List of Investment Casting Standards

VDG P690
DIN 406-10 Technische Zeichnungen; Maßeintragungen; Begriffe, allge-meine Grundlagen
DIN 406-11 Technische Zeichnungen; Maßeintragungen; Grundlagen der Anwendung
DIN 406-11 Beiblatt 1 – Technische Zeichnungen – Maßeintragungen – Teil11: Grundlagen und Anwendung; Ausgang der Bearbei-tung an Rohteilen
DIN 406-12 Technische Zeichnungen; Maßeintragungen; Eintragung von Toleranzen für Längen- und Winkelmaße
DIN 1451 Teil 1–4 Schriften – Serifenlose Linear-Antiqua
DIN ISO 5459 Technische Zeichnungen; Form- und Lagetolerierung; Bezüge und Bezugssysteme für geometrische Toleranzen
DIN EN ISO 1101 Geometrische Produktspezifikation (GPS) – Geometrische Tolerierung – Tolerierung von Form, Richtung, Ort und Lauf
DIN EN ISO 1302 Geometrische Produktspezifikation (GPS) – Angabe der Ober-flächenbeschaffenheit in der technischen Produktdokumen-tation
DIN EN ISO 1302 Berichtigung 1 – Geometrische Produktspezifikation (GPS) – Angabe der Oberflächenbeschaffenheit in der technischen Produktdokumentation; Berichtigung zu DIN EN ISO 1302 (2002-06)
DIN EN ISO 5459 Norm-Entwurf – Geometrische Produktspezifikation (GPS) – Geometrische Tolerierung – Bezüge und Bezugssysteme
DIN EN ISO 8062-2Geometrische Produktspezifikation (GPS) – Maß-, Form- und Lagetoleranzen für Formteile – Teil 2: Regeln
DIN EN ISO 8062-3Geometrische Produktspezifikation (GPS) – Maß-, Form- und Lagetoleranzen für Formteile – Teil 3: Allgemeine Maß-, Form- und Lagetoleranzen und Bearbeitungszugaben für Gussstücke
DIN ISO 19959 Visuelle Überprüfung der Oberflächenbeschaffenheit von Feingussstücken – Stahl, Nickellegierungen und Cobaltlegie-rungen
BDG-Richtlinie P 510Maßliche Erstbemusterung auf der Basis von 3D-CAD-Daten
VDG-Merkblatt P 701Kennzeichnung von Gussteilen

ASTM

ASTMAA957STANDARD SPECIFICATION FOR INVESTMENT CASTINGS, STEEL AND ALLOY, COMMON REQUIREMENTS, FOR GENERAL INDUSTRIAL USE
ASTMBB403STANDARD SPECIFICATION FOR MAGNESIUM-ALLOY INVESTMENT CASTINGS
ASTMBB618STANDARD SPECIFICATION FOR ALUMINUM-ALLOY INVESTMENT CASTINGS

List of Casting Standards

FoundryTechnology:

EN 1370:2011 Founding – Examination of surface condition

EN 1371-1:2011 Founding – Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings

EN 1371-2:2015 Founding – Liquid penetrant inspection – Part 2: Investment castings

EN 1559-1:2011 Founding – Technical conditions of delivery – Part 1: General

EN 1559-3:2011 Founding – Technical conditions of delivery – Part 3: Additional requirements for iron castings

EN 1559-5:2017 Founding – Technical conditions of delivery – Part 5: Additional requirements for magnesium alloy castings

EN 1560:2011 Founding – Designation system for cast iron – Material symbols and material numbers

EN 1561:2011 Founding – Grey cast irons

EN 1562:2012 Founding – Malleable cast irons

EN 1563:2011 Founding – Spheroidal graphite cast irons

EN 1564:2011 Founding – Ausferritic spheroidal graphite cast irons

EN 1753:1997 Magnesium and magnesium alloys – Magnesium alloy ingots and castings

EN 1753:1997/AC:1997 Magnesium and magnesium alloys – Magnesium alloy ingots and castings

