PEK 40% Glass Fiber Material Data Sheet

PEK 40% Glass Fiber (Polyetherketone) Material Data Sheet

PEK 40% Glass Fiber Overview

PEK 40% glass fiber is a grade of polyetherketone (PEK), designated Polyetherketone (40% Glass Fiber). This PEK 40% glass fiber material data sheet covers its designation and tradenames, composition, physical, mechanical, thermal, electrical and magnetic properties, and water absorption, processing properties and durability. Looking for PEK parts from Turkey (Türkiye)? Modulus Metal manufactures CNC machined PEK parts in-house and inspects them before shipment.

PEK Designation

Polyetherketone (40% Glass Fiber)
TradenamesAvaspire

PEK Typical uses

Bearing cages, gear support bearings, thrust washers, clutch seals, transmission parts, housing for tire pressure sensors, valve spring discs, rollers, guides, gears, reciprocating components.

PEK 40% Glass Fiber Composition detail

Polymer60  %
Glass (fiber)40  %

PEK Physical properties

Density1.53–1.57g/cm3

PEK 40% Glass Fiber Mechanical properties

Young’s modulus12.8–13.4GPa
Specific stiffness8.23–8.67MN.m/kg
Yield strength (elastic limit)131–145MPa
Tensile strength164–181MPa
Specific strength84.5–93.6kN.m/kg
Elongation1.86–2.15% strain
Compressive modulus12.8–13.4GPa
Compressive strength213–235MPa
Flexural modulus14.1–14.8GPa
Flexural strength (modulus of rupture)263–290MPa
Shear modulus4.76–4.99GPa
Bulk modulus13.7–14.3GPa
Poisson’s ratio0.337–0.351 
Shape factor7.9
Hardness – Vickers39–43HV
Hardness – Rockwell M97–107 
Hardness – Rockwell R120–132 
Elastic stored energy (springs)657–801kJ/m3
Fatigue strength at 10^7 cycles60.5–78.7MPa

PEK Impact & fracture properties

Fracture toughness5.59–6.71MPa.m0.5
Toughness (G)2.4–3.41kJ/m2
Impact strength, notched 23 °C10–11kJ/m2

PEK 40% Glass Fiber Thermal properties

Melting point317–341°C
Glass temperature182–200°C
Heat deflection temperature 0.45MPa311–371°C
Heat deflection temperature 1.8MPa298–356°C
Vicat softening point311–371°C
Maximum service temperature232–252°C
Minimum service temperature-47–-27°C
Thermal conductivity0.423–0.457W/m.°C
Specific heat capacity1280–1330J/kg.°C
Thermal expansion coefficient31.7–33.1µstrain/°C
Thermal shock resistance307–344°C
Thermal distortion resistance0.013–0.0142MW/m

PEK Electrical properties

Electrical resistivity3300000000000000000000–30000000000000000000000µohm.cm
Electrical conductivity5.75e-21–5.22e-20%IACS
Dielectric constant (relative permittivity)3.14–3.46 
Dissipation factor (dielectric loss tangent)0.00398–0.00477 
Dielectric strength (dielectric breakdown)15.9–17.2MV/m
Comparative tracking index175–225V

PEK Magnetic properties

Magnetic typeNon-magnetic

PEK Optical, aesthetic and acoustic properties

TransparencyOpaque
Acoustic velocity2870–2950m/s
Mechanical loss coefficient (tan delta)0.0065–0.00671 

PEK Absorption & permeability

Water absorption @ 24 hrs0.0455–0.055%

PEK Processing properties

Polymer injection moldingLimited use
Polymer extrusionLimited use
Polymer thermoformingUnsuitable
Linear mold shrinkage0.1 – 0.9 %
Melt temperature334 – 429 °C
Molding pressure range68.8 – 138 MPa

PEK Durability

Water (fresh)Excellent
Water (salt)Excellent
Weak acidsExcellent
Strong acidsLimited use
Weak alkalisExcellent
Strong alkalisLimited use
Organic solventsExcellent
Oxidation at 500CUnacceptable
UV radiation (sunlight)Good
FlammabilitySelf-extinguishing