Home » Precipitation Hardened Stainless Steels » Custom 450 H1150 Stainless Steel Material Data Sheet
Custom 450 H1150 Stainless Steel Material Data Sheet (Martensitic, Precipitation Hardened)
Custom 450 H1150 Stainless Steel Overview
Custom 450 H1150 stainless steel is a martensitic precipitation hardening stainless steel (UNS S45000) in the wrought form. Condition: H1150 (Solution annealed; precipitation (age) hardened at 621°C; air cooled). This Custom 450 H1150 stainless steel material data sheet covers its designation, chemical composition, physical, mechanical, thermal, electrical and magnetic properties, processing and corrosion behaviour, and standards with similar compositions. Looking for Custom 450 parts from Turkey (Türkiye)? Modulus Metal manufactures CNC machined Custom 450 parts in-house and inspects them before shipment.
Custom 450 Designation
Custom 450, wrought Condition H1150 (Solution annealed; precipitation (age) hardened at 621°C; air cooled) UNS number S45000 US name Custom 450
Custom 450 H1150 Stainless Steel Composition detail
C (carbon) 0 – 0.05 % Cr (chromium) 14 – 16 % Cu (copper) 1.25 – 1.75 % Fe (iron) 72.1 – 79.2 % Mn (manganese) 0 – 1 % Mo (molybdenum) 0.5 – 1 % Ni (nickel) 5 – 7 % P (phosphorus) 0 – 0.03 % S (sulfur) 0 – 0.03 % Si (silicon) 0 – 1 %
Custom 450 Physical properties
Custom 450 H1150 Stainless Steel Mechanical properties
Young’s modulus 200 – 210 GPa Specific stiffness 25.8 – 27.1 MN.m/kg Yield strength (elastic limit) 517 – 571 MPa Tensile strength 862 – 953 MPa Specific strength 66.7 – 73.7 kN.m/kg Elongation 14 – 23 % strain Compressive strength 860 – 951 MPa Flexural modulus 200 – 210 GPa Flexural strength (modulus of rupture) 517 – 571 MPa Shear modulus 77 – 80.9 GPa Bulk modulus 159 – 167 GPa Poisson’s ratio 0.29 – 0.302 Shape factor 44 Hardness – Vickers 292 – 320 HV Hardness – Rockwell B 103 – 107 HRB Hardness – Rockwell C 27 – 31 HRC Hardness – Brinell 264 – 293 HB Elastic stored energy (springs) 651 – 796 kJ/m3 Fatigue strength at 10^7 cycles 387 – 505 MPa Fatigue strength model (stress range) Parameters: Stress Ratio = -1, Number of Cycles = 1e7cycles 373 – 523 MPa
Custom 450 Impact & fracture properties
Fracture toughness 230 – 281 MPa.m0.5 Toughness (G) 259 – 381 kJ/m2
Custom 450 H1150 Stainless Steel Thermal properties
Melting point 1400 – 1440 °C Maximum service temperature 382 – 427 °C Minimum service temperature -73 – -43 °C Thermal conductivity 18 – 19.5 W/m.°C Specific heat capacity 490 – 510 J/kg.°C Thermal expansion coefficient 11 – 11.6 µstrain/°C Thermal shock resistance 221 – 250 °C Thermal distortion resistance 1.58 – 1.74 MW/m Latent heat of fusion 266 – 327 kJ/kg
Custom 450 Electrical properties
Electrical resistivity 75 – 90 µohm.cm Electrical conductivity 1.92 – 2.3 %IACS Galvanic potential -0.22 – -0.14 V
Custom 450 Magnetic properties
Custom 450 Optical, aesthetic and acoustic properties
Transparency Opaque Acoustic velocity 5080 – 5210 m/s Mechanical loss coefficient (tan delta) 3.1e-4 – 6.6e-4
Custom 450 Processing properties
Metal casting Unsuitable Metal cold forming Limited use Metal hot forming Acceptable Metal press forming Acceptable Metal deep drawing Unsuitable Machining speed 14.3 m/min Weldability Notes: Preheating is not required, post weld heat treatment is required Good Weldability – MIG Good Weldability – plasma Good Weldability – SAW Not recommended Weldability – TIG Good Brazeability Good Carbon equivalency 0.625 – 0.892
Custom 450 Durability
Water (fresh) Excellent Water (salt) Excellent Weak acids Excellent Strong acids Acceptable Weak alkalis Excellent Strong alkalis Limited use Organic solvents Excellent Oxidation at 500C Excellent UV radiation (sunlight) Excellent Galling resistance (adhesive wear) Notes: Aluminum bronze is the most suitable mating material to minimize galling. Limited use Flammability Non-flammable
Custom 450 H1150 Stainless Steel Corrosion resistance
Pitting resistance equivalent number (PREN) 15.7 – 19.3 Pitting and crevice corrosion Low (<20) Stress corrosion cracking Note: Rated in chloride; Other susceptible environments: Hydrogen sulfide Susceptible Intergranular (weld line) corrosion Good Inorganic acids Restricted Organic acids Moderate Alkalis Moderate Humidity / water Excellent Sea water Restricted Sour oil and gas Good
Custom 450 Standards with similar compositions
USA: S45000 to ASTM A564/A564M, S45000 to ASTM A693, S45000 to ASTM A705/A705M-95, S45000 to ASTM A959, UNS S45000Tradenames: CUSTOM 450 STAINLESS
Modulus Metal Services
Manufacturing & Quality Services in Turkey