vinyl chloride) – Determination of residual vinyl chloride monomer – Gas-chromatographic method (ISO 6401:2008)
EN ISO 6402-2:2003Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination
EN ISO 6427:2014Plastics – Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013)
EN ISO 6383-2:2004Plastics – Film and sheeting – Determination of tear resistance – Part 2: Elmendorf method (ISO 6383-2:1983)
EN ISO 6603-1:2000Plastics – Determination of puncture impact behaviour of rigid plastics – Part 1: Non-instrumented impact testing (ISO 6603-1:2000)
EN ISO 6603-2:2000Plastics – Determination of puncture impact behaviour of rigid plastics – Part 2: Instrumented puncture test (ISO 6603-2:2000)
EN ISO 6721-1:2011Plastics – Determination of dynamic mechanical properties – Part 1: General principles (ISO 6721-1:2011)
EN ISO 6721-2:2008Plastics – Determination of dynamic mechanical properties – Part 2: Torsion-pendulum method (ISO 6721-2:2008)
EN ISO 6721-3:1996Plastics – Determination of dynamic mechanical properties – Part 3: Flexural vibration – Resonance-curve method (ISO 6721-3:1994, including Technical Corrigendum 1: 1995)
EN ISO 7214:2012Cellular plastics – Polyethylene – Methods of test (ISO 7214:2012)
EN ISO 7231:2010Polymeric materials, cellular, flexible – Determination of air flow value at constant pressure-drop (ISO 7231:2010)
EN ISO 7327:1997Plastics – Hardeners and accelerators for epoxide resins – Determination of free acid in acid anhydride (ISO 7327:1994)
EN ISO 7391-1:2006Plastics – Polycarbonate (PC) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 7391-1:2006)
EN ISO 7391-2:2006Plastics – Polycarbonate (PC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
EN ISO 7765-1:2004Plastics film and sheeting – Determination of impact resistance by the free-falling dart method – Part 1: Staircase methods (ISO 7765-1:1988)
EN ISO 7792-1:2012Plastics – Thermoplastic polyester (TP) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 7792-1:2012)
EN ISO 7792-2:2012Plastics – Thermoplastic polyester (TP) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
EN ISO 7808:1998Plastics – Thermosetting moulding materials – Determination of transfer flow (ISO 7808:1992)
EN ISO 7822:1999Textile glass reinforced plastics – Determination of void content – Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990)
EN ISO 7823-1:2003Plastics – Poly(methyl methacrylate) sheets – Types, dimensions and characteristics – Part 1: Cast sheets (ISO 7823-1:2003)
EN ISO 7823-2:2003Plastics – Poly(methyl methacrylate) sheets – Types, dimensions and characteristics – Part 2: Extruded sheets (ISO 7823-2:2003)
EN ISO 7823-3:2007Plastics – Poly(methyl methacrylate) sheets – Types, dimensions and characteristics – Part 3: Continuous cast sheets (ISO 7823-3:2007)
EN ISO 8067:2008Flexible cellular polymeric materials – Determination of tear strength (ISO 8067:2008)
EN ISO 8256:2004Plastics – Determination of tensile-impact strength (ISO 8256:2004)
EN ISO 8257-1:2006Plastics – Poly(methyl methacrylate) (PMMA) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 8257-1:1998)
EN ISO 8257-2:2006Plastics – Poly(methyl methacrylate) (PMMA) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001)
EN ISO 8295:2004Plastics – Film and sheeting – Determination of the coefficients of friction (ISO 8295:1995)
EN ISO 8307:2007Flexible cellular polymeric materials – Determination of resilience by ball rebound (ISO 8307:2007)
EN ISO 8619:2004Plastics – Phenolic resin powder – Determination of flow distance on a heated glass plate (ISO 8619:2003)
EN ISO 8974:2002Plastics – Phenolic resins – Determination of residual phenol content by gas chromatography (ISO 8974:2002)
EN ISO 8975:1995Plastics – Phenolic resins – Determination of pH (ISO 8975:1989)
EN ISO 8985:1998Plastics – Ethylene/vinyl acetate copolymer (EVAC) thermoplastics – Determination of vinyl acetate content (ISO 8985:1998)
EN ISO 8986-1:2009Plastics – Polybutene-1 (PB-1) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 8986-1:2009)
EN ISO 8986-2:2009Plastics – Polybutene-1 (PB-1) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
EN ISO 8987:2005Plastics – Phenolic resins – Determination of reactivity on a B-transformation test plate (ISO 8987:2005)
EN ISO 8988:2006Plastics – Phenolic resins – Determination of hexamethylenetetramine content – Kjeldahl method, perchloric acid method and hydrochloric acid method (ISO 8988:2006)
EN ISO 8989:1998Plastics – Liquid phenolic resins – Determination of water miscibility (ISO 8989:1995)
EN ISO 9054:1999Cellular plastics, rigid – Test methods for self-skinned, high-density materials (ISO 9054:1990)
