FONDERIE DE MOULAGE AU SABLE EN TURQUIE

Sand Casting Foundry Products Cast Iron Steel Stainless Casting Turkey

Nous avons une base de fournisseurs certifiés ISO / IATF et nos fournisseurs partenaires sont expérimentés dans la fabrication de machines automobiles, aérospatiales, agricoles et industrielles depuis de nombreuses années.

Capacités de production : jusqu’à 2 000 kg/pièce

Quantité : 1 pièce aux gros volumes de production

Types de motifs : aluminium, bois, poly-uréthane, époxy (araldite)

Types de moulage : automatique, manuel

SABLE VERT
La Méthode:
Un mélange de sable et d’argile est emballé autour d’un modèle qui a la forme de moulage souhaitée dans GREEN SAND CASTING. Le motif est ensuite retiré pour révéler la cavité dans laquelle le métal en fusion est coulé. Lorsque le métal se solidifie, le moule est cassé afin d’obtenir la coulée. Lorsque de grands volumes de pièces moulées sont nécessaires, la technique de moulage au sable vert « automatisée » est utilisée et des modèles en aluminium sont utilisés car ils peuvent résister à l’usure des moulages fréquents. Le processus de moulage au sable vert « manuel » est utilisé lorsque de petites quantités de moulages sont nécessaires. Il utilise des motifs en bois car ils sont bon marché. Le compactage du moule est effectué manuellement à l’aide de pilonneuses à main, ce qui rend le moulage lent et laborieux.

Caractéristiques du processus : processus de mise en forme primaires, discrets

Informations techniques

La majorité des alliages, des aciers et des fontes à base d’aluminium et de cuivre conviennent à la méthode. Le matériau le plus couramment utilisé est la fonte. La méthode n’est pas adaptée aux métaux réfractaires ou réactifs.

Angle de dépouille : 1-5°

Qualité de surface : médiocre.

Tolérance d’usinage : 1,5-6 mm.

Section minimale : Typiquement 3 mm pour les alliages légers, 6 mm pour les alliages ferreux.

Material Grades:

EN 1561 / Gris (Flake Graphite) :EN GJL 100, EN GJL 150, EN GJL 200, EN GJL 250, EN GJL 300, EN GJL 350

EN 1563 / Nodulaire (Sphéroïdal, Ductile): EN GJS 350 22, EN GJS 350 22 LT, EN GJS 400 15U<30mm, EN GJS 400 18, EN GJS 400 18 LT, EN GJS 400 18U, EN GJS 450 10,EN GJS 500 7, EN GJS 600 3, EN GJS 700 2 coulé et normalisé, EN GJS 700 2 trempé et revenu, EN GJS 800 2 coulé et normalisé, EN GJS 800 2 trempé et revenu, EN GJS 900 2 coulé et normalisé, EN GJS 900 2 trempé et revenu

EN 1562 Malléable : cœur noir, perlitique, cœur blanc

Aciers au carbone, aciers inoxydables, aciers alliés

Aluminium et ses alliages.

Utilisations typiques:
Il existe de nombreuses applications du moulage au sable vert. Les bases de machines-outils, les structures et autres composants, les carters de pompe, les blocs moteurs à combustion interne et les culasses, les carters de transmission, les ébauches d’engrenages, les vilebrequins et les bielles en sont des exemples typiques.

SABLE SEC
Comme les moules en sable sec sont plus résistants et plus rigides, ils ont été largement utilisés dans la fabrication de pièces moulées lourdes massives. Pour les aciers coulés, du sable “skin-dry” (surface du moule séchée uniquement) est appliqué.

