PH15-7Mo TH1050 Stainless Steel Material Data Sheet

PH15-7Mo TH1050 Stainless Steel Material Data Sheet (Semi-austenitic, Precipitation Hardened)

PH15-7Mo TH1050 Stainless Steel Overview

PH15-7Mo TH1050 stainless steel is a semi-austenitic precipitation hardening stainless steel (UNS S15700) in the wrought form. Condition: TH1050 (Solution annealed; precipitation (age) hardened at 566°C; air cooled). This PH15-7Mo TH1050 stainless steel material data sheet covers its designation, chemical composition, physical, mechanical, thermal, electrical and magnetic properties, processing and corrosion behaviour, and standards with similar compositions. Looking for PH15-7Mo parts from Turkey (Türkiye)? Modulus Metal manufactures CNC machined PH15-7Mo parts in-house and inspects them before shipment.

PH15-7Mo Designation

Korloy 2573, wrought
ConditionTH1050 (Solution annealed; precipitation (age) hardened at 566°C; air cooled)
UNS numberS15700
US namePH15-7Mo

PH15-7Mo Typical uses

Processing of potentially corrosive liquids e.g. chemicals/oil/beverages/sewage, structural uses in corrosive environments, e.g. nuclear plants, ships, offshore oil installations, underwater cables and pipes

PH15-7Mo TH1050 Stainless Steel Composition detail

Al (aluminum)0.75–1.5%
C (carbon)0–0.09%
Cr (chromium)14–16%
Fe (iron)69.6–76.8%
Mn (manganese)0–1%
Mo (molybdenum)2–3%
Ni (nickel)6.5–7.75%
P (phosphorus)0–0.04%
S (sulfur)0–0.03%
Si (silicon)0–1%

PH15-7Mo Physical properties

Density7.63–7.71g/cm3

PH15-7Mo TH1050 Stainless Steel Mechanical properties

Young’s modulus200–210GPa
Specific stiffness26.1–27.4MN.m/kg
Yield strength (elastic limit)1140–1260MPa
Tensile strength1280–1410MPa
Specific strength148–164kN.m/kg
Elongation2–6% strain
Compressive strength1250–1390MPa
Flexural modulus200–210GPa
Flexural strength (modulus of rupture)1140–1260MPa
Shear modulus79–83.1GPa
Bulk modulus152–159GPa
Poisson’s ratio0.28–0.291 
Shape factor20
Hardness – Vickers350–450HV
Hardness – Rockwell B113–116HRB
Hardness – Rockwell C42–47HRC
Hardness – Brinell394–436HB
Elastic stored energy (springs)3160–3860kJ/m3
Fatigue strength at 10^7 cycles510–590MPa
Fatigue strength model (stress range)
Parameters: Stress Ratio = -1, Number of Cycles = 1e7cycles
485–620MPa

PH15-7Mo Impact & fracture properties

Fracture toughness39.6–48.4MPa.m0.5
Toughness (G)7.71–11.3kJ/m2

PH15-7Mo TH1050 Stainless Steel Thermal properties

Melting point1400–1440°C
Maximum service temperature282–316°C
Minimum service temperature-73–-43°C
Thermal conductivity15.1–16.4W/m.°C
Specific heat capacity490–510J/kg.°C
Thermal expansion coefficient11–11.5µstrain/°C
Thermal shock resistance488–551°C
Thermal distortion resistance1.33–1.46MW/m
Latent heat of fusion250–256kJ/kg

PH15-7Mo Electrical properties

Electrical resistivity80–105µohm.cm
Electrical conductivity1.64–2.16%IACS
Galvanic potential-0.22–-0.14V

PH15-7Mo Magnetic properties

Magnetic typeMagnetic

PH15-7Mo Optical, aesthetic and acoustic properties

TransparencyOpaque
Acoustic velocity5110–5240m/s
Mechanical loss coefficient (tan delta)3.1e-4–6.6e-4 

PH15-7Mo Processing properties

Metal castingUnsuitable
Metal cold formingLimited use
Metal hot formingAcceptable
Metal press formingAcceptable
Metal deep drawingUnsuitable
Machining speed9.75 m/min
Weldability
Notes: Preheating is not required, post weld heat treatment is required
Good
Weldability – MIGGood
Weldability – plasmaGood
Weldability – SAWNot recommended
Weldability – TIGGood
BrazeabilityGood
Carbon equivalency0.708 – 1.02

PH15-7Mo Durability

Water (fresh)Excellent
Water (salt)Excellent
Weak acidsExcellent
Strong acidsAcceptable
Weak alkalisExcellent
Strong alkalisLimited use
Organic solventsExcellent
Oxidation at 500CExcellent
UV radiation (sunlight)Excellent
Galling resistance (adhesive wear)
Notes: Aluminum bronze is the most suitable mating material to minimize galling.
Acceptable
FlammabilityNon-flammable

PH15-7Mo TH1050 Stainless Steel Corrosion resistance

Pitting resistance equivalent number (PREN)20.6 – 25.9
Pitting and crevice corrosionMedium (20-30)
Stress corrosion cracking
Note: Rated in chloride; Other susceptible environments: Hydrogen sulfide
Susceptible
Intergranular (weld line) corrosionGood
Inorganic acidsRestricted
Organic acidsRestricted
AlkalisModerate
Humidity / waterExcellent
Sea waterRestricted
Sour oil and gasRestricted

PH15-7Mo Notes

PH15-7Mo TH1050 Warning
Check with supplier what tempering and aging procedure has been applied – it could make a major difference to the steel’s mechanical properties.

PH15-7Mo Standards with similar compositions

China: 0Cr15Ni7Mo2Al to GB 1220
France: Z8CNDA15.07 to AFNOR NF A35-581
Germany: 1.4532 to DIN EN 10088, X8CrNiMoAl15-7-2 to DIN EN 10088
USA: 5520 to AMS 5520, 63 to ASTM A579, PH 15-7 Mo to SAE J467, S15700 to ASTM A564/A564M, S15700 to ASTM A693, S15700 to ASTM A705/A705M-95, S15700 to ASTM A959, UNS S14800, UNS S15700, UNS S15780, UNS S15789
Tradenames: AL 15-7, KRUPP WL 1.4574, NIROSTA 4532, WIRONIT 151 L