EN ISO 9163:2005Textile glass – Rovings – Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
EN ISO 9396:2000Plastics – Phenolic resins – Determination of the gel time at a given temperature using automatic apparatus (ISO 9396:1997)
EN ISO 9702:1998Plastics – Amine epoxide hardeners – Determination of primary, secondary and tertiary amine group nitrogen content (ISO 9702:1996)
EN ISO 9771:1997Plastics – Phenolic resins – Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995)
EN ISO 9773:1998Plastics – Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998)
EN ISO 9773:1998/A1:2003Plastics – Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source – Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)
EN ISO 9944:1995Plastics – Phenolic resins – Determination of electrical conductivity of resin extracts (ISO 9944:1990)
EN ISO 9988-1:2006Plastics – Polyoxymethylene (POM) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 9988-1:2004)
EN ISO 9988-2:2015Plastics – Polyoxymethylene (POM) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
EN ISO 10066:1997Flexible cellular polymeric materials – Determination of creep in compression (ISO 10066:1991)
EN ISO 10082:1999Plastics – Phenolic resins – Classification and test methods (ISO 10082:1999)
EN ISO 10093:1998Plastics – Fire tests – Standard ignition sources (ISO 10093:1998)
EN ISO 10350-1:2008Plastics – Acquisition and presentation of comparable single-point data – Part 1: Moulding materials (ISO 10350-1:2007)
EN ISO 10350-1:2008/A1:2014Plastics – Acquisition and presentation of comparable single-point data – Part 1: Moulding materials (ISO 10350-1:2007/Amd 1:2014)
EN ISO 10350-2:2011Plastics – Acquisition and presentation of comparable single-point data – Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
EN ISO 10352:2010Fibre-reinforced plastics – Moulding compounds and prepregs – Determination of mass per unit area (ISO 10352:2010)
EN ISO 10366-2:2003Plastics – Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)
EN ISO 10548:2003Carbon fibre – Determination of size content (ISO 10548:2002)
EN ISO 10548:2003/AC:2009Carbon fibre – Determination of size content (ISO 10548:2002/Cor 1:2008)
EN ISO 10618:2004Carbon fibre – Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004)
EN ISO 10724-1:2001Plastics – Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) – Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998)
EN ISO 10724-2:2000Plastics – Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) – Part 2: Small plates (ISO 10724-2:1998)
EN ISO 11248:1999Plastics – Thermosetting moulding materials – Evaluation of short-term performance at elevated temperatures (ISO 11248:1993)
EN ISO 11337:2010Plastics – Polyamides – Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO 11337:2010)
EN ISO 11357-1:2016Plastics – Differential scanning calorimetry (DSC) – Part 1: General principles (ISO 11357-1:2016)
EN ISO 11357-2:2014Plastics – Differential scanning calorimetry (DSC) – Part 2: Determination of glass transition temperature and glass transition step height (ISO 11357-2:2013)
EN ISO 11357-3:2013Plastics – Differential scanning calorimetry (DSC) – Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011)
EN ISO 11357-4:2014Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
EN ISO 11357-5:2014Plastics – Differential scanning calorimetry (DSC) – Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
EN ISO 11357-6:2013Plastics – Differential scanning calorimetry (DSC) – Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008)
EN ISO 11357-7:2015Plastics – Differential scanning calorimetry (DSC) – Part 7: Determination of crystallization kinetics (ISO 11357-7:2015)
EN ISO 11358-1:2014Plastics – Thermogravimetry (TG) of polymers – Part 1: General principles (ISO 11358-1:2014)
EN ISO 11401:1998Plastics – Phenolic resins – Separation by liquid chromatography (ISO 11401:1993)
EN ISO 11402:2005Phenolic, amino and condensation resins – Determination of free-formaldehyde content (ISO 11402:2004)
EN ISO 11402:2005/AC:2006Phenolic, amino and condensation resins – Determination of free-formaldehyde content (ISO 11402:2004)
EN ISO 11403-1:2014Plastics – Acquisition and presentation of comparable multipoint data – Part 1: Mechanical properties (ISO 11403-1:2014)
EN ISO 11403-2:2012Plastics – Acquisition and presentation of comparable multipoint data – Part 2: Thermal and processing properties (ISO 11403-2:2012)
EN ISO 11403-3:2014Plastics – Acquisition and presentation of comparable multipoint data – Part 3: Environmental influences on properties (ISO 11403-3:2014)