EN 1754:2015 Magnesium and magnesium alloys – Magnesium and magnesium alloy anodes, ingots and castings – Designation system

EN ISO 8062-1:2007 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 1: Vocabulary (ISO 8062-1:2007)

CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 2: Rules (ISO/TS 8062-2:2013, Corrected version 2013-11-01)

EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)

EN ISO 8062-3:2007/AC:2009 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007/Cor 1:2009)

EN ISO 10135:2009 Geometrical product specifications (GPS) – Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)

EN 12421:2017 Magnesium and magnesium alloys – Unalloyed magnesium

EN 12438:1998 Magnesium and magnesium alloys – Magnesium alloys for cast anodes

EN 12513:2011 Founding – Abrasion resistant cast irons

EN 12680-1:2003 Founding – Ultrasonic examination – Part 1: Steel castings for general purposes

EN 12680-2:2003 Founding – Ultrasonic examination – Part 2: Steel castings for highly stressed components

EN 12680-3:2011 Founding – Ultrasonic testing – Part 3: Spheroidal graphite cast iron castings

EN 12681:2003 Founding – Radiographic examination

EN 12883:2000 Founding – Equipment for the production of lost patterns for the lost wax casting process

EN 12890:2000 Founding – Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores

EN 12892:2000 Founding – Equipment for the production of lost patterns for the lost foam casting process

EN 13835:2012 Founding – Austenitic cast irons

EN 16079:2011 Founding – Compacted (vermicular) graphite cast irons

EN 16124:2011 Founding – Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications

EN 16482: 2014 Founding – Continuous cast iron bars

Steel Castings:

EN 1559-2:2014 Founding – Technical conditions of delivery – Part 2: Additional requirements for steel castings

EN 10213:2007+A1:2016 Steel castings for pressure purposes

EN 10283:2010 Corrosion resistant steel castings

EN 10293: 2015 Steel castings for general engineering uses

EN 10295:2002 Heat resistant steel castings

EN 10340:2007 Steel castings for structural uses

EN 10340:2007/AC:2008 Steel castings for structural uses

EN 10349:2009 Steel castings – Austenitic manganese steel castings

EN ISO 11970:2016 Specification and approval of welding procedures for production welding of steel castings (ISO 11970:2016)

Cast Iron Pipes, Fittings and Their Joints

Standard NoStandard
EN 545:2010Ductile iron pipes, fittings, accessories and their joints for water pipelines – Requirements and test methods
EN 598:2007+A1:2009Ductile iron pipes, fittings, accessories and their joints for sewerage applications – Requirements and test methods
EN 877:1999Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 877:1999/A1:2006Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 877:1999/A1:2006/AC:2008Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 969:2009Ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods
EN 12842:2012Ductile iron fittings for PVC-U or PE piping systems – Requirements and test methods
EN 14525:2004Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement
EN 14628:2005Ductile iron pipes, fittings and accessories – External polyethylene coating for pipes – Requirements and test methods
EN 14901:2014Ductile iron pipes, fittings and accessories – Epoxy coating (heavy duty) of ductile iron fittings and accessories – Requirements and test  methods
EN 15189:2006Ductile iron pipes, fittings and accessories – External polyurethane coating for pipes – Requirements and test methods
EN 15542:2008Ductile iron pipes, fittings and accessories – External cement mortar coating for pipes – Requirements and test methods
CEN/TR 15545:2006Guide to the use of EN 545
EN 15655:2009Ductile iron pipes, fittings and accessories – Internal polyurethane lining for pipes and fittings – Requirements and test methods
CEN/TR 16017:2010Guide to the use of EN 598
CEN/TR 16470:2013Environmental aspects of ductile iron pipe systems for water and sewerage applications
CEN/TR 16950:2016Ductile iron pipes, fittings and accessories – Sanitary characteristics and test methods

