CuSn11P (C90710) Phosphor Bronze, Cast Material Data Sheet

CuSn11P (C90710) Phosphor Bronze Material Data Sheet (Cast)

CuSn11P C90710 Cast Overview

CuSn11P C90710 cast is a cast bronze (UNS C90710), known as phosphor bronze. Condition: Cast. This CuSn11P C90710 cast material data sheet covers its designation, chemical composition, physical, mechanical, thermal, electrical and magnetic properties, processing and corrosion behaviour, and standards with similar compositions. Looking for C90710 bronze castings from Turkey (Türkiye)? Modulus Metal supplies C90710 bronze castings with in-house CNC machining and inspects them before shipment.

C90710 Designation

CuSn11P
UNS numberC90710
ISO nameCuSn11P

C90710 Typical uses

High-heat grade gears, bearings & bushes for heavy-duty and adequate lubrication, pump gears etc in corrosive conditions.

CuSn11P C90710 Cast Composition detail

Al (aluminum)0–0.005%
Cu (copper)86–89.5%
Fe (iron)0–0.1%
Ni (nickel)0–0.1%
P (phosphorus)0.5–1.2%
Pb (lead)0–0.25%
S (sulfur)0–0.05%
Sb (antimony)0–0.2%
Si (silicon)0–0.005%
Sn (tin)10–12%
Zn (zinc)0–0.05%

C90710 Physical properties

Density8.8–8.82g/cm3

CuSn11P C90710 Cast Mechanical properties

Young’s modulus78–82GPa
Specific stiffness8.85–9.31MN.m/kg
Yield strength (elastic limit)170–230MPa
Tensile strength310–390MPa
Specific strength19.3–26.1kN.m/kg
Elongation2–8% strain
Compressive strength170–230MPa
Flexural modulus78–82GPa
Flexural strength (modulus of rupture)170–230MPa
Shear modulus28.9–30.3GPa
Bulk modulus84.2–88.6GPa
Poisson’s ratio0.34–0.35 
Shape factor25
Hardness – Vickers95–150HV
Elastic stored energy (springs)184–324kJ/m3
Fatigue strength at 10^7 cycles150–174MPa
Fatigue strength model (stress range)
Parameters: Stress Ratio = -1, Number of Cycles = 1e7cycles
128–203MPa

C90710 Impact & fracture properties

Fracture toughness50–59.4MPa.m0.5
Toughness (G)31.4–43.9kJ/m2

CuSn11P C90710 Cast Thermal properties

Melting point885–1040°C
Maximum service temperature150–170°C
Minimum service temperature-273  °C
Thermal conductivity40–45W/m.°C
Specific heat capacity376–392J/kg.°C
Thermal expansion coefficient18–19µstrain/°C
Thermal shock resistance115–156°C
Thermal distortion resistance2.15–2.45MW/m
Latent heat of fusion220–240kJ/kg

C90710 Electrical properties

Electrical resistivity18.2–20.4µohm.cm
Electrical conductivity8.45–9.47%IACS
Galvanic potential-0.24–-0.16V

C90710 Magnetic properties

Magnetic typeNon-magnetic

C90710 Optical, aesthetic and acoustic properties

TransparencyOpaque
Acoustic velocity2980–3050m/s
Mechanical loss coefficient (tan delta)7.6e-5–1.38e-4 

C90710 Processing properties

Metal castingExcellent
Metal cold formingUnsuitable
Metal hot formingUnsuitable
Metal press formingUnsuitable
Metal deep drawingUnsuitable
Machining speed33.5 m/min
Weldability
Notes: Preheating and post weld heat treatments are required, and contains hazardous elements
Excellent

C90710 Durability

Water (fresh)Excellent
Water (salt)Excellent
Weak acidsAcceptable
Strong acidsUnacceptable
Weak alkalisExcellent
Strong alkalisExcellent
Organic solventsExcellent
Oxidation at 500CLimited use
UV radiation (sunlight)Excellent
Galling resistance (adhesive wear)Excellent
FlammabilityNon-flammable

CuSn11P C90710 Cast Corrosion resistance

Stress corrosion cracking
Note: Rated in ammoniacal; Other susceptible environments: Water, amine, dinitrogen tetroxide
Slightly susceptible

C90710 Notes

CuSn11P C90710 Cast Other notes
(s)=soft; (1/2 h)=half hard; (h)=hard; (xh)=extra hard; (hr) = hot rolled; (w)=soln heat-trtd; (wh)=soln heat-trtd & work hdnd; (wp)=soln heat-trtd & precip hdnd; (whp)=precip hdnd after cold-wkng; (wph)=work hdnd after precip hdng.

C90710 Standards with similar compositions

Australia: C90710 to AS 2738, C90810 to AS 2738
Europe: CB481K to CEN EN 1982, CC481K to CEN EN 1982
International: CuSn10P to ISO 1338, CuSn10P to ISO 4382-1
USA: C90710, C90710 to CDA Datasheet, C90800, UNS C90710, UNS C90800, UNS C90810
Tradenames: ENDURANCE AA, HOLFOS B O, HOLFOS B O H T