EN ISO 11409:1998Plastics – Phenolic resins – Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993)
EN ISO 11468:1999Plastics – Preparation of PVC pastes for test purposes – Dissolver method (ISO 11468:1997)
EN ISO 11469:2016Plastics – Generic identification and marking of plastics products (ISO 11469:2016)
EN ISO 11501:2004Plastics – Film and sheeting – Determination of dimensional change on heating (ISO 11501:1995)
EN ISO 11502:2005Plastics – Film and sheeting – Determination of blocking resistance (ISO 11502:1995)
EN ISO 11542-1:2001Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 11542-1:2001)
EN ISO 11542-2:1998Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998)
EN ISO 11542-2:1998/AC:2008Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998/Cor 1:2007)
EN ISO 11667:1999Fibre-reinforced plastics – Moulding compounds and prepregs – Determination of resin, reinforced-fibre and mineral-filler content – Dissolution methods (ISO 11667:1997)
EN ISO 11833-1:2012Plastics – Unplasticized poly(vinyl chloride) sheets – Types, dimensions and characteristics – Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012)
EN ISO 11833-2:2006Plastics – Unplasticized poly(vinyl chloride) sheets – Types, dimensions and characteristics – Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998)
EN ISO 11963:2012Plastics – Polycarbonate sheets – Types, dimensions and characteristics (ISO 11963:2012)
EN ISO 12017:1996Plastics – Poly(methyl methacrylate) double- and triple-skin sheets – Test methods (ISO 12017:1995)
EN ISO 12058-1:2002Plastics – Determination of viscosity using a falling-ball viscometer – Part 1: Inclined-tube method (ISO 12058-1:1997)
EN ISO 12058-1:2002/AC:2004Plastics – Determination of viscosity using a falling-ball viscometer – Part 1: Inclined-tube method (ISO 12058-1:1997)
EN ISO 12086-1:2006Plastics – Fluoropolymer dispersions and moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 12086-1:2006)
EN ISO 12086-1:2006/AC:2007Plastics – Fluoropolymer dispersions and moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 12086-1:2006/Cor 1:2006)
EN ISO 12086-2:2006Plastics – Fluoropolymer dispersions and moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:2006)
EN ISO 12086-2:2006/AC:2009Plastics – Fluoropolymer dispersions and moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:2006/Cor 1:2006)
EN ISO 12114:1997Fibre-reinforced plastics – Thermosetting moulding compounds and prepregs – Determination of cure characteristics (ISO 12114:1997)
EN ISO 12115:1997Fibre-reinforced plastics – Thermosetting moulding compounds and prepregs – Determination of flowability, maturation and shelf life (ISO 12115:1997)
EN 12575:1998Plastics – Thermoset moulding compounds – Determination of the degree of fibre wet out in SMC
EN 12576:1998Plastics – Fibre reinforced composites – Preparation of compression moulded test plates of SMC, BMC and DMC
EN 12608-1:2016Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors – Classification, requirements and test methods – Part 1: Non-coated PVC-U profiles with light coloured surfaces
EN 12613:2009Plastics warning devices for underground cables and pipelines with visual characteristics
EN 12654-1:1998Textile glass – Yarns – Part 1: Designation
EN 12654-2:1998Textile glass – Yarns – Part 2: Methods of test and general specifications
EN 12654-3:1998Textile glass – Yarns – Part 3: General requirements for general applications
EN 12814-1:1999Testing of welded joints of thermoplastics semi-finished products – Part 1: Bend test
EN 12814-1:1999/AC:2003Testing of welded joints of thermoplastics semi-finished products – Part 1: Bend test
EN 12814-2:2000Testing of welded joints of thermoplastics semi-finished products – Part 2: Tensile test
EN 12814-3:2014Testing of welded joints in thermoplastics semi-finished products – Part 3: Tensile creep test
EN 12814-4:2001Testing of welded joints of thermoplastics semi-finished products – Part 4: Peel test
EN 12814-5:2000Testing of welded joints of thermoplastics semi-finished products – Part 5: Macroscopic examination
EN 12814-6:2000Testing of welded joints of thermoplastics semi-finished products – Part 6: Low temperature tensile test
EN 12814-7:2002Testing of welded joints of thermoplastics semi-finished products – Part 7: Tensile test with waisted test specimens
EN 12814-8:2001Testing of welded joints of thermoplastics semi-finished products – Part 8: Requirements
EN 12814-8:2001/AC:2003Testing of welded joints of thermoplastics semi-finished products – Part 8: Requirements
