List of Standards for Plastics and Rubber Hoses

Standard NoStandard
EN 853:2015Rubber hoses and hose assemblies – Wire braid reinforced hydraulic type – Specification
EN 854:2015Rubber hoses and hose assemblies – Textile reinforced hydraulic type – Specification
EN 856:2015Rubber hoses and hose assemblies – Rubber-covered spiral wire reinforced hydraulic type – Specification
EN 857:2015Rubber hoses and hose assemblies – Wire braid reinforced compact type for hydraulic applications – Specification
EN ISO 1307:2008Rubber and plastics hoses – Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006)
EN 1360:2013Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems – Specification
EN ISO 1401:2016Rubber hoses for agricultural spraying (ISO 1401:2016)
EN ISO 1402:2009Rubber and plastics hoses and hose assemblies – Hydrostatic testing (ISO 1402:2009)
EN ISO 1403:2008Rubber hoses, textile-reinforced, for general-purpose water applications – Specification (ISO 1403:2005)
EN 1761:1999Rubber hoses and hose assemblies for fuel truck delivery – Specification
EN 1762:2017Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) – Specification
EN 1765:2016Rubber hose assemblies for oil suction and discharge services – Specification for the assemblies
EN ISO 1825:2011Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling – Specification (ISO 1825:2010)
EN ISO 2398:2016Rubber hoses, textile-reinforced, for compressed air – Specification (ISO 2398:2016)
EN ISO 3861:2008Rubber hoses for sand and grit blasting – Specification (ISO 3861:2005)
EN ISO 3949:2014Plastics hoses and hose assemblies – Textile-reinforced types for hydraulic applications – Specification (ISO 3949:2009)
EN ISO 3994:2014Plastics hoses – Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials – Specification (ISO 3994:2014)
EN ISO 4023:2009Rubber hoses and hose assemblies for steam – Test methods (ISO 4023:2009)
EN ISO 4080:2009Rubber and plastics hoses and hose assemblies – Determination of permeability to gas (ISO 4080:2009)
EN ISO 4641:2016Rubber hoses and hose assemblies for water suction and discharge – Specification (ISO 4641:2016)
EN ISO 4671:2007Rubber and plastics hoses and hose assemblies – Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007)
EN ISO 4671:2007/A1:2011Rubber and plastics hoses and hose assemblies – Methods of measurement of the dimensions of hoses and the lengths of hose assemblies – Amendment 1: Clarification of position at which outside diameter is measured (ISO 4671:2007/Amd 1:2011)
EN ISO 5771:2008Rubber hoses and hose assemblies for transferring anhydrous ammonia – Specification (ISO 5771:2008)
EN ISO 5774:2016Plastics hoses – Textile-reinforced types for compressed-air applications – Specification (ISO 5774:2016)
EN ISO 6134:2017Rubber hoses and hose assemblies for saturated steam – Specification (ISO 6134:2017)
EN ISO 6224:2011Thermoplastics hoses, textile-reinforced, for general-purpose water applications – Specification (ISO 6224:2011)
EN ISO 6802:2008Rubber and plastics hoses and hose assemblies with wire reinforcements – Hydraulic impulse test with flexing (ISO 6802:2005)
EN ISO 6803:2017Rubber or plastics hoses and hose assemblies – Hydraulic-pressure impulse test without flexing (ISO 6803:2017)
EN ISO 6806:2017Rubber hoses and hose assemblies for use in oil burners – Specification (ISO 6806:2017)
EN ISO 6807:2003Rubber hoses and hose assemblies for rotary drilling and vibration applications – Specification (ISO 6807:2003)
EN ISO 6808:2014Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids – Specification (ISO 6808:2014)
EN ISO 7233:2016Rubber and plastics hoses and hose assemblies – Determination of resistance to vacuum (ISO 7233:2016)
EN ISO 7326:2016Rubber and plastics hoses – Assessment of ozone resistance under static conditions (ISO 7326:2016)
EN ISO 7662:1996Rubber and plastics hoses – Determination of abrasion of lining (ISO 7662:1988)
EN ISO 7751:2016Rubber and plastics hoses and hose assemblies – Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)
EN ISO 8028:2000Rubber and/or plastics hoses and hose assemblies for airless paint spraying – Specification (ISO 8028:1999)
EN ISO 8029:2014Plastics hose – General-purpose collapsible water hose, textile-reinforced – Specification (ISO 8029:2014)