ASTM – GRAY IRON CASTINGS

ASTMAA126STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR VALVES, FLANGES, AND PIPE FITTINGS
ASTMAA159STANDARD SPECIFICATION FOR AUTOMOTIVE GRAY IRON CASTINGS R(1993)
ASTMAA278STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR PRESSURE-CONTAINING PARTS FOR TEMPERATURES UP TO 650 DEGREES F
ASTMAA278MSTANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR PRESSURE-CONTAINING PARTS FOR TEMPERATURES UP TO 350 DEGREES C E1-1996
ASTMAA319STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR ELEVATED TEMPERATURES FOR NON-PRESSURE CONTAINING PARTS R(1995)
ASTMAA436STANDARD SPECIFICATION FOR AUSTENITIC GRAY IRON CASTINGS E1-1997 R(1997)
ASTMAA48 REV ASTANDARD SPECIFICATION FOR GRAY IRON CASTINGS
ASTMAA48MSTANDARD SPECIFICATION FOR GRAY IRON CASTINGS (METRIC) E1-1998
ASTMAA748/A748MSTANDARD SPECIFICATION FOR STATICALLY CAST CHILLED WHITE IRON-GRAY IRON DUAL METAL ROLLS FOR PRESSURE VESSEL USE R(1993)
ASTMAA823STANDARD SPECIFICATION FOR STATICALLY CAST PERMANENT MOLD GRAY IRON CASTINGS
ASTMAA942STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST WHITE IRON/GRAY IRON DUAL METAL ABRASION-RESISTANT ROLL SHELLS
ASTMCC660STANDARD PRACTICES FOR PRODUCTION AND PREPARATION OF GRAY IRON CASTINGS FOR PORCELAIN ENAMELING R(1994)
ASTMEE802STANDARD REFERENCE RADIOGRAPHS FOR GRAY IRON CASTINGS UP TO 4 1/2 IN. (114 MM) IN THICKNESS

ASTM – DUCTILE IRON CASTINGS

ASTMAA395/A395MSTANDARD SPECIFICATION FOR FERRITIC DUCTILE IRON PRESSURE-RETAINING CASTINGS FOR USE AT ELEVATED TEMPERATURES
ASTMAA439STANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON CASTINGS E1-1994 R(1994)
ASTMAA476STANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS FOR PAPER MILL DRYER ROLLS R(1997)
ASTMAA476MSTANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS FOR PAPER MILL DRYER ROLLS (METRIC) R(1993)
ASTMAA536STANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS R(1993)
ASTMAA571STANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON CASTINGS FOR PRESSURE-CONTAINING PARTS SUITABLE FOR LOW-TEMPERATURE SERVICE E1-1992 R(1997)
ASTMAA571MSTANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON CASTINGS FOR PRESSURE-CONTAINING PARTS SUITABLE FOR LOW-TEMPERATURE SERVICE (METRIC) R(1997)
ASTMAA674STANDARD PRACTICE FOR POLYETHYLENE ENCASEMENT FOR DUCTILE IRON PIPE FOR WATER OR OTHER LIQUIDS
ASTMAA716STANDARD SPECIFICATION FOR DUCTILE IRON CULVERT PIPE
ASTMAA746STANDARD SPECIFICATION FOR DUCTILE IRON GRAVITY SEWER PIPE
ASTMAA874STANDARD SPECIFICATION FOR FERRITIC DUCTILE IRON CASTINGS SUITABLE FOR LOW-TEMPERATURE SERVICE R(1993)
ASTMAA874MSTANDARD SPECIFICATION FOR FERRITIC DUCTILE IRON CASTINGS SUITABLE FOR LOW-TEMPERATURE SERVICE (METRIC) R(1993)
ASTMAA897STANDARD SPECIFICATION FOR AUSTEMPERED DUCTILE IRON CASTINGS R(1997)
ASTMAA897MSTANDARD SPECIFICATION FOR AUSTEMPERED DUCTILE IRON CASTINGS (METRIC) R(1997)
ASTMEE689STANDARD REFERENCE RADIOGRAPHS FOR DUCTILE IRON CASTINGS