EN 12943:1999Filler materials for thermoplastics – Scope, designation, requirements, tests
EN 12971-1:1999Reinforcements – Specification for textile glass chopped strands – Part 1: Designation
EN 12971-2:1999Reinforcements – Specification for textile glass chopped strands – Part 2: Test methods and general requirements
EN 12971-3:1999Reinforcements – Specification for textile glass chopped strands – Part 3: Specific requirements
EN ISO 13000-1:2005Plastics – Polytetrafluoroethylene (PTFE) semi-finished products – Part 1: Requirements and designation (ISO 13000-1:2005)
EN ISO 13000-2:2005Plastics – Polytetrafluoroethylene (PTFE) semi-finished products – Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)
EN ISO 13002:1998Carbon fibre – Designation system for filament yarns (ISO 13002:1998)
EN 13003-1:1999Para-aramid fibre filament yarns – Part 1: Designation
EN 13003-2:1999Para-aramid fibre filament yarns – Part 2: Methods of test and general specifications
EN 13003-3:1999Para-aramid fibre filament yarns – Part 3: Technical specifications
EN 13067:2012Plastics welding personnel – Qualification testing of welders – Thermoplastics welded assemblies
EN 13100-1:1999Non destructive testing of welded joints of thermoplastics semi-finished products – Part 1: Visual examination
EN 13100-2:2004Non-destructive testing of welded joints in thermoplastics semi-finished products – Part 2: X-ray radiographic testing
EN 13100-3:2004Non destructive testing of welded joints in thermoplastics semi-finished products – Part 3: Ultrasonic testing
EN 13100-4:2012Non destructive testing of welded joints of thermoplastics semifinished products – Part 4: High voltage testing
EN 13206:2017Covering thermoplastic films for use in agriculture and horticulture
EN 13207:2001Silage thermoplastic films
EN 13245-1:2010Plastics – Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications – Part 1: Designation of PVC-U profiles
EN 13245-2:2008Plastics – Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications – Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
EN 13245-2:2008/AC:2009Plastics – Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications – Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
EN 13245-3:2010Plastics – Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications – Part 3: Designation of PVC-UE profiles
EN 13417-1:2001Reinforcement – Specifications for woven fabrics – Part 1: Designation
EN 13417-2:2001Reinforcement – Specifications for woven fabrics – Part 2: Methods of test and general requirements
EN 13417-3:2001Reinforcement – Specifications for woven fabrics – Part 3: Specific requirements
EN 13421:2006Plastics – Thermoset moulding compounds – Composites and reinforcement fibres – Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
EN ISO 13468-1:1996Plastics – Determination of total luminous transmittance of transparent materials – Part 1: Single-beam instrument (ISO 13468-1:1996)
EN ISO 13468-2:2006Plastics – Determination of the total luminous transmittance of transparent materials – Part 2: Double-beam instrument (ISO 13468-2:1999)
EN 13473-1:2001Reinforcement – Specifications for multi-axial multi-ply fabrics – Part 1: Designation
EN 13473-2:2001Reinforcement – Specifications for multi-axial multi-ply fabrics – Part 2: Methods of test and general requirements
EN 13473-3:2001Reinforcement – Specifications for multi-axial multi-ply fabrics – Part 3: Specific requirements
EN 13655:2002Plastics – Mulching thermoplastic films for use in agriculture and horticulture
EN 13677-1:2003Reinforced thermoplastic moulding compounds – Specification for GMT – Part 1: Designation
EN 13677-2:2003Reinforced thermoplastic moulding compounds – Specification for GMT – Part 2: Methods of test and general requirements
EN 13677-3:2003Reinforced thermoplastic moulding compounds – Specification for GMT – Part 3: Specific requirements
EN 13705:2004Welding of thermoplastics – Machines and equipment for hot gas welding (including extrusion welding)
EN 13706-1:2002Reinforced plastics composites – Specifications for pultruded profiles – Part 1: Designation
EN 13706-2:2002Reinforced plastics composites – Specifications for pultruded profiles – Part 2: Methods of test and general requirements
EN 13706-3:2002Reinforced plastics composites – Specifications for pultruded profiles – Part 3: Specific requirements
EN ISO 13802:2015Plastics – Verification of pendulum impact-testing machines – Charpy, Izod and tensile impact-testing (ISO 13802:2015)
EN ISO 13894-1:2015High-pressure decorative laminates – Composite elements – Part 1: Test methods (ISO 13894-1:2000)
