Gunmetal Alloys

Gunmetal Alloys

Gunmetal Alloys Overview

Gunmetal alloys are cast copper alloys based on copper, tin and zinc, often with lead or nickel added. This page lists the gunmetal grades with full material data sheets, including leaded, admiralty and nickel gunmetals.

Gunmetal Strengths

Gunmetal casts well into complex shapes and gives sound, pressure-tight castings. It resists corrosion in fresh water, seawater and steam, and it combines moderate strength with good wear resistance and bearing behaviour. The zinc content helps deoxidize the melt and improves fluidity, while tin raises strength and corrosion resistance.

Gunmetal Types

Admiralty gunmetal (CuSn10Zn2, C90500) is a lead-free, high-tin grade for demanding pressure and marine service. Leaded gunmetals such as CuPb5Sn5Zn5 (85-5-5-5, C83600) and 87-7-3-3 (C92410) contain lead for better machinability and pressure tightness. Nickel gunmetal (CuSn7Zn2Ni5) adds nickel for higher strength and can be age hardened.

Typical Uses of Gunmetal

Valve bodies and valve parts, pump casings and impellers, pipe fittings and flanges, steam and water fittings, bearings and bushings, marine hardware, gears and general pressure-containing castings.

Gunmetal Processing

Gunmetal is mostly produced by sand casting, centrifugal casting and continuous casting. Leaded grades machine freely and are the usual choice for parts that need extensive machining, while lead-free grades are preferred where lead content is restricted. Castings are normally finish machined to final dimensions.

Gunmetal Grades

Cast Gunmetal

C92410

Copper-lead alloy, 87-7-3-3, C92410, cast (leaded gunmetal)

CuSn7Zn2Ni5

Copper-nickel alloy, cast (nickel gunmetal)
Copper-nickel alloy, cast, aged (nickel gunmetal)

C83600

Copper-lead alloy, CuPb5Sn5Zn5 (85-5-5-5), C83600, cast (leaded gunmetal)

CuSn10Zn2 (C90500)

Copper, CuSn10Zn2, C90500, cast (admiralty gunmetal)

CuSn2ZnPb (C83810)

Copper-lead alloy, CuSn2ZnPb, C83810, cast (leaded gunmetal)