DIN 406-10 Technische Zeichnungen; Maßeintragungen; Begriffe, allge-meine Grundlagen
DIN 406-11 Technische Zeichnungen; Maßeintragungen; Grundlagen der Anwendung
DIN 406-11 Beiblatt 1 – Technische Zeichnungen – Maßeintragungen – Teil11: Grundlagen und Anwendung; Ausgang der Bearbei-tung an Rohteilen
DIN 406-12 Technische Zeichnungen; Maßeintragungen; Eintragung von Toleranzen für Längen- und Winkelmaße
DIN 1451 Teil 1–4 Schriften – Serifenlose Linear-Antiqua
DIN ISO 5459 Technische Zeichnungen; Form- und Lagetolerierung; Bezüge und Bezugssysteme für geometrische Toleranzen
DIN EN ISO 1101 Geometrische Produktspezifikation (GPS) – Geometrische Tolerierung – Tolerierung von Form, Richtung, Ort und Lauf
DIN EN ISO 1302 Geometrische Produktspezifikation (GPS) – Angabe der Ober-flächenbeschaffenheit in der technischen Produktdokumen-tation
DIN EN ISO 1302 Berichtigung 1 – Geometrische Produktspezifikation (GPS) – Angabe der Oberflächenbeschaffenheit in der technischen Produktdokumentation; Berichtigung zu DIN EN ISO 1302 (2002-06)
DIN EN ISO 5459 Norm-Entwurf – Geometrische Produktspezifikation (GPS) – Geometrische Tolerierung – Bezüge und Bezugssysteme
DIN EN ISO 8062-2Geometrische Produktspezifikation (GPS) – Maß-, Form- und Lagetoleranzen für Formteile – Teil 2: Regeln
DIN EN ISO 8062-3Geometrische Produktspezifikation (GPS) – Maß-, Form- und Lagetoleranzen für Formteile – Teil 3: Allgemeine Maß-, Form- und Lagetoleranzen und Bearbeitungszugaben für Gussstücke
DIN ISO 19959 Visuelle Überprüfung der Oberflächenbeschaffenheit von Feingussstücken – Stahl, Nickellegierungen und Cobaltlegie-rungen
BDG-Richtlinie P 510Maßliche Erstbemusterung auf der Basis von 3D-CAD-Daten
VDG-Merkblatt P 701Kennzeichnung von Gussteilen
ASTM
ASTM
A
A957
STANDARD SPECIFICATION FOR INVESTMENT CASTINGS, STEEL AND ALLOY, COMMON REQUIREMENTS, FOR GENERAL INDUSTRIAL USE
ASTM
B
B403
STANDARD SPECIFICATION FOR MAGNESIUM-ALLOY INVESTMENT CASTINGS
ASTM
B
B618
STANDARD SPECIFICATION FOR ALUMINUM-ALLOY INVESTMENT CASTINGS
EN 1370:2011 Founding – Examination of surface condition
EN 1371-1:2011 Founding – Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings
EN 1371-2:2015 Founding – Liquid penetrant inspection – Part 2: Investment castings
EN 1559-1:2011 Founding – Technical conditions of delivery – Part 1: General
EN 1559-3:2011 Founding – Technical conditions of delivery – Part 3: Additional requirements for iron castings
EN 1559-5:2017 Founding – Technical conditions of delivery – Part 5: Additional requirements for magnesium alloy castings
EN 1560:2011 Founding – Designation system for cast iron – Material symbols and material numbers
EN 1561:2011 Founding – Grey cast irons
EN 1562:2012 Founding – Malleable cast irons
EN 1563:2011 Founding – Spheroidal graphite cast irons
EN 1564:2011 Founding – Ausferritic spheroidal graphite cast irons
EN 1753:1997 Magnesium and magnesium alloys – Magnesium alloy ingots and castings
EN 1753:1997/AC:1997 Magnesium and magnesium alloys – Magnesium alloy ingots and castings
EN 1754:2015 Magnesium and magnesium alloys – Magnesium and magnesium alloy anodes, ingots and castings – Designation system
EN ISO 8062-1:2007 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 1: Vocabulary (ISO 8062-1:2007)
CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 2: Rules (ISO/TS 8062-2:2013, Corrected version 2013-11-01)
EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