EN ISO 13894-2:2015High-pressure decorative laminates – Composite elements – Part 2 : Specifications for composite elements with wood-based substrates for interior use (ISO 13894-2:2005)
EN ISO 13927:2015Plastics – Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015)
EN 14118-1:2003Reinforcement – Specifications for textile glass mats (chopped strand and continuous filament mats) – Part 1: Designation
EN 14118-2:2003Reinforcement – Specifications for textile glass mats (chopped strand and continuous filament mats) – Part 2: Methods of test and general requirements
EN 14118-3:2003Reinforcement – Specifications for textile glass mats (chopped strand and continuous filament mats) – Part 3: Specific requirements
EN 14020-1:2002Reinforcements – Specification for textile glass rovings – Part 1: Designation
EN 14020-2:2002Reinforcements – Specification for textile glass rovings – Part 2: Methods of test and general requirements
EN 14020-3:2002Reinforcements – Specification for textile glass rovings – Part 3: Specific requirements
EN ISO 14125:1998Fibre-reinforced plastic composites – Determination of flexural properties (ISO 14125:1998)
EN ISO 14125:1998/AC:2002Fibre-reinforced plastic composites – Determination of flexural properties (ISO 14125:1998/Cor.1:2001)
EN ISO 14125:1998/A1:2011Fibre-reinforced plastic composites – Determination of flexural properties – Amendment 1 (ISO 14125:1998/Amd 1:2011)
EN ISO 14126:1999Fibre-reinforced plastic composites – Determination of compressive properties in the in-plane direction (ISO 14126:1999)
EN ISO 14126:1999/AC:2002Fibre-reinforced plastic composites – Determination of compressive properties in the in-plane direction (ISO 14126:1999/Cor.1:2001)
EN ISO 14129:1997Fibre-reinforced plastic composites – Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45° tension test method (ISO 14129:1997)
EN ISO 14130:1997Fibre-reinforced plastic composites – Determination of apparent interlaminar shear strength by short-beam method (ISO 14130:1997)
EN 14447:2005Fibre reinforced plastics – Glass mat reinforced thermoplastics (GMT) – Determination of flowability and solidification
EN ISO 14526-1:1999Plastics – Phenolic powder moulding compounds (PF-PMCs) – Part 1: Designation system and basis for specifications (ISO 14526-1:1999)
EN ISO 14526-2:1999Plastics – Phenolic powder moulding compounds (PF-PMCs) – Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999)
EN ISO 14526-3:1999Plastics – Phenolic powder moulding compounds (PF-PMCs) – Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999)
EN ISO 14527-1:1999Plastics – Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) – Part 1: Designation system and basis for specifications (ISO 14527-1:1999)
EN ISO 14527-2:1999Plastics – Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF-MF-PMCs) – Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999)
EN ISO 14527-3:1999Plastics – Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) – Part 3: Requirements for selected moulding compounds (ISO 14527-3:1999)
EN ISO 14528-1:1999Plastics – Melamine-formaldehyde powder moulding compounds (MF-PMCs) – Part 1: Designation system and basis for specifications (ISO 14528-1:1999)
EN ISO 14528-2:1999Plastics – Melamine-formaldehyde powder moulding compounds (MF-PMCs) – Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999)
EN ISO 14528-3:1999Plastics – Melamine-formaldehyde powder moulding compounds (MF-PMCs) – Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999)
EN ISO 14529-1:1999Plastics – Melamine/phenolic powder moulding compounds (MP-PMCs) – Part 1: Designation system and basis for specifications (ISO 14529-1:1999)
EN ISO 14529-2:1999Plastics – Melamine/phenolic powder moulding compounds (MP-PMCs) – Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999)
EN ISO 14529-3:1999Plastics – Melamine/phenolic powder moulding compounds (MP-PMCs) – Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999)
EN ISO 14530-1:1999Plastics – Unsaturated-polyester powder moulding compounds (UP-PMCs) – Part 1: Designation system and basis for specifications (ISO 14530-1:1999)
EN ISO 14530-2:1999Plastics – Unsaturated-polyester powder moulding compounds (UP-PMCs) – Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999)
EN ISO 14530-3:1999Plastics – Unsaturated-polyester powder moulding compounds (UP-PMCs) – Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999)
EN 14598-1:2005Reinforced thermosetting moulding compounds – Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) – Part 1: Designation
EN 14598-2:2005Reinforced thermosetting moulding compounds – Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) – Part 2: Methods of test and general requirements
