ISO TC 60
| Standard No | Standard |
|---|---|
| ISO 53:1998 | Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile |
| ISO 54:1996 | Cylindrical gears for general engineering and for heavy engineering — Modules |
| ISO 677:1976 | Straight bevel gears for general engineering and heavy engineering — Basic rack |
| ISO 678:1976 | Straight bevel gears for general engineering and heavy engineering — Modules and diametral pitches |
| ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
| ISO 1328-2:1997 | Cylindrical gears — ISO system of accuracy — Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| ISO 8579-1:2002 | Acceptance code for gear units — Part 1: Test code for airborne sound |
| ISO/TR 10064-1:1992 | Code of inspection practice — Part 1: Inspection of corresponding flanks of gear teeth |
| ISO/TR 10064-1:1992/Cor 1:2006 | Code of inspection practice — Part 1: Inspection of corresponding flanks of gear teeth |
| ISO/TR 10064-2:1996 | Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO/TR 10064-2:1996/Cor 1:2001 | Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO/TR 10064-2:1996/Cor 2:2006 | Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| ISO/TR 10064-3:1996 | Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| ISO/TR 10064-3:1996/Cor 1:2006 | Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| ISO/TR 10064-4:1998 | Code of inspection practice — Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| ISO/TR 10064-4:1998/Cor 1:2006 | Code of inspection practice — Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| ISO/TR 10064-5:2005 | Code of inspection practice — Part 5: Recommendations relative to evaluation of gear measuring instruments |
| ISO/TR 10064-5:2005/Cor 1:2006 | Code of inspection practice — Part 5: Recommendations relative to evaluation of gear measuring instruments |
| ISO/TR 10064-6:2009 | Code of inspection practice — Part 6: Bevel gear measurement methods |
| ISO 17485:2006 | Bevel gears — ISO system of accuracy |
| ISO 18653:2003 | Gears — Evaluation of instruments for the measurement of individual gears |
| IEC 61400-4:2012 | Wind turbines — Part 4: Design requirements for wind turbine gearboxes |
NOMENCLATURE
| Standard No | Standard |
|---|---|
| ISO 701:1998 | International gear notation — Symbols for geometrical data |
| ISO 1122-1:1998 | Vocabulary of gear terms — Part 1: Definitions related to geometry |
| ISO 1122-1:1998/Cor 1:1999 | Vocabulary of gear terms — Part 1: Definitions related to geometry |
| ISO 1122-1:1998/Cor 2:2009 | Vocabulary of gear terms — Part 1: Definitions related to geometry |
| ISO 1122-2:1999 | Vocabulary of gear terms — Part 2: Definitions related to worm gear geometry |
| ISO 2490:2007 | Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module — Nominal dimensions |
| ISO 4468:2009 | Gear hobs — Accuracy requirements |
| ISO 4468:2009/Cor 1:2009 | Gear hobs — Accuracy requirements |
| ISO 10825:1995 | Gears — Wear and damage to gear teeth — Terminology |
| ISO/TR 10828:2015 | Worm gears — Worm profiles and gear mesh geometry |
| ISO/TR 14521:2010 | Gears — Calculation of load capacity of wormgears |
| ISO 21771:2007 | Gears — Cylindrical involute gears and gear pairs — Concepts and geometry |
CALCULATION
| Standard No | Standard |
|---|---|
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors |
| ISO 6336-1:2006/Cor 1:2008 | Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting) |
| ISO 6336-2:2006/Cor 1:2008 | Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting) |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength |
| ISO 6336-3:2006/Cor 1:2008 | Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials |
| ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears — Part 6: Calculation of service life under variable load |
| ISO 6336-6:2006/Cor 1:2007 | Calculation of load capacity of spur and helical gears — Part 6: Calculation of service life under variable load |
| ISO 9083:2001 | Calculation of load capacity of spur and helical gears — Application to marine gears |
| ISO 9085:2002 | Calculation of load capacity of spur and helical gears — Application for industrial gears |
| ISO 10300-1:2014 | Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors |
| ISO 10300-2:2014 | Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting) |
| ISO 10300-3:2014 | Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| ISO 14104:2017 | Gears — Surface temper etch inspection after grinding, chemical method |
| ISO/TR 14179-1:2001 | Gears — Thermal capacity — Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature |
| ISO/TR 14179-2:2001 | Gears — Thermal capacity — Part 2: Thermal load-carrying capacity |
| ISO 14635-1:2000 | Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
| ISO 14635-2:2004 | Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils |
| ISO 14635-3:2005 | Gears — FZG test procedures — Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| ISO/TR 15144-1:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears — Part 1: Introduction and basic principles |
| ISO/TR 15144-2:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears — Part 2: Examples of calculation for micropitting |
| ISO/TR 18792:2008 | Lubrication of industrial gear drives |
| ISO/TR 22849:2011 | Design recommendations for bevel gears |
| ISO 23509:2016 | Bevel and hypoid gear geometry |