Home » PEEK (Polyetheretherketone) » PEEK 10% Glass Fiber Material Data Sheet
PEEK 10% Glass Fiber (Polyetheretherketone) Material Data Sheet
PEEK 10% Glass Fiber Overview
PEEK 10% glass fiber is a grade of polyetheretherketone (PEEK), designated Polyetheretherketone (10% Glass Fiber). This PEEK 10% glass fiber material data sheet covers its designation and tradenames, composition, physical, mechanical, thermal, electrical and magnetic properties, and water absorption, processing properties and durability. Looking for PEEK parts from Turkey (Türkiye)? Modulus Metal manufactures CNC machined PEEK parts in-house and inspects them before shipment.
PEEK Designation
Polyetheretherketone (10% Glass Fiber) Tradenames Edgetek, Hifill, Instruc, LNP Thermocomp, RTP
PEEK Typical uses
Aerospace applications, automotive applications, consumer applications, general purpose, industrial applications, structural parts
PEEK 10% Glass Fiber Composition detail
Polymer 90 % Glass (fiber) 10 %
PEEK Physical properties
PEEK 10% Glass Fiber Mechanical properties
Young’s modulus 5.52 – 6.5 GPa Specific stiffness 4 – 4.71 MN.m/kg Yield strength (elastic limit) 103 – 120 MPa Tensile strength 107 – 125 MPa Specific strength 74.6 – 87 kN.m/kg Elongation 4 – 4.5 % strain Elongation at yield 2.44 – 4.14 % strain Compressive modulus 3.51 – 3.68 GPa Compressive strength 129 – 142 MPa Flexural modulus 5.17 – 6.01 GPa Flexural strength (modulus of rupture) 153 – 203 MPa Shear modulus 2.09 – 2.19 GPa Shear strength 64.6 – 71.2 MPa Bulk modulus 5.52 – 6.5 GPa Poisson’s ratio 0.39 – 0.41 Shape factor 5.5 Hardness – Vickers 27 – 29 HV Hardness – Rockwell R 118 – 124 Hardness – Shore D 89 – 96 Elastic stored energy (springs) 874 – 1220 kJ/m3 Fatigue strength at 10^7 cycles 41.1 – 49.7 MPa
PEEK Impact & fracture properties
Fracture toughness 6.12 – 8.81 MPa.m0.5 Toughness (G) 6.39 – 12.7 kJ/m2 Impact strength, notched 23 °C 4.6 – 8.5 kJ/m2 Impact strength, unnotched 23 °C 39.4 – 85.6 kJ/m2
PEEK 10% Glass Fiber Thermal properties
Melting point 343 °C Glass temperature 306 – 318 °C Heat deflection temperature 0.45MPa 285 – 326 °C Heat deflection temperature 1.8MPa 170 – 235 °C Maximum service temperature 220 – 250 °C Thermal conductivity 0.3 W/m.°C Specific heat capacity 1390 – 1450 J/kg.°C Thermal expansion coefficient 29 – 44 µstrain/°C Thermal shock resistance 413 – 654 °C Thermal distortion resistance 0.00682 – 0.0103 MW/m
PEEK Electrical properties
Electrical resistivity 10000000000000000000000 µohm.cm Electrical conductivity 1.72e-20 %IACS Dielectric constant (relative permittivity) 3.1 Dielectric strength (dielectric breakdown) 18 MV/m
PEEK Magnetic properties
Magnetic type Non-magnetic
PEEK Optical, aesthetic and acoustic properties
Transparency Opaque Acoustic velocity 2000 – 2170 m/s Mechanical loss coefficient (tan delta) 0.009 – 0.013
PEEK Absorption & permeability
Water absorption @ 24 hrs 0.102 – 0.32 % Humidity absorption @ sat 0.12 %
PEEK Processing properties
Polymer injection molding Limited use Polymer extrusion Limited use Polymer thermoforming Limited use Linear mold shrinkage 0.3 – 0.8 % Melt temperature 349 – 399 °C Mold temperature 149 – 218 °C Molding pressure range 82.7 – 124 MPa
PEEK Durability
Water (fresh) Excellent Water (salt) Excellent Weak acids Excellent Strong acids Unacceptable Weak alkalis Excellent Strong alkalis Excellent Organic solvents Excellent Oxidation at 500C Unacceptable UV radiation (sunlight) Excellent Flammability Self-extinguishing
Modulus Metal Services
Manufacturing & Quality Services in Turkey