EN 14598-2:2005/AC:2006Reinforced thermosetting moulding compounds – Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) – Part 2: Methods of test and general requirements
EN 14598-3:2005Reinforced thermosetting moulding compounds – Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) – Part 3: Specific requirements
EN ISO 14616:2004Plastics – Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures – Determination of shrinkage stress and contraction stress (ISO 14616:1997)
EN ISO 14631:1999Extruded sheets of impact-modified polystyrene (PS-I) – Requirements and test methods (ISO 14631:1999)
EN ISO 14632:1998Extruded sheets of polyethylene (PE-HD) – Requirements and test methods (ISO 14632:1998)
EN ISO 14663-1:2006Plastics – Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 14663-1:1999)
EN ISO 14663-2:2006Plastics – Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
EN 14728:2005Imperfections in thermoplastic welds – Classification
EN ISO 14851:2004Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium – Method by measuring the oxygen demand in a closed respirometer (ISO 14851:1999)
EN ISO 14852:2004Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium – Method by analysis of evolved carbon dioxide (ISO 14852:1999)
EN ISO 14855-1:2012Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide – Part 1: General method (ISO 14855-1:2012)
EN ISO 14855-2:2009Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide – Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test (ISO 1
EN ISO 14896:2009Plastics – Polyurethane raw materials – Determination of isocyanate content (ISO 14896:2009)
EN ISO 14910-1:2013Plastics – Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion – Part 1: Designation system and basis for specification (ISO 14910-1:2013)
EN ISO 14910-2:2013Plastics – Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion – Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013)
EN 14932:2006Plastics – Stretch thermoplastic films for wrapping bales – Requirements and test methods
EN 14987:2006Plastics – Evaluation of disposability in waste water treatment plants – Test scheme for final acceptance and specifications
EN 14995:2006Plastics – Evaluation of compostability – Test scheme and specifications
EN ISO 15013:2007Plastics – Extruded sheets of polypropylene (PP) – Requirements and test methods (ISO 15013:2007)
EN ISO 15015:2011Plastics – Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) – Requirements and test methods (ISO 15015:2011)
EN ISO 15023-1:2006Plastics – Poly(vinyl alcohol) (PVAL) materials – Part 1: Designation system and basis for specifications (ISO 15023-1:2001)
EN ISO 15023-2:2006Plastics – Poly(vinyl alcohol) (PVAL) materials – Part 2: Determination of properties (ISO 15023-2:2003)
EN ISO 15103-2:2007Plastics – Poly(phenylene ether) (PPE) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007)
EN ISO 15106-1:2005Plastics – Film and sheeting – Determination of water vapour transmission rate – Part 1: Humidity detection sensor method (ISO 15106-1:2003)
EN ISO 15106-2:2005Plastics – Film and sheeting – Determination of water vapour transmission rate – Part 2: Infrared detection sensor method (ISO 15106-2:2003)
EN ISO 15106-3:2005Plastics – Film and sheeting – Determination of water vapour transmission rate – Part 3: Electrolytic detection sensor method (ISO 15106-3:2003)
EN ISO 15252-1:1999Plastics – Epoxy powder moulding compounds (EP-PMCs) – Part 1: Designation system and basis for specifications (ISO 15252-1:1999)
EN ISO 15252-2:1999Plastics – Epoxy powder moulding compounds (EP-PMCs) – Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999)
EN ISO 15252-3:1999Plastics – Epoxy powder moulding compounds (EP-PMCs) – Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999)
EN ISO 15310:2005Fibre-reinforced plastic composites – Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999)
EN 15342:2007Plastics – Recycled Plastics – Characterization of polystyrene (PS) recyclates
EN 15343:2007Plastics – Recycled Plastics – Plastics recycling traceability and assessment of conformity and recycled content
EN 15344:2007Plastics – Recycled Plastics – Characterisation of Polyethylene (PE) recyclates
EN 15345:2007Plastics – Recycled Plastics – Characterisation of Polypropylene (PP) recyclates
EN 15346:2014Plastics – Recycled plastics – Characterization of poly(vinyl chloride) (PVC) recyclates
EN 15347:2007Plastics – Recycled Plastics – Characterisation of plastics wastes
EN 15348:2014Plastics – Recycled plastics – Characterization of poly(ethylene terephthalate) (PET) recyclates