EN ISO 8062-3:2007/AC:2009 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007/Cor 1:2009)
EN ISO 10135:2009 Geometrical product specifications (GPS) – Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
EN 12421:2017 Magnesium and magnesium alloys – Unalloyed magnesium
EN 12438:1998 Magnesium and magnesium alloys – Magnesium alloys for cast anodes
EN 12513:2011 Founding – Abrasion resistant cast irons
EN 12680-1:2003 Founding – Ultrasonic examination – Part 1: Steel castings for general purposes
EN 12680-2:2003 Founding – Ultrasonic examination – Part 2: Steel castings for highly stressed components
EN 12680-3:2011 Founding – Ultrasonic testing – Part 3: Spheroidal graphite cast iron castings
EN 12681:2003 Founding – Radiographic examination
EN 12883:2000 Founding – Equipment for the production of lost patterns for the lost wax casting process
EN 12890:2000 Founding – Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores
EN 12892:2000 Founding – Equipment for the production of lost patterns for the lost foam casting process
EN 13835:2012 Founding – Austenitic cast irons
EN 16079:2011 Founding – Compacted (vermicular) graphite cast irons
EN 16124:2011 Founding – Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications
EN 16482: 2014 Founding – Continuous cast iron bars
Steel Castings:
EN 1559-2:2014 Founding – Technical conditions of delivery – Part 2: Additional requirements for steel castings
EN 10213:2007+A1:2016 Steel castings for pressure purposes
EN 10283:2010 Corrosion resistant steel castings
EN 10293: 2015 Steel castings for general engineering uses
EN 10295:2002 Heat resistant steel castings
EN 10340:2007 Steel castings for structural uses
EN 10340:2007/AC:2008 Steel castings for structural uses
EN 10349:2009 Steel castings – Austenitic manganese steel castings
EN ISO 11970:2016 Specification and approval of welding procedures for production welding of steel castings (ISO 11970:2016)
Cast Iron Pipes, Fittings and Their Joints
Standard No
Standard
EN 545:2010
Ductile iron pipes, fittings, accessories and their joints for water pipelines – Requirements and test methods
EN 598:2007+A1:2009
Ductile iron pipes, fittings, accessories and their joints for sewerage applications – Requirements and test methods
EN 877:1999
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 877:1999/A1:2006
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 877:1999/A1:2006/AC:2008
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings – Requirements, test methods and quality assurance
EN 969:2009
Ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods
EN 12842:2012
Ductile iron fittings for PVC-U or PE piping systems – Requirements and test methods
EN 14525:2004
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement
EN 14628:2005
Ductile iron pipes, fittings and accessories – External polyethylene coating for pipes – Requirements and test methods
EN 14901:2014
Ductile iron pipes, fittings and accessories – Epoxy coating (heavy duty) of ductile iron fittings and accessories – Requirements and test methods
EN 15189:2006
Ductile iron pipes, fittings and accessories – External polyurethane coating for pipes – Requirements and test methods
EN 15542:2008
Ductile iron pipes, fittings and accessories – External cement mortar coating for pipes – Requirements and test methods
CEN/TR 15545:2006
Guide to the use of EN 545
EN 15655:2009
