Home » Brass Alloys » CuZn28 (C25600) Deep-Drawing/Cartridge Brass, Soft Material Data Sheet
CuZn28 (C25600) Deep-Drawing/Cartridge Brass Material Data Sheet (Wrought, Soft)
CuZn28 C25600 Soft Overview
CuZn28 C25600 soft is a wrought brass (UNS C25600), known as deep-drawing/cartridge brass. Condition: Soft. This CuZn28 C25600 soft material data sheet covers its designation, chemical composition, physical, mechanical, thermal, electrical and magnetic properties, processing and corrosion behaviour, and standards with similar compositions. Looking for CuZn28 brass parts from Turkey (Türkiye)? Modulus Metal manufactures CNC machined CuZn28 brass parts in-house and inspects them before shipment.
CuZn28 Designation
CuZn28, wrought Condition Soft UNS number C25600 EN name CW504L ISO name CuZn28 JIS (Japanese) name C2560
CuZn28 Typical uses
Deep-drawn items including cartridge cases & heat exchangers (fresh clean water), cold-headed parts, hardware.
CuZn28 C25600 Soft Composition detail
Cu (copper) 70.9 – 73.1 % Fe (iron) 0 – 0.05 % Pb (lead) 0 – 0.05 % Zn (zinc) 26.9 – 29 %
CuZn28 Physical properties
CuZn28 C25600 Soft Mechanical properties
Young’s modulus 109 – 115 GPa Specific stiffness 12.7 – 13.5 MN.m/kg Yield strength (elastic limit) 110 – 120 MPa Tensile strength 315 – 330 MPa Specific strength 12.8 – 14 kN.m/kg Elongation 50 – 52 % strain Compressive strength 110 – 120 MPa Flexural modulus 109 – 115 GPa Flexural strength (modulus of rupture) 110 – 120 MPa Shear modulus 40.3 – 42.6 GPa Bulk modulus 118 – 124 GPa Poisson’s ratio 0.34 – 0.35 Shape factor 30 Hardness – Vickers 63 – 72 HV Elastic stored energy (springs) 53.9 – 64.4 kJ/m3 Fatigue strength at 10^7 cycles 151 – 156 MPa Fatigue strength model (stress range) Parameters: Stress Ratio = -1, Number of Cycles = 1e7cycles 146 – 161 MPa
CuZn28 Impact & fracture properties
Fracture toughness 70.4 – 73.1 MPa.m0.5 Toughness (G) 43.9 – 48.1 kJ/m2
CuZn28 C25600 Soft Thermal properties
Melting point 957 – 972 °C Maximum service temperature 200 – 210 °C Minimum service temperature -273 °C Thermal conductivity 120 – 126 W/m.°C Specific heat capacity 380 – 382 J/kg.°C Thermal expansion coefficient 17.9 – 19.1 µstrain/°C Thermal shock resistance 52.3 – 58.9 °C Thermal distortion resistance 6.39 – 6.92 MW/m Latent heat of fusion 220 – 240 kJ/kg
CuZn28 Electrical properties
Electrical resistivity 5.89 – 6.46 µohm.cm Electrical conductivity 26.7 – 29.3 %IACS Galvanic potential -0.3 – -0.22 V
CuZn28 Magnetic properties
Magnetic type Non-magnetic
CuZn28 Optical, aesthetic and acoustic properties
Transparency Opaque Acoustic velocity 3560 – 3670 m/s Mechanical loss coefficient (tan delta) 2.78e-4 – 3.31e-4
CuZn28 Processing properties
Metal casting Unsuitable Metal cold forming Excellent Metal hot forming Acceptable Metal press forming Excellent Metal deep drawing Excellent Machining speed 51.8 m/min Weldability Notes: Preheating and post weld heat treatments are required Good
CuZn28 Durability
Water (fresh) Excellent Water (salt) Excellent Weak acids Acceptable Strong acids Unacceptable Weak alkalis Excellent Strong alkalis Excellent Organic solvents Excellent Oxidation at 500C Limited use UV radiation (sunlight) Excellent Galling resistance (adhesive wear) Excellent Flammability Non-flammable
CuZn28 C25600 Soft Corrosion resistance
Stress corrosion cracking Note: Rated in ammoniacal; Other susceptible environments: Water, amine, dinitrogen tetroxide Highly susceptible
CuZn28 Notes
CuZn28 C25600 Soft Other notes (s)=soft; (1/2 h)=half hard; (h)=hard; (xh)=extra hard; (hr) = hot rolled; (w)=soln heat-trtd; (wh)=soln heat-trtd & work hdnd; (wp)=soln heat-trtd & precip hdnd; (whp)=precip hdnd after cold-wkng; (wph)=work hdnd after precip hdng.
CuZn28 Standards with similar compositions
Europe: CW504L to CEN EN 12163Germany: 2.0261 to DIN, CuZn28 to DINUSA: C25600, UNS C25600Tradenames: ANGSBURG, COMMON TOMBAC, FUCHS 2172, GOLD LEAF, LATTEN (LAITON)-2, LYON’S GOLD, MESSING 72, NEUSTADT, PRINCES METAL NO. 1, PRYM 225, REVERE NO. 158, RUSSIAN-3, SM-1072, SPRING WIRE BRASS, WIELAND-M28
Modulus Metal Services
Manufacturing & Quality Services in Turkey