CEN/TR 15351:2006Plastics – Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items
CEN/TR 15353:2007Plastics – Recycled plastics – Guidelines for the development of standards for recycled plastics
CEN/TS 15354:2006Plastics – Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) – Guidance for characterisation and designation
EN ISO 15512:2016Plastics – Determination of water content (ISO 15512:2016)
EN ISO 15527:2013Plastics – Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) – Requirements and test methods (ISO 15527:2010)
EN 15534-1:2014Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) – Part 1: Test methods for characterisation of compounds and products
CEN/TS 15534-2:2007Wood-plastics composites (WPC) – Part 2: Characterisation of WPC materials
EN 15534-4:2014Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) – Part 4: Specifications for decking profiles and tiles
EN 15534-5:2014Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) – Part 5: Specifications for cladding profiles and tiles
EN 15534-6:2015Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) – Part 6: Specifications for fencing profiles and elements
EN 15701:2016Plastics – Thermoplastic jackets for insulation products for building equipment and industrial installations – Requirements and test methods
EN 15702:2008Cellular Plastics – Cell count procedure for flexible and rigid polyurethane
EN ISO 15791-1:2013Plastics – Development and use of intermediate-scale fire tests for plastics products – Part 1: General guidance (ISO 15791-1:2014)
CEN/TR 15822:2009Plastics – Biodegradable plastics in or on soil – Recovery, disposal and related environmental issues
EN 15836-1:2010Plastics – Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools – Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
EN 15836-2:2010Plastics – Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools – Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
EN 15860:2010Plastics – Thermoplastic semi-finished products for machining – Requirements and test methods
CEN/TR 15932:2010Plastics – Recommendation for terminology and characterisation of biopolymers and bioplastics
CEN/TS 16010:2013Plastics – Recycled plastics – Sampling procedures for testing plastics waste and recyclates
CEN/TS 16011:2013Plastics – Recycled plastics – Sample preparation
EN ISO 16012:2015Plastics – Determination of linear dimensions of test specimens (ISO 16012:2015)
CEN/TS 16137:2011Plastics – Determination of bio-based carbon content
EN 16245-1:2013Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 1: General requirements
EN 16245-2:2013Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 2: Specific requirements for resin, curing systems, additives and modifiers
EN 16245-3:2013Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 3: Specific requirements for fibre
EN 16245-4:2013Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 4: Specific requirements for fabrics
EN 16245-5:2013Fibre-reinforced plastic composites – Declaration of raw material characteristics – Part 5: Specific requirements for core materials
CEN/TS 16295:2012Plastics – Declaration of the bio-based carbon content
EN 16296:2012Imperfections in thermoplastics welded joints – Quality levels
EN ISO 16396-1:2015Plastics – Polyamide (PA) moulding and extrusion materials – Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015)
EN ISO 16396-2:2017Plastics – Polyamide (PA) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
CEN/TS 16398:2012Plastics – Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics – Data sheet
EN 16465:2015Plastics – Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering
EN 16472:2014Plastics – Method for artificial accelerated photoageing using medium pressure mercury vapour lamps
EN 16795:2015Plastics – Method for estimating heat build up of flat surfaces by simulated solar radiation
CEN/TS 16861:2015Plastics – Recycled plastics – Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET)
CEN/TR 16862:2015Plastics welding supervisor – Task, responsibilities, knowledge, skills and competence
CEN/TS 16892:2015Plastics – Welding of thermoplastics – Specification of welding procedures
EN ISO 17556:2012Plastics – Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2012)
CEN/ISO TR 17801:2017Plastics – Standard table for reference global solar spectral irradiance at sea level – Horizontal, relative air mass 1 (ISO/TR 17801:2014)
EN ISO 17855-1:2014Plastics – Polyethylene (PE) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 17855-1:2014)