Ductile iron pipes, fittings and accessories – Internal polyurethane lining for pipes and fittings – Requirements and test methods
CEN/TR 16017:2010
Guide to the use of EN 598
CEN/TR 16470:2013
Environmental aspects of ductile iron pipe systems for water and sewerage applications
CEN/TR 16950:2016
Ductile iron pipes, fittings and accessories – Sanitary characteristics and test methods
ASTM – GRAY IRON CASTINGS
ASTM
A
A126
STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR VALVES, FLANGES, AND PIPE FITTINGS
ASTM
A
A159
STANDARD SPECIFICATION FOR AUTOMOTIVE GRAY IRON CASTINGS R(1993)
ASTM
A
A278
STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR PRESSURE-CONTAINING PARTS FOR TEMPERATURES UP TO 650 DEGREES F
ASTM
A
A278M
STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR PRESSURE-CONTAINING PARTS FOR TEMPERATURES UP TO 350 DEGREES C E1-1996
ASTM
A
A319
STANDARD SPECIFICATION FOR GRAY IRON CASTINGS FOR ELEVATED TEMPERATURES FOR NON-PRESSURE CONTAINING PARTS R(1995)
ASTM
A
A436
STANDARD SPECIFICATION FOR AUSTENITIC GRAY IRON CASTINGS E1-1997 R(1997)
ASTM
A
A48 REV A
STANDARD SPECIFICATION FOR GRAY IRON CASTINGS
ASTM
A
A48M
STANDARD SPECIFICATION FOR GRAY IRON CASTINGS (METRIC) E1-1998
ASTM
A
A748/A748M
STANDARD SPECIFICATION FOR STATICALLY CAST CHILLED WHITE IRON-GRAY IRON DUAL METAL ROLLS FOR PRESSURE VESSEL USE R(1993)
ASTM
A
A823
STANDARD SPECIFICATION FOR STATICALLY CAST PERMANENT MOLD GRAY IRON CASTINGS
ASTM
A
A942
STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST WHITE IRON/GRAY IRON DUAL METAL ABRASION-RESISTANT ROLL SHELLS
ASTM
C
C660
STANDARD PRACTICES FOR PRODUCTION AND PREPARATION OF GRAY IRON CASTINGS FOR PORCELAIN ENAMELING R(1994)
ASTM
E
E802
STANDARD REFERENCE RADIOGRAPHS FOR GRAY IRON CASTINGS UP TO 4 1/2 IN. (114 MM) IN THICKNESS
ASTM – DUCTILE IRON CASTINGS
ASTM
A
A395/A395M
STANDARD SPECIFICATION FOR FERRITIC DUCTILE IRON PRESSURE-RETAINING CASTINGS FOR USE AT ELEVATED TEMPERATURES
ASTM
A
A439
STANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON CASTINGS E1-1994 R(1994)
ASTM
A
A476
STANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS FOR PAPER MILL DRYER ROLLS R(1997)
ASTM
A
A476M
STANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS FOR PAPER MILL DRYER ROLLS (METRIC) R(1993)
ASTM
A
A536
STANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS R(1993)
ASTM
A
A571
STANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON CASTINGS FOR PRESSURE-CONTAINING PARTS SUITABLE FOR LOW-TEMPERATURE SERVICE E1-1992 R(1997)
ASTM
A
A571M
STANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON CASTINGS FOR PRESSURE-CONTAINING PARTS SUITABLE FOR LOW-TEMPERATURE SERVICE (METRIC) R(1997)
ASTM
A
A674
STANDARD PRACTICE FOR POLYETHYLENE ENCASEMENT FOR DUCTILE IRON PIPE FOR WATER OR OTHER LIQUIDS
ASTM
A
A716
STANDARD SPECIFICATION FOR DUCTILE IRON CULVERT PIPE
ASTM
A
A746
STANDARD SPECIFICATION FOR DUCTILE IRON GRAVITY SEWER PIPE
ASTM
A
A874
STANDARD SPECIFICATION FOR FERRITIC DUCTILE IRON CASTINGS SUITABLE FOR LOW-TEMPERATURE SERVICE R(1993)
ASTM
A
A874M
STANDARD SPECIFICATION FOR FERRITIC DUCTILE IRON CASTINGS SUITABLE FOR LOW-TEMPERATURE SERVICE (METRIC) R(1993)
ASTM
A
A897
STANDARD SPECIFICATION FOR AUSTEMPERED DUCTILE IRON CASTINGS R(1997)
ASTM
A
A897M
STANDARD SPECIFICATION FOR AUSTEMPERED DUCTILE IRON CASTINGS (METRIC) R(1997)
ASTM
E
E689
STANDARD REFERENCE RADIOGRAPHS FOR DUCTILE IRON CASTINGS
