Home » Bronze Alloys » CuSn4 (C50900) 3% Phosphor Bronze, Soft Material Data Sheet
CuSn4 (C50900) 3% Phosphor Bronze Material Data Sheet (Wrought, Soft)
CuSn4 C50900 Soft Overview
CuSn4 C50900 soft is a wrought bronze (UNS C50900, EN CW450K), known as 3% phosphor bronze. Condition: Soft. This CuSn4 C50900 soft material data sheet covers its designation, chemical composition, physical, mechanical, thermal, electrical and magnetic properties, processing and corrosion behaviour, and standards with similar compositions. Looking for C50900 bronze parts from Turkey (Türkiye)? Modulus Metal manufactures CNC machined C50900 bronze parts in-house and inspects them before shipment.
C50900 Designation
CuSn4, wrought Condition Soft UNS number C50900 EN name CW450K ISO name CuSn4 GB (Chinese) name QSn4-0.3 JIS (Japanese) name C5111
C50900 Typical uses
Tube plates for condensers & pressure vessels, bellows & diaphragms, masonry fixings, screws, bolts, rivets, washers, springs, clips, electrical contacts, switch parts, instrument components.
CuSn4 C50900 Soft Composition detail
Cu (copper) 95.4 – 97.5 % Fe (iron) 0 – 0.1 % P (phosphorus) 0.03 – 0.3 % Pb (lead) 0 – 0.05 % Sn (tin) 2.5 – 3.8 % Zn (zinc) 0 – 0.3 %
C50900 Physical properties
CuSn4 C50900 Soft Mechanical properties
Young’s modulus 118 – 122 GPa Specific stiffness 13.3 – 13.8 MN.m/kg Yield strength (elastic limit) 100 – 110 MPa Tensile strength 310 – 320 MPa Specific strength 11.3 – 12.4 kN.m/kg Elongation 54 – 55 % strain Compressive strength 100 – 110 MPa Flexural modulus 118 – 122 GPa Flexural strength (modulus of rupture) 100 – 110 MPa Shear modulus 43.7 – 45.1 GPa Bulk modulus 127 – 132 GPa Poisson’s ratio 0.34 – 0.35 Shape factor 30 Hardness – Vickers 70 – 75 HV Hardness – Brinell 63 – 67 HB Elastic stored energy (springs) 41.7 – 50.4 kJ/m3 Fatigue strength at 10^7 cycles 150 – 153 MPa Fatigue strength model (stress range) Parameters: Stress Ratio = -1, Number of Cycles = 1e7cycles 147 – 157 MPa
C50900 Impact & fracture properties
Fracture toughness 73.1 – 76 MPa.m0.5 Toughness (G) 44.4 – 48.3 kJ/m2
CuSn4 C50900 Soft Thermal properties
Melting point 947 – 1070 °C Maximum service temperature 150 – 160 °C Minimum service temperature -273 °C Thermal conductivity 84 – 86 W/m.°C Specific heat capacity 385 J/kg.°C Thermal expansion coefficient 16.5 – 17.5 µstrain/°C Thermal shock resistance 48.5 – 54.5 °C Thermal distortion resistance 4.85 – 5.16 MW/m Latent heat of fusion 220 – 240 kJ/kg
C50900 Electrical properties
Electrical resistivity 11.3 – 11.7 µohm.cm Electrical conductivity 14.7 – 15.3 %IACS Temperature dependence of resistivity 2 – 2.5 /°C Galvanic potential -0.21 – -0.13 V
C50900 Magnetic properties
Magnetic type Non-magnetic
C50900 Optical, aesthetic and acoustic properties
Transparency Opaque Acoustic velocity 3650 – 3720 m/s Mechanical loss coefficient (tan delta) 3.31e-4 – 4e-4
C50900 Processing properties
Metal casting Unsuitable Metal cold forming Excellent Metal hot forming Limited use Metal press forming Excellent Metal deep drawing Acceptable Machining speed 33.5 m/min Weldability Notes: Preheating and post weld heat treatments are required Good
C50900 Durability
Water (fresh) Excellent Water (salt) Excellent Weak acids Acceptable Strong acids Unacceptable Weak alkalis Excellent Strong alkalis Excellent Organic solvents Excellent Oxidation at 500C Limited use UV radiation (sunlight) Excellent Galling resistance (adhesive wear) Excellent Flammability Non-flammable
CuSn4 C50900 Soft Corrosion resistance
Stress corrosion cracking Note: Rated in ammoniacal; Other susceptible environments: Water, amine, dinitrogen tetroxide Slightly susceptible
C50900 Notes
CuSn4 C50900 Soft Other notes (s)=soft; (1/2 h)=half hard; (h)=hard; (xh)=extra hard; (hr) = hot rolled; (w)=soln heat-trtd; (wh)=soln heat-trtd & work hdnd; (wp)=soln heat-trtd & precip hdnd; (whp)=precip hdnd after cold-wkng; (wph)=work hdnd after precip hdng.
C50900 Standards with similar compositions
UK: PB101 to BS 2870, PB101 to BS 2875USA: C50900, UNS C50800, UNS C50900Tradenames: BOLTON NO. 12 PHOSPHOR BRONZE, BRONZE, PHOSPHOR GRADE A, ELEPHANT BRAND NO. 3 METAL, HI-10, M.S. BRONZE, PHOSPHOR BRONZE 301, RIVERSIDE GRADE E PHOSPHOR BRONZE, SEYMOUR 9370, SEYMOUR 971, SEYMOUR 9971, SUPER X PHOSPHOR BRONZE GR. E ALLOY 101
Modulus Metal Services
Manufacturing & Quality Services in Turkey