| EN 853:2015 | Rubber hoses and hose assemblies – Wire braid reinforced hydraulic type – Specification |
| EN 854:2015 | Rubber hoses and hose assemblies – Textile reinforced hydraulic type – Specification |
| EN 856:2015 | Rubber hoses and hose assemblies – Rubber-covered spiral wire reinforced hydraulic type – Specification |
| EN 857:2015 | Rubber hoses and hose assemblies – Wire braid reinforced compact type for hydraulic applications – Specification |
| EN ISO 1307:2008 | Rubber and plastics hoses – Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006) |
| EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems – Specification |
| EN ISO 1401:2016 | Rubber hoses for agricultural spraying (ISO 1401:2016) |
| EN ISO 1402:2009 | Rubber and plastics hoses and hose assemblies – Hydrostatic testing (ISO 1402:2009) |
| EN ISO 1403:2008 | Rubber hoses, textile-reinforced, for general-purpose water applications – Specification (ISO 1403:2005) |
| EN 1761:1999 | Rubber hoses and hose assemblies for fuel truck delivery – Specification |
| EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) – Specification |
| EN 1765:2016 | Rubber hose assemblies for oil suction and discharge services – Specification for the assemblies |
| EN ISO 1825:2011 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling – Specification (ISO 1825:2010) |
| EN ISO 2398:2016 | Rubber hoses, textile-reinforced, for compressed air – Specification (ISO 2398:2016) |
| EN ISO 3861:2008 | Rubber hoses for sand and grit blasting – Specification (ISO 3861:2005) |
| EN ISO 3949:2014 | Plastics hoses and hose assemblies – Textile-reinforced types for hydraulic applications – Specification (ISO 3949:2009) |
| EN ISO 3994:2014 | Plastics hoses – Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials – Specification (ISO 3994:2014) |
| EN ISO 4023:2009 | Rubber hoses and hose assemblies for steam – Test methods (ISO 4023:2009) |
| EN ISO 4080:2009 | Rubber and plastics hoses and hose assemblies – Determination of permeability to gas (ISO 4080:2009) |
| EN ISO 4641:2016 | Rubber hoses and hose assemblies for water suction and discharge – Specification (ISO 4641:2016) |
| EN ISO 4671:2007 | Rubber and plastics hoses and hose assemblies – Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007) |
| EN ISO 4671:2007/A1:2011 | Rubber and plastics hoses and hose assemblies – Methods of measurement of the dimensions of hoses and the lengths of hose assemblies – Amendment 1: Clarification of position at which outside diameter is measured (ISO 4671:2007/Amd 1:2011) |
| EN ISO 5771:2008 | Rubber hoses and hose assemblies for transferring anhydrous ammonia – Specification (ISO 5771:2008) |
| EN ISO 5774:2016 | Plastics hoses – Textile-reinforced types for compressed-air applications – Specification (ISO 5774:2016) |
| EN ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam – Specification (ISO 6134:2017) |
| EN ISO 6224:2011 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications – Specification (ISO 6224:2011) |
| EN ISO 6802:2008 | Rubber and plastics hoses and hose assemblies with wire reinforcements – Hydraulic impulse test with flexing (ISO 6802:2005) |
| EN ISO 6803:2017 | Rubber or plastics hoses and hose assemblies – Hydraulic-pressure impulse test without flexing (ISO 6803:2017) |
| EN ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners – Specification (ISO 6806:2017) |
| EN ISO 6807:2003 | Rubber hoses and hose assemblies for rotary drilling and vibration applications – Specification (ISO 6807:2003) |
| EN ISO 6808:2014 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids – Specification (ISO 6808:2014) |
| EN ISO 7233:2016 | Rubber and plastics hoses and hose assemblies – Determination of resistance to vacuum (ISO 7233:2016) |
| EN ISO 7326:2016 | Rubber and plastics hoses – Assessment of ozone resistance under static conditions (ISO 7326:2016) |
| EN ISO 7662:1996 | Rubber and plastics hoses – Determination of abrasion of lining (ISO 7662:1988) |
| EN ISO 7751:2016 | Rubber and plastics hoses and hose assemblies – Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016) |
| EN ISO 8028:2000 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying – Specification (ISO 8028:1999) |
| EN ISO 8029:2014 | Plastics hose – General-purpose collapsible water hose, textile-reinforced – Specification (ISO 8029:2014) |
| EN ISO 8030:2014 | Rubber and plastics hoses – Method of test for flammability (ISO 8030:2014) |
| EN ISO 8031:2009 | Rubber and plastics hoses and hose assemblies – Determination of electrical resistance and conductivity (ISO 8031:2009) |
| EN ISO 8032:1999 | Rubber and plastics hose assemblies – Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997) |
| EN ISO 8033:2017 | Rubber and plastics hoses – Determination of adhesion between components (ISO 8033:2016) |
| EN ISO 8308:2015 | Rubber and plastics hoses and tubing – Determination of transmission of liquids through hose and tubing walls (ISO 8308:2015) |
| EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies – Vocabulary (ISO 8330:2014) |
| EN ISO 8331:2016 | Rubber and plastics hoses and hose assemblies – Guidelines for selection, storage, use and maintenance (ISO 8331:2016) |
| EN ISO 10619-1:2011 | Rubber and plastics hoses and tubing – Measurement of flexibility and stiffness – Part 1: Bending tests at ambient temperature (ISO 10619-1:2011) |
| EN ISO 10619-2:2011 | Rubber and plastics hoses and tubing – Measurement of flexibility and stiffness – Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011) |
| EN ISO 10619-3:2011 | Rubber and plastics hoses and tubing – Measurement of flexibility and stiffness – Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) |
| EN ISO 10960:1996 | Rubber and plastics hoses – Assessment of ozone resistance under dynamic conditions (ISO 10960:1994) |
| EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals – Specification |
| EN 13482:2013 | Rubber hoses and hose assemblies for asphalt and bitumen – Specification |
| EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems – Specification |
| EN 13765:2010+A1:2015 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals – Specification |
| EN 13766:2010 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas – Specification |
| EN 14420-1:2013 | Hose fittings with clamp units – Part 1: Requirements, types of fixing and connection, designation and testing |
| EN 14420-2:2013 | Hose fittings with clamp units – Part 2: Hose side parts of hose tail |
| EN 14420-3:2013 | Hose fittings with clamp units – Part 3: Clamp units, bolted or pinned |
| EN 14420-4:2013 | Hose fittings with clamp units – Part 4: Flange connections |
| EN 14420-5:2013 | Hose fittings with clamp units – Part 5: Threaded connections |
| EN 14420-6:2013 | Hose fittings with clamp units – Part 6: TW tank truck couplings |
| EN 14420-7:2013 | Hose fittings with clamp units – Part 7: Cam locking couplings |
| EN 14420-8:2013+A1:2016 | Hose fittings with clamp units – Part 8: Symmetrical half coupling (Guillemin system) |
| CEN/TS 14421:2006 | Hose tail and ferrule for crimping and swaging |
| EN 14422:2013 | Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| EN 14424:2013 | Hose fittings with screwed ferrules |
| EN 16643:2016 | Rubber and plastics hoses and hose assemblies – Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals – Specification |
| CEN/TS 16650:2014 | Specification for hose couplings for petrol, oil and lubricants – High pressure couplings |
| EN 16820:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry – Bonded elastomeric hoses with or without a lining |
| EN 16821:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry – Silicone rubber hoses |
| EN ISO 18752:2016 | Rubber hoses and hose assemblies – Wire- or textile-reinforced single-pressure types for hydraulic applications – Specification (ISO 18752:2014) |
| EN 26801:1993 | Rubber or plastics hoses – Determination of volumetric expansion (ISO 6801:1983) |
| EN 26801:1993/A1:2011 | Rubber or plastics hoses – Determination of volumetric expansion – Amendment 1: Deletion of alcohol as pressurizing fluid (ISO 6801:1983/Amd 1:2011) |
| EN ISO 28017:2011 | Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications – Specification (ISO 28017:2011) |
| EN ISO 28017:2011/A1:2015 | Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications – Specification – Amendment 1 (ISO 28017:2011/Amd 1:2015) |
| EN ISO 30013:2011 | Rubber and plastics hoses – Methods of exposure to laboratory light sources – Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