EN ISO 17855-2:2016Plastics – Polyethylene (PE) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
EN ISO 18064:2014Thermoplastic elastomers – Nomenclature and abbreviated terms (ISO 18064:2014)
CEN/ISO TR 18486:2017Plastics – Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/TR 18486:2016)
EN ISO 19062-1:2015Plastics – Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 19062-1:2015)
EN ISO 19063-1:2015Plastics – Impact-resistant polystyrene (PS-I) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 19063-1:2015)
EN ISO 19064-1:2015Plastics – Styrene/acrylonitrile (SAN) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 19064-1:2015)
EN ISO 19065-1:2014Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 1: Designation system and basis for specifications
EN ISO 19066-1:2014Plastics – Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 19066-1:2014)
EN ISO 19069-1:2015Plastics – Polypropylene (PP) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 19069-1:2015)
EN ISO 19069-2:2016Plastics – Polypropylene (PP) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
EN ISO 19712-1:2013Plastics – Decorative solid surfacing materials – Part 1: Classification and specifications (ISO 19712-1:2008)
EN ISO 19712-2:2013Plastics – Decorative solid surfacing materials – Part 2: Determination of properties – Sheet goods (ISO 19712-2:2007)
EN ISO 19712-3:2013Plastics – Decorative solid surfacing materials – Part 3: Determination of properties – Solid surface shapes (ISO 19712-3:2007)
EN ISO 20200:2015Plastics – Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200:2015)
EN ISO 20753:2014Plastics – Test specimens (ISO 20753:2008)
EN ISO 21509:2015Plastics and ebonite – Verification of Shore durometers (ISO 21509:2006)
EN ISO 21627-1:2009Plastics – Epoxy resins – Determination of chlorine content – Part 1: Inorganic chlorine (ISO 21627-1:2009)
EN ISO 21627-2:2009Plastics – Epoxy resins – Determination of chlorine content – Part 2: Easily saponifiable chlorine (ISO 21627-2:2009)
EN ISO 21627-3:2009Plastics – Epoxy resins – Determination of chlorine content – Part 3: Total chlorine (ISO 21627-3:2009)
EN ISO 22007-1:2012Plastics – Determination of thermal conductivity and thermal diffusivity – Part 1: General principles (ISO 22007-1:2009)
EN ISO 22007-2:2015Plastics – Determination of thermal conductivity and thermal diffusivity – Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015)
EN ISO 22007-3:2012Plastics – Determination of thermal conductivity and thermal diffusivity – Part 3: Temperature wave analysis method (ISO 22007-3:2008)
EN ISO 22007-4:2012Plastics – Determination of thermal conductivity and thermal diffusivity – Part 4: Laser flash method (ISO 22007-4:2008)
CEN ISO/TR 22007-5:2014Plastics – Determination of thermal conductivity and thermal diffusivity – Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011)
EN ISO 22007-6:2015Plastics – Determination of thermal conductivity and thermal diffusivity – Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014)
EN ISO 22088-1:2006Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 1: General guidance (ISO 22088-1:2006)
EN ISO 22088-2:2006Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 2: Constant tensile load method (ISO 22088-2:2006)
EN ISO 22088-3:2006Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 3: Bent strip method (ISO 22088-3:2006)
EN ISO 22088-4:2006Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 4: Ball or pin impression method (ISO 22088-4:2006)
EN ISO 22088-5:2009Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 5: Constant tensile deformation method (ISO 22088-5:2006)
EN ISO 22088-6:2009Plastics – Determination of resistance to environmental stress cracking (ESC) – Part 6: Slow strain rate method (ISO 22088-6:2006)
EN ISO 25137-1:2017Plastics – Sulfone polymer moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 25137-1:2009)
EN ISO 25137-2:2017Plastics – Sulfone polymer moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
EN ISO 25762:2012Plastics – Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
EN ISO 28941-1:2008Plastics – Poly(phenylene ether) (PPE) moulding and extrusion materials – Part 1: Designation system and basis for specifications (ISO 28941-1:2008)
EN ISO 29664:2017Plastics – Artificial weathering including acidic deposition (ISO 29664:2010)

Call Us

+90 533 197 19 81

Email Us

info@modulusmetal.com

FOLLOW US

       

Visit Us

Beştepe Mah. Nergiz Sok. Via Flat İş Merkezi 7/2 Kat:3 No: 87

06560 Yenimahalle/Ankara

TURKEY

© Modulus Metal 2017-2022    |    All Rights Reserved

 

Privacy Policy Proudly powered by WordPress