List of Casting Standards

FoundryTechnology:

EN 1370:2011 Founding – Examination of surface condition

EN 1371-1:2011 Founding – Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings

EN 1371-2:2015 Founding – Liquid penetrant inspection – Part 2: Investment castings

EN 1559-1:2011 Founding – Technical conditions of delivery – Part 1: General

EN 1559-3:2011 Founding – Technical conditions of delivery – Part 3: Additional requirements for iron castings

EN 1559-5:2017 Founding – Technical conditions of delivery – Part 5: Additional requirements for magnesium alloy castings

EN 1560:2011 Founding – Designation system for cast iron – Material symbols and material numbers

EN 1561:2011 Founding – Grey cast irons

EN 1562:2012 Founding – Malleable cast irons

EN 1563:2011 Founding – Spheroidal graphite cast irons

EN 1564:2011 Founding – Ausferritic spheroidal graphite cast irons

EN 1753:1997 Magnesium and magnesium alloys – Magnesium alloy ingots and castings

EN 1753:1997/AC:1997 Magnesium and magnesium alloys – Magnesium alloy ingots and castings

EN 1754:2015 Magnesium and magnesium alloys – Magnesium and magnesium alloy anodes, ingots and castings – Designation system

EN ISO 8062-1:2007 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 1: Vocabulary (ISO 8062-1:2007)

CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 2: Rules (ISO/TS 8062-2:2013, Corrected version 2013-11-01)

EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)

EN ISO 8062-3:2007/AC:2009 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007/Cor 1:2009)

EN ISO 10135:2009 Geometrical product specifications (GPS) – Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)

EN 12421:2017 Magnesium and magnesium alloys – Unalloyed magnesium

EN 12438:1998 Magnesium and magnesium alloys – Magnesium alloys for cast anodes

EN 12513:2011 Founding – Abrasion resistant cast irons

EN 12680-1:2003 Founding – Ultrasonic examination – Part 1: Steel castings for general purposes

EN 12680-2:2003 Founding – Ultrasonic examination – Part 2: Steel castings for highly stressed components

EN 12680-3:2011 Founding – Ultrasonic testing – Part 3: Spheroidal graphite cast iron castings

EN 12681:2003 Founding – Radiographic examination

EN 12883:2000 Founding – Equipment for the production of lost patterns for the lost wax casting process

EN 12890:2000 Founding – Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores

EN 12892:2000 Founding – Equipment for the production of lost patterns for the lost foam casting process

EN 13835:2012 Founding – Austenitic cast irons

EN 16079:2011 Founding – Compacted (vermicular) graphite cast irons

EN 16124:2011 Founding – Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications

EN 16482: 2014 Founding – Continuous cast iron bars

Steel Castings:

EN 1559-2:2014 Founding – Technical conditions of delivery – Part 2: Additional requirements for steel castings

EN 10213:2007+A1:2016 Steel castings for pressure purposes

EN 10283:2010 Corrosion resistant steel castings

EN 10293: 2015 Steel castings for general engineering uses

EN 10295:2002 Heat resistant steel castings

EN 10340:2007 Steel castings for structural uses

EN 10340:2007/AC:2008 Steel castings for structural uses

EN 10349:2009 Steel castings – Austenitic manganese steel castings

EN ISO 11970:2016 Specification and approval of welding procedures for production welding of steel castings (ISO 11970:2016)

Cast Iron Pipes, Fittings and Their Joints

Standard NoStandard
EN 545:2010Ductile iron pipes, fittings, accessories and their joints for water pipelines – Requirements and test methods
EN 598:2007+A1:2009Ductile iron pipes, fittings, accessories and their joints for sewerage applications – Requirements and test methods
EN 877:1999Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 877:1999/A1:2006Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 877:1999/A1:2006/AC:2008Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 969:2009Ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods
EN 12842:2012Ductile iron fittings for PVC-U or PE piping systems – Requirements and test methods
EN 14525:2004Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement
EN 14628:2005Ductile iron pipes, fittings and accessories – External polyethylene coating for pipes – Requirements and test methods
EN 14901:2014Ductile iron pipes, fittings and accessories – Epoxy coating (heavy duty) of ductile iron fittings and accessories – Requirements and test  methods
EN 15189:2006Ductile iron pipes, fittings and accessories – External polyurethane coating for pipes – Requirements and test methods
EN 15542:2008Ductile iron pipes, fittings and accessories – External cement mortar coating for pipes – Requirements and test methods
CEN/TR 15545:2006Guide to the use of EN 545
EN 15655:2009Ductile iron pipes, fittings and accessories – Internal polyurethane lining for pipes and fittings – Requirements and test methods
CEN/TR 16017:2010Guide to the use of EN 598
CEN/TR 16470:2013Environmental aspects of ductile iron pipe systems for water and sewerage applications
CEN/TR 16950:2016Ductile iron pipes, fittings and accessories – Sanitary characteristics and test methods

ASTM – GRAY IRON CASTINGS

ASTMAA126STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR VALVES, FLANGES, AND PIPE FITTINGS
ASTMAA159STANDARD SPECIFICATION FOR AUTOMOTIVE GRAY IRON CASTINGS R(1993)
ASTMAA278STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR PRESSURE-CONTAINING PARTS FOR TEMPERATURES UP TO 650 DEGREES F
ASTMAA278MSTANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR PRESSURE-CONTAINING PARTS FOR TEMPERATURES UP TO 350 DEGREES C E1-1996
ASTMAA319STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR ELEVATED TEMPERATURES FOR NON-PRESSURE CONTAINING PARTS R(1995)
ASTMAA436STANDARD SPECIFICATION FOR AUSTENITIC GRAY IRON CASTINGS E1-1997 R(1997)
ASTMAA48 REV ASTANDARD SPECIFICATION FOR GRAY IRON CASTINGS
ASTMAA48MSTANDARD SPECIFICATION FOR GRAY IRON CASTINGS (METRIC) E1-1998
ASTMAA748/A748MSTANDARD SPECIFICATION FOR STATICALLY CAST CHILLED WHITE IRON-GRAY IRON DUAL METAL ROLLS FOR PRESSURE VESSEL USE R(1993)
ASTMAA823STANDARD SPECIFICATION FOR STATICALLY CAST PERMANENT MOLD GRAY IRON CASTINGS
ASTMAA942STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST WHITE IRON/GRAY IRON DUAL METAL ABRASION-RESISTANT ROLL SHELLS
ASTMCC660STANDARD PRACTICES FOR PRODUCTION AND PREPARATION OF GRAY IRON CASTINGS FOR PORCELAIN ENAMELING R(1994)
ASTMEE802STANDARD REFERENCE RADIOGRAPHS FOR GRAY IRON CASTINGS UP TO 4 1/2 IN. (114 MM) IN THICKNESS

ASTM – DUCTILE IRON CASTINGS

ASTMAA395/A395MSTANDARD SPECIFICATION FOR FERRITIC DUCTILE IRON PRESSURE-RETAINING CASTINGS FOR USE AT ELEVATED TEMPERATURES
ASTMAA439STANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON CASTINGS E1-1994 R(1994)
ASTMAA476STANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS FOR PAPER MILL DRYER ROLLS R(1997)
ASTMAA476MSTANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS FOR PAPER MILL DRYER ROLLS (METRIC) R(1993)
ASTMAA536STANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS R(1993)
ASTMAA571STANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON CASTINGS FOR PRESSURE-CONTAINING PARTS SUITABLE FOR LOW-TEMPERATURE SERVICE E1-1992 R(1997)
ASTMAA571MSTANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON CASTINGS FOR PRESSURE-CONTAINING PARTS SUITABLE FOR LOW-TEMPERATURE SERVICE (METRIC) R(1997)
ASTMAA674STANDARD PRACTICE FOR POLYETHYLENE ENCASEMENT FOR DUCTILE IRON PIPE FOR WATER OR OTHER LIQUIDS
ASTMAA716STANDARD SPECIFICATION FOR DUCTILE IRON CULVERT PIPE
ASTMAA746STANDARD SPECIFICATION FOR DUCTILE IRON GRAVITY SEWER PIPE
ASTMAA874STANDARD SPECIFICATION FOR FERRITIC DUCTILE IRON CASTINGS SUITABLE FOR LOW-TEMPERATURE SERVICE R(1993)
ASTMAA874MSTANDARD SPECIFICATION FOR FERRITIC DUCTILE IRON CASTINGS SUITABLE FOR LOW-TEMPERATURE SERVICE (METRIC) R(1993)
ASTMAA897STANDARD SPECIFICATION FOR AUSTEMPERED DUCTILE IRON CASTINGS R(1997)
ASTMAA897MSTANDARD SPECIFICATION FOR AUSTEMPERED DUCTILE IRON CASTINGS (METRIC) R(1997)
ASTMEE689STANDARD REFERENCE RADIOGRAPHS FOR DUCTILE IRON CASTINGS