EN ISO 8030:2014Rubber and plastics hoses – Method of test for flammability (ISO 8030:2014)
EN ISO 8031:2009Rubber and plastics hoses and hose assemblies – Determination of electrical resistance and conductivity (ISO 8031:2009)
EN ISO 8032:1999Rubber and plastics hose assemblies – Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997)
EN ISO 8033:2017Rubber and plastics hoses – Determination of adhesion between components (ISO 8033:2016)
EN ISO 8308:2015Rubber and plastics hoses and tubing – Determination of transmission of liquids through hose and tubing walls (ISO 8308:2015)
EN ISO 8330:2014Rubber and plastics hoses and hose assemblies – Vocabulary (ISO 8330:2014)
EN ISO 8331:2016Rubber and plastics hoses and hose assemblies – Guidelines for selection, storage, use and maintenance (ISO 8331:2016)
EN ISO 10619-1:2011Rubber and plastics hoses and tubing – Measurement of flexibility and stiffness – Part 1: Bending tests at ambient temperature (ISO 10619-1:2011)
EN ISO 10619-2:2011Rubber and plastics hoses and tubing – Measurement of flexibility and stiffness – Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011)
EN ISO 10619-3:2011Rubber and plastics hoses and tubing – Measurement of flexibility and stiffness – Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
EN ISO 10960:1996Rubber and plastics hoses – Assessment of ozone resistance under dynamic conditions (ISO 10960:1994)
EN 12115:2011Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals – Specification
EN 13482:2013Rubber hoses and hose assemblies for asphalt and bitumen – Specification
EN 13483:2013Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems – Specification
EN 13765:2010+A1:2015Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals – Specification
EN 13766:2010Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas – Specification
EN 14420-1:2013Hose fittings with clamp units – Part 1: Requirements, types of fixing and connection, designation and testing
EN 14420-2:2013Hose fittings with clamp units – Part 2: Hose side parts of hose tail
EN 14420-3:2013Hose fittings with clamp units – Part 3: Clamp units, bolted or pinned
EN 14420-4:2013Hose fittings with clamp units – Part 4: Flange connections
EN 14420-5:2013Hose fittings with clamp units – Part 5: Threaded connections
EN 14420-6:2013Hose fittings with clamp units – Part 6: TW tank truck couplings
EN 14420-7:2013Hose fittings with clamp units – Part 7: Cam locking couplings
EN 14420-8:2013+A1:2016Hose fittings with clamp units – Part 8: Symmetrical half coupling (Guillemin system)
CEN/TS 14421:2006Hose tail and ferrule for crimping and swaging
EN 14422:2013Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
EN 14423:2013+A1:2016Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
EN 14424:2013Hose fittings with screwed ferrules
EN 16643:2016Rubber and plastics hoses and hose assemblies – Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals – Specification
CEN/TS 16650:2014Specification for hose couplings for petrol, oil and lubricants – High pressure couplings
EN 16820:2017Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry – Bonded elastomeric hoses with or without a lining
EN 16821:2017Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry – Silicone rubber hoses
EN ISO 18752:2016Rubber hoses and hose assemblies – Wire- or textile-reinforced single-pressure types for hydraulic applications – Specification (ISO 18752:2014)
EN 26801:1993Rubber or plastics hoses – Determination of volumetric expansion (ISO 6801:1983)
EN 26801:1993/A1:2011Rubber or plastics hoses – Determination of volumetric expansion – Amendment 1: Deletion of alcohol as pressurizing fluid (ISO 6801:1983/Amd 1:2011)
EN ISO 28017:2011Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications – Specification (ISO 28017:2011)
EN ISO 28017:2011/A1:2015Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications – Specification – Amendment 1 (ISO 28017:2011/Amd 1:2015)
EN ISO 30013:2011Rubber and plastics hoses – Methods of exposure to laboratory light sources – Determination of changes in colour, appearance and other physical properties (ISO 30013:2011)

© Modulus Metal 2017-2022    |    All Rights Reserved