CuSn7Pb3 (C93100) Leaded Phosphor Bronze, Cast Material Data Sheet

CuSn7Pb3 (C93100) Leaded Phosphor Bronze Material Data Sheet (Cast)

CuSn7Pb3 C93100 Cast Overview

CuSn7Pb3 C93100 cast is a cast bronze (UNS C93100), known as leaded phosphor bronze. Condition: Cast. This CuSn7Pb3 C93100 cast material data sheet covers its designation, chemical composition, physical, mechanical, thermal, electrical and magnetic properties, processing and corrosion behaviour, and standards with similar compositions. Looking for C93100 bronze castings from Turkey (Türkiye)? Modulus Metal supplies C93100 bronze castings with in-house CNC machining and inspects them before shipment.

C93100 Designation

CuSn7Pb3
UNS numberC93100
ISO nameCuSn8Pb4Zn1

C93100 Typical uses

Light-duty bearings and bushes.

CuSn7Pb3 C93100 Cast Composition detail

Al (aluminum)0–0.005%
Cu (copper)81.4–91.5%
Fe (iron)0–0.25%
Ni (nickel)0–1%
P (phosphorus)0–1.5%
Pb (lead)2–5%
S (sulfur)0–0.05%
Sb (antimony)0–0.25%
Si (silicon)0–0.005%
Sn (tin)6.5–8.5%
Zn (zinc)0–2%

C93100 Physical properties

Density8.83–8.85g/cm3

CuSn7Pb3 C93100 Cast Mechanical properties

Young’s modulus74–76GPa
Specific stiffness8.37–8.6MN.m/kg
Yield strength (elastic limit)130–200MPa
Tensile strength270–360MPa
Specific strength14.7–22.6kN.m/kg
Elongation5–18% strain
Compressive strength130–200MPa
Flexural modulus74–76GPa
Flexural strength (modulus of rupture)130–200MPa
Shear modulus27.4–28.1GPa
Bulk modulus79.9–82.1GPa
Poisson’s ratio0.34–0.35 
Shape factor27
Hardness – Vickers85–110HV
Elastic stored energy (springs)117–257kJ/m3
Fatigue strength at 10^7 cycles137–165MPa
Fatigue strength model (stress range)
Parameters: Stress Ratio = -1, Number of Cycles = 1e7cycles
113–201MPa

C93100 Impact & fracture properties

Fracture toughness54.3–67.9MPa.m0.5
Toughness (G)39.7–60.8kJ/m2

CuSn7Pb3 C93100 Cast Thermal properties

Melting point882–1030°C
Maximum service temperature150–170°C
Minimum service temperature-273  °C
Thermal conductivity58–63W/m.°C
Specific heat capacity376–392J/kg.°C
Thermal expansion coefficient18–19µstrain/°C
Thermal shock resistance93.6–144°C
Thermal distortion resistance3.11–3.43MW/m
Latent heat of fusion220–240kJ/kg

C93100 Electrical properties

Electrical resistivity14.8–16.6µohm.cm
Electrical conductivity10.4–11.6%IACS
Galvanic potential-0.24–-0.16V

C93100 Magnetic properties

Magnetic typeNon-magnetic

C93100 Optical, aesthetic and acoustic properties

TransparencyOpaque
Acoustic velocity2890–2930m/s
Mechanical loss coefficient (tan delta)1e-4–2.37e-4 

C93100 Processing properties

Metal castingExcellent
Metal cold formingUnsuitable
Metal hot formingUnsuitable
Metal press formingUnsuitable
Metal deep drawingUnsuitable
Machining speed61 m/min
WeldabilityUnsuitable

C93100 Durability

Water (fresh)Excellent
Water (salt)Excellent
Weak acidsAcceptable
Strong acidsUnacceptable
Weak alkalisExcellent
Strong alkalisExcellent
Organic solventsExcellent
Oxidation at 500CLimited use
UV radiation (sunlight)Excellent
Galling resistance (adhesive wear)
Notes: Contains lead which lubricates, improving resistance.
Excellent
FlammabilityNon-flammable

CuSn7Pb3 C93100 Cast Corrosion resistance

Stress corrosion cracking
Note: Rated in ammoniacal; Other susceptible environments: Water, amine, dinitrogen tetroxide
Slightly susceptible

C93100 Notes

CuSn7Pb3 C93100 Cast Other notes
(s)=soft; (1/2 h)=half hard; (h)=hard; (xh)=extra hard; (hr) = hot rolled; (w)=soln heat-trtd; (wh)=soln heat-trtd & work hdnd; (wp)=soln heat-trtd & precip hdnd; (whp)=precip hdnd after cold-wkng; (wph)=work hdnd after precip hdng.

C93100 Standards with similar compositions

Australia: 931D to AS 1565
South Africa: Cu-Sn8Pb4P to SABS 200
USA: C93100, C93100 to CDA Datasheet